Dreamline FLEX Series Manual de usuario

PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION

For more information about DreamLine®products please visit DreamLine.com

FLEX ENCLOSURE (34x46 & 34x58)

SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS

FLEX 34x46 & 34x58 Shower Enclosure Cover Page

STEP 2: Install Return Panel FLEX

ENCLOSURE

STEP 1: Install Shower Door

NOTE: Refer to the Return Panel Manual for Enclosure Installation dimensions.

FLEX 42x72“/ 48x72“/ 54x72”/ 60x72” / 60x58”

SHOWER DOOR INSTALLATION INSTRUCTIONS

IMPORTANT

DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice.

For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer

to your model’s web page on DreamLine.com

For more information about DreamLine®Shower Doors & Tub Doors please visit DreamLine.com

Right hand door installation shown

Please review this entire manual before starting the installation

MODEL #s

SHDR-22427200-##

SHDR-22487200-##

SHDR-22547200-##

SHDR-22607200-##

SHDR-22605800-##

##=finish

-01- Chrome

-04 - Brushed Nickel

Parts Diagram of Shower Door Components

Model Overview

Parts List

Table of Contents

Section title Page #

Tools

Preparation

Installation Steps

Vinyl Seals

Product Maintenance

16-17

7-19

This product should be installed by someone familiar with the

construction requirements for this type of product and the care

necessary for the safe installation and operation of the product.

These instructions will show the installation of the shower door model.

Please follow the same steps for the installation of the tub door model.

NOTE

If you have purchased the FLEX Shower Enclosure model:

Refer to the“Shower Enclosure Plan”in the manual that is

packaged with the return panel glass for the proper

dimension to install the door based on the enclosure size.

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece

count with your packing slip. After opening all boxes and packages read this introduction carefully.

Check that all of the needed parts are included in the package by checking off the components on

the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing

defect, or has missing parts, please contact our customer support department within 3 business

days of the delivery date. Please note that DreamLine®will not replace any damaged products

or missing parts free of charge after 3 business days or if the product has been installed.

Contact DreamLine®if you have any questions, and please provide an order number, job name or

other proof of purchase to help to identify the original order.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine®is

not responsible for code compliance standards for your project and will not accept any

returns.

3. If this unit is going to be installed in a new construction, please install all of the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required by local code)

plumber for all plumbing installation

4. Please make sure that prior to beginning the installation, the surfaces are leveled and solid and

will be able to support the total weight of the unit. Also make sure the walls are at right angles.

Irregular installation surface level, radius corners or improper angle of side walls will result in serious

problems for your installation. Please, note that some adjustments and drilling might be necessary

during the installation process.

5. Please protect all primary surfaces of the product during installation. Never set your glass down

directly onto a tile floor. Leave corner protectors in place until necessary to remove them. Always

use a piece of wood or cardboard to protect the bottom edge and corners of the glass prior to and

during installation.

6. This unit must be installed upon a finished threshold and against finished walls.

7. This model has 4” of total width adjustment: including 1/2” of adjustment per wall profile for

out-of-plumb wall conditions plus 3” of overall width adjustment with the expanding top and

bottom rails. Be sure that you have ordered the correct model size to fit your finished opening.

8. This model requires a minimum 1-3/8” of flat threshold space for installation.

9. Professional installation recommended.

NOTE: This door is reversible for right or left-hand door installation. See step #4 for details.

The right-hand door installation is shown as an example throughout this manual.

NOTE: DO NOT install the handle onto the door glass until instructed to do so.

DO NOT attempt to lift the glass using the handle. This could result in damage to

the glass and/or serious personal injury. Always use an assistant or a professional

grade glass suction cup when handling heavy glass.

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

Tools

Tip: Measure the finished opening before

proceeding with the installation to be sure

that the correct model size has been

ordered.

Tip: Prior to installation, cover the

shower/tub drain with tape to prevent

losing screws or small parts.

Tip: Set screw gun clutch to low setting

when installing screws and bolts to

prevent stripping the heads.

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in this manual as a reference. Before discarding the carton, check for small

hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,

please contact DreamLine® for replacement. The shipping boxes may contain extra parts not used in

your model configuration.

NOTE: Retain these installation instructions for future reference.

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

Tape Phillips

100% Silicone

(Ø=1/8")

(3mm)

Measure

Drill bit

Drill

Pencil

Level

Drill bit

Power

Screwdriver Razor Knife

(Ø=5/16")

(8mm) Hammer

Top

Middle

Bottom

Threshold must be level.

