Go Cart
STEP-BY-STEP
INSTRUCTIONS
Attach X-Support Pole (E) to Caster/Frame (C) using 3/8”Bolts (A).
Tighten bolts rmly, but do not completely tighten them down.
Repeat Step 1 for the other Caster/Frame (C).
Attach X-Support Pole (E) to the backside of the Caster/Frame (C)
using 3/8” Bolts (A). Tighten bolts rmly, but do not completely
tighten them down. Repeat Step 1 for the other Caster/Frame
(C).
Go Cart
STEP
2
Place Support Poles (D) to Caster/Frame (C) then using Support
Pole D-Clip (B). Do this for both Support Poles (D).
Lastly, double check all nuts and bolts used in assembly and be
sure they are tightened securely. Tighten any that are not secure.
STEP
1
STEP
3
STEP
4
