DT Research DT362GL Instrucciones de montaje
Rugged Handheld Tablet
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2020, DT Research, Inc. All Rights Reserved. BOG501120 DT362GL/ 362Q ENG
INTRODUCTION
Thank you for acquiring the DT362GL/ 362Q, part of DT Research’s line of Rugged
Tablets. Featuring a slim yet robust enclosure, the DT362GL/ 362Q with 6” TFT
display is powered by the Intel® Pentium® Silver quad-core or Qualcomm octa-core
processor, offering optimal combinations of performance and power savings. The
DT362GL/ 362Q is available with Microsoft® Windows® or Android operating system.
The software operating system features web browser, client/ server computing
software, media player, accessories, and applications support.
PACKAGE CONTENTS
• One DT362GL/ 362Q
• One Baery Pack
• AC-DC Power Adapter
• Basic Operaon Guide
* The actual package contents may vary depending on the conguraon acquired.
DT362GL/ 362Q
Button Functions
BUTTON ACTION
Power Buon
Trigger Buons
Baery Latch
Input/ Output Ports
USB Type-C Port (power input)
Data Capture Modules
Barcode Scanner (oponal)
Smart Card Reader (DT362GL only)
Back Camera (oponal)
NFC/UHF RFID Reader (oponal)
1
2
3
A
C
D
B
2
PRECAUTIONS
• Always exercise care when operang and handling the DT362GL/ 362Q
• Do not disassemble any poron of the DT362GL/ 362Q, as this will void any
product warranty.
• Do not use any power adapter or charging cradle other than the one provided with
the tablet or acquired from the manufacturer or its partners.
• In the unlikely event that abnormal noise, strange odor, or smoke is present,
immediately power down the DT362GL/ 362Q and disconnect all power sources.
Please report the problem to your device provider immediately.
The DT362GL/ 362Q
2
3A
C E DB 2 1
E
3
OPERATION
Powering ON and OFF
To acvate DT362GL/ 362Q, push and quickly release the Power Buon. The display
will come on in a few seconds. To put the DT362GL/ 362Q in standby mode, push and
quickly release the Power Buon. To turn the DT362GL/ 362Q o for extended storage,
power o safely using any soware funcon that “shuts down computer” provided in
the soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power - please use
the AC-DC adapter with the DT362GL/ 362Q when seng up for the rst me to
fully charge the baery pack.
NOTE:
To conserve power, push and quick release the Power Buon to make the tablet
in standby mode while not in use. Pushing briey on the same bu on will wake
up the system.
NOTE:
When the baery pack is charging, the blue-colored Baery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity
and the LED stays dark, the baery pack(s) may have been drained substanally.
Unplug/ replug the AC-DC adapter to the DT362GL/ 362Q a few mes to
acvate the charging process.
NOTE:
For DT362GL, avoid using the Power Buon (“hold 4+ seconds” feature) to turn
o the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operaon.
* The Handstrap and Digital Pen are oponal.
4
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless
LAN connecon may take 10-15 seconds to be established.
Wireless Networking
Wireless LAN
The DT362GL/ 362Q is oen delivered with an embedded (user-inaccessible)
802.11ac LAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT362GL/ 362Q should be
able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connecon.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT362GL/ 362Q
and the access points have to match. The SSID is case-sensive and it is recom-
mended that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves)
for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly congure
associated sengs such as Authencaon mode, etc.
• Refer to the access point operang manuals for seng up the 802.11 access
points.
Bluetooth
The Bluetooth conguraon applicaon is enabled from the Windows System Tray
or from the Android Sengs APP. Follow the instrucons and opons provided
within the applicaon to congure and invoke Bluetooth connecvity with the
corresponding peripherals.
5
UHF RFID Reader:
The oponal UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To
develop an applicaon to use the UHF RFID reader, contact your device provider for a
UHF RFID reader API package
Data Capture Module Operation Guide
If your DT362GL/ 362Q comes with a RFID Reader refer to the steps below to congure
the sengs.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
NOTE:
To ensure the system performance, turn on only the symbologies you are going to use.
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
67
Este manual sirve para los siguientes modelos
1
Otros manuales de Tableta de DT Research
DT Research
DT Research DT313Y Instrucciones de montaje
DT Research
DT Research DT300Q Instrucciones de montaje
DT Research
DT Research DT317BT Instrucciones de montaje
DT Research
DT Research DT395GS Instrucciones de montaje
DT Research
DT Research DT301X-TR Instrucciones de montaje
DT Research
DT Research DT301C Instrucciones de montaje
DT Research
DT Research DT370CR Instrucciones de montaje
DT Research
DT Research DT380CR Instrucciones de montaje
DT Research
DT Research DT311Y Instrucciones de montaje
DT Research
DT Research DT340T Instrucciones de montaje
DT Research
DT Research WebDT 360 Instrucciones de montaje
DT Research
DT Research DT363GL Instrucciones de montaje
DT Research
DT Research DT370CR Instrucciones de montaje
DT Research
DT Research DT313Cmed Instrucciones de montaje
DT Research
DT Research WebDT 312 Instrucciones de montaje
DT Research
DT Research DT311Y Instrucciones de montaje
DT Research
DT Research 302MD Instrucciones de montaje
DT Research
DT Research DT312 Instrucciones de montaje
DT Research
DT Research 316T Instrucciones de montaje
DT Research
DT Research 316T/MD Instrucciones de montaje