Parts Diagram of Shower Door Components

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

Parts List

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

This model is reversible for left or right-hand door installation. Determine the proper orientation

for the installation by considering access, shower head position and possible obstructions such

as a toilet or vanity. During the initial assembly, the entire frame can be flipped (upside down)

top to bottom for either left or right hand door installation.

1 Wall profile 2pcs

2 Panel Glass assembly

3 Wall anchor

6Decorative cap and washer

7Vinyl Seal with Flexible Fin 1pcs

8Bottom Sweep Vinyl 1pc

Magnetic Strike Profile

Handle

1pc

1set

Top & Bottom pivot Rail

17 Door Glass 1pc

4pcs

ST4.2×10 Round head screw

8pcs

ST4.2×40 Truss head screw

10pcs

8pcs

10pcs

1pc

ST4.2×25 Round head screw

Top & Bottom pivot Hardware

2pcs

Part#Part#

DESCRIPTION DESCRIPTION

QTY QTY

Right hand door installation

Left hand door installation

panel

door

Model Overview

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

Alluminum wall profile

Stationary panel glass assembly

Expandable rail

Door Glass

Alluminum wall profile

Expandable rail

Right hand door installation shown

Handle

panel door

Installation steps

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

60” model

◾SHDR-22427200-01 / SHDR-22487200-01 / SHDR-22547200-01: Insert the end that is closer to

the pivot hole

◾SHDR-22607200-01: Insert the end that is farther from the pivot hole

Fig 1

top

bottom

outside inside

pivot

hole

Right hand door installation shown

door

pivot

hole

insert

this end

42” and 48” model

door

23-5/8”

Insert the correct end of

the pivot rail based on the

model size. (See below)

*The pivot hole is very close to center

on the 54” model size. Double check

the dimensions before inserting the rails

54” model*

23-5/8”

23”

pivot

hole

pivot

hole

insert

this end

insert

this end

1. Insert the Top & Bottom Pivot Rails (#15) into the expandable rails of the Stationary panel

Assembly (#02). (Fig 1)

FLEX 42x72 48x72 54x72 60x72 60x58 Shower and Tub Door manual Ver 1 Rev 4 072019

Fig 2

TIP: Apply some wax or dish soap to the screws to make

assembly easier and to prevent stripping the screws.

inside

2. Attach the Magnetic Strike Profile (#12) to

the Top & Bottom Pivot Rails (#15) using four

of the ST4.2 x 25 Round Head Screws (#14).

(Fig 2)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Otro de Dreamline

Dreamline

Dreamline UNIDOOR Style C Manual de usuario

Dreamline

Dreamline ENIGMA Manual de usuario

Dreamline

Dreamline DLG-36 Manual de usuario

Dreamline

Dreamline ENIGMA-XO Manual de usuario

Dreamline

Dreamline QUATRA PLUS Series Manual de usuario

Dreamline

Dreamline ENIGMA Z Manual de usuario

Dreamline

Dreamline TETRA Manual de usuario

Dreamline

Dreamline PRISM PLUS E264072-134 Series Manual de usuario

Dreamline

Dreamline INFINITY-Z Manual de usuario

Dreamline

Dreamline Aqua Manual de usuario

Dreamline

Dreamline PRIME 31x31 Manual de usuario

Manuales populares de Otro de otras marcas

GO Industries

GO Industries 38017 Manual de usuario

Cissell

Cissell 30LBCMAN2 Manual de usuario

RIDGID

RIDGID K-60SP Manual de usuario

Gage Bilt

Gage Bilt GB751SH-5 Manual de usuario

OVE

OVE SIERRA 60 Manual de usuario

ReelCraft

ReelCraft 7800 OLB21 Manual de usuario

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Manual de usuario

ROBLIN

ROBLIN DROP Guía del usuario

EMG

EMG EMG-ACB BARREL Manual de servicio

MiniSolar

MiniSolar MT-150 Manual de usuario

Parkside

Parkside PSZ 250 B2 Manual de usuario

ABB

ABB REM 610 Manual del producto

Parkside

Parkside 55992 Manual del propietario

Skyjacker

Skyjacker F250 Manual de usuario

IBM

IBM IBM SYSTEM Z Guía de instalación

Grech Motors

Grech Motors G28 Manual de usuario

NOVAK

NOVAK BATTERY CARE SHEET Guía

Telemotive

Telemotive blue PiraT Mini Guía del usuario