Dover Universal 5588 Series Manual de usuario
0608-001 AKZESO-P
INSTRUCTION
MANUAL Tape Feeder Installation Jig
Tape Feeder Installation Jig
INSTRUCTION MANUAL
Read this instruction manual carefully and keep it at hand.
•Before operating the machine, read these safety instructions
carefully and fully understand them.
•Always keep this instruction manual carefully at hand to refer it
anytime and anywhere.
5588 Series
UIC Manual ID No. 50391934
5588 Series
AKZESO-P
INSTRUCTION MANUAL
Tape Feeder Installation Jig
5588 Series
The instruction manual is compiled especially for the
operations of this unit.
Please read this manual carefully for correct
operations and pay special attention to safety
precautions.
After reading through this manual, please use this
manual as an occasional reference and keep it
within reach.
0608-001
G-S006-06
August, 2006 First Edition
SOM-1944-001
This manual is made of recycled paper.
Before using this manual, please note the following items.
1. The contents of this manual are subject to change for improvement
without prior notice. Please pay attention to the latest information that will
be provided or issued by our company.
2. The copyright of the instruction manual belongs to Universal Instruments
Corporation.
This manual shall not be copied, in whole or part, without written consent
of the publisher.
3. Our company shall not be held to any liability for any damages suffered or
incurred by the end user, arising from any operations other than those
(including the purposes and methods) described in this instruction manual.
Be sure to handle the machine carefully.
4. This instruction manual neither guarantees any license to industrial
property rights, etc., nor grants any license of such rights.
0608-001 AKZESO-P
AKZESO-P0608-001 1
Before Use
We are grateful to you for purchasing our products.
Before using this products, please read this instruction manual carefully to fully understand
the instructions and precautionary measures for safety purposes.
Always keep the instruction manual at hand.
1. The safety precautions are expressed, using the combinations of safety alert symbols
" " and headwords such as "DANGER", "WARNING", or "CAUTION" according to
the degree of danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols " " are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid any
possibility of injury or death.
This indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury. This signal
word is limited to the most extreme situations.
A precautionary item identified as " CAUTION" may also lead the operator to
reach a serious result. To avert a serious result, please respect the described
cautions.
This indicates a potentially hazardous situation which, if
not avoided, may result in property damages.
WARNING This indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
This indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
CAUTION
DANGER
CAUTION
AKZESO-P0608-001 2
2. Explained in this manual are only the items different from those in the instruction manual
of the main machine.
Use the instruction manual of the main machine together with this manual.
•Identifying Alert Icons
: This symbol mark represents danger or prompts warning.
: This symbol mark represents prohibited operations.
: This symbol mark represents forced operations or instructions.
•Identifying Icons in Manual
This icon shows an important precautionary or a regulatory item.
This icon shows the descriptions for correct operations of the machine.
This icon shows the items to be referred to.
This icon prompts the operator to follow the operational procedures.
Reference
Notice
Note
Contents
Page
3AKZESO-P
Before Use ............................................................................................... 1
Contents ................................................................................................... 3
1. Scope ................................................................................................ 4
1.1 Tape Feeder Installation Jig ........................................................ 4
1.2 Specifications ............................................................................. 5
1.3 Rough View ................................................................................ 6
2. Name and Function of Each Section ................................................ 7
3. Connection with Tape Feeder ........................................................... 8
3.1 Installation of Tape Feeder .......................................................... 9
3.2 Detachment of Tape Feeder ....................................................... 11
4. Troubleshooting ................................................................................ 12
4.1 Power Not Supplied to Tape Feeder ........................................... 12
5. Parts Location ................................................................................... 13
6. Electrical Circuit Diagrams ............................................................... 15
0608-001
4AKZESO-P0608-001
1. Scope
1. Scope
1.1 Tape Feeder Installation Jig
The tape feeder installation jig is a removal base and used to fasten a tape
feeder securely when the tape feeder without splicing is reloaded with
components.
By connecting the tape feeder and the main body of the machine (5588
series) with a cable (prepared for tape feeder connection), power can be
supplied to the tape feeder from the main body, making it possible to singly
load the feeder with components and adjust it.
5AKZESO-P
1.2 Specifications
Table 1
1.2 Specifications
0608-001
6AKZESO-P
1.3 Rough View
Unit: mm
Fig. 1
0608-001
1.3 Rough View
79.5
891
452
120
695
79.5
Tape Feeder Installation Jig
7AKZESO-P
2. Name and Function of Each Section
Fig. 2
[1] Tape Feeder Holding Guide
This guide can be used to securely hold a tape feeder when the feeder
must be adjusted singly.
[2] Tape feeder Fixation Base
A tape feeder can be put on this base.
[3] Tape Feeder Power Connector Socket
This is a DC power output connector for the tape feeder.
[4] Tape Feeder Cable
This cable is used to connect between the tape feeder power connec-
tor and the tape feeder for power supply.
[5] Drawer Connector Holder
This holder is used as both tape feeder cable hook and protector of
the drawer connector.
0608-001
2. Name and Function of Each Section
[1]
[2]
[3]
[5]
[4]
Tabla de contenidos
Otros manuales de Equipos industriales de Dover
Dover
Dover Triton 9610 Manual de usuario
Dover
Dover WILDEN PSG Equalizer SD Series Manual de instrucciones
Dover
Dover DESTACO ROBOHAND DLB Series Manual de usuario
Dover
Dover Destaco Robohand RPL Series Manual de usuario
Dover
Dover OPW DRYLOK 5770 Series Manual de instrucciones
Dover
Dover Civacon LM1051 Guía
Dover
Dover OPW 790 Series Manual de usuario
Dover
Dover Ravaglioli VSG J50HE Manual de usuario
Dover
Dover OPW 788 Series Manual de usuario
Dover
Dover MARATHON V-6030 HD Manual de usuario
Dover
Dover Vitronics Soltec DeltaWave 6622cc Manual de usuario
Dover
Dover HEIL LIBERTY TP1L-SM-0520 Manual de usuario
Dover
Dover TWG 250PR Instrucciones de funcionamiento
Dover
Dover UIC 5588 Series Manual de usuario
Dover
Dover DESTACO RFE Series Manual de usuario
Dover
Dover DESTACO ROBOHAND RPW Series Manual de usuario
Dover
Dover Triton 9600 Manual de usuario
Dover
Dover markem-image 9020 Manual de usuario
Dover
Dover TWG PullMaster PM50 Manual de usuario
Dover
Dover DESTACO ROBOHAND DPL Series Manual de usuario
