Dormakaba RTS Series Manual de usuario

RTS Series Package 26 (8812/Y)

Offset slide arm aluminum door and frame - pivots

Installation instructions

08279241 – 02-2020

| EN |

2RTS88 Closers 02-2020

08279241

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions Table of Contents

Table of contents

1 Installation instructions 3

1.1 Prepare frame and install closer 3

1.2 Prepare top of door 4

2 Adjustments 5

2.1 Adjust closing speeds 5

2.2 Optional 8511 applied stop (or stop by others) 5

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions

08279241 02-2020RTS88 Closers 3

Frame

Closer

. Prepare frame and install closer

1 Installation instructions

Fig.

1.1.1 Prepare header and side jamb according to

template.

1.1.2 Fasten mounting bracket to header with two

10-32 flat head machine screws.

1.1.3 Fasten two 1/4-20 flat head machine screws to

header with lock washers and nuts.

1.1.4 Fasten angle bracket to closer with two hex

head machine screws and flat washers.

1.1.5 Install 2 fillister head machine screws into

mounting tabs on closer; make approximately 3

turns.

1.1.6 Install closer into header by inserting

mounting tabs into mounting bracket.

1.1.7 Raise end of closer with angle bracket onto

the two 1/4-20 screws.

1.1.8 Fasten angle bracket with the two remaining

1/4-20 nuts and lock washers.

1.1.9 Tighten the 2 fillister head machine screws

securely.

1.1.10 Install cover plate by sliding tab into frame.

1.1.11 Fasten opposite end to mounting bracket with

two No. 8-32 flat head machine screws

provided.

105

Header

Side

jamb

Mounting

bracket

1/4-20 flat

head machine

screws

Angle bracket

Fillister head

machine

screws

Closer

Cover plate

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions

08279241 02-2020RTS88 Closers

Top of door

. Prepare top of door

Fig.

1.2.1 Prepare top of door according to template.

1.2.2 Assemble shock spring.

1.2.3 Slide assembled shock spring into track so end

with screw faces the 90° and 105° markings on

the track.

1.2.4 Align edge of shock spring assembly to coincide

with 90° or 105° deadstop in closer.

1.2.5 Secure shock spring assembly to track with

button head machine screw and 1/8” hex

wrench.

1.2.6 Insert slide block pin through slide block before

inserting slide block into track.

1.2.7 Fasten track to door with four No. 10-32 flat

head machine screws.

1.2.8 Slide arm onto spindle as shown, and tighten

the 1/4-20 socket head cap screw securely.

1.2.9 Position door at approximately 45° of opening.

1.2.10 Preload arm to a position where the hole in

arm aligns with slide block pin.

1.2.11 Thread slide block pin into arm wiht 3/16” hex

wrench.

1.2.12 TIGHTEN SECURELY!

105

Header

Side

jamb

Button

head

machine

screw

Shock spring

Closer

Cover plate

Track

Slide block pin

(not shown)

Slide block

No. 10-32 flat

head machine

screws

Arm

1/4-20

socket head

cap screw

Shock spring

Track

Applied stop

90° shock spring

setting shown

dormakaba RTS88 Package 26 (8812/Y) Installation Instructions

08279241 02-2020RTS88 Closers 5

Adjustments - closing speeds

8511 applied stop

2 Adjustments

2.1.1 Valve “A” - controls closing speed from

maximum opening angle to 0°.

• Clockwise - decreases closing speed

• Counter-clockwise - increases closing speed

2.1.2 Valve “B” - increased closing speed from

maximum openig angle to 20°.

Counter-clockwise - increases closing speed.

Valve “B”

“A”

“B”

Valve “A”

. Adjust closing speeds

Fig.

. Optional  applied stop (or stop by others)

Fig.

2.1.1 Prepare header according to template above. 2.1.2 Install applied stop as shown in Fig 2. with

three No.10-32 flat head machine screws.

1”

[25]

1”

[25]

1/8”

[3]

2”

[51]

Clearance

Front view

Bottom view

Cutout in stop

For 10-32 machine screws use No.21

drill and tap

One hole in cover plate

Two holes in frame

8511 applied stop

1-1/4”

[32] 7/8”

[22]

14-1/4”

[362]

1/2”

[13] 17-1/2”

[445]

35”

[889]

Side view

www.dormakaba.us

dormakaba

DORMA USA, Inc.

T: 800-523-8483

Otros manuales para RTS Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de apertura de puertas de Dormakaba

Dormakaba

Dormakaba RTS Series Manual de usuario

Dormakaba

Dormakaba 7400 SIS Manual de usuario

Dormakaba

Dormakaba ED50 Manual de usuario

Dormakaba

Dormakaba ED50 Manual de usuario

Dormakaba

Dormakaba ED50LE Manual de usuario

Dormakaba

Dormakaba ED900 Manual de usuario

Dormakaba

Dormakaba TS93 GSR PT Manual de usuario

Dormakaba

Dormakaba Best EHD9000 PT Manual de usuario

Dormakaba

Dormakaba 7400 FH Manual de usuario

Dormakaba

Dormakaba ED50 Manual de usuario

Dormakaba

Dormakaba 8900 FT Manual de usuario

Dormakaba

Dormakaba RTS88 Manual de usuario

Dormakaba

Dormakaba TENSOR Manual de usuario

Dormakaba

Dormakaba ED250 Manual de usuario

Dormakaba

Dormakaba 7400 PT Manual de usuario

Dormakaba

Dormakaba ES 200 Manual de usuario

Dormakaba

Dormakaba TS 98 XEA Manual de usuario

Dormakaba

Dormakaba G-EMF Series Manual de usuario

Dormakaba

Dormakaba 8600 IS Manual de usuario

Dormakaba

Dormakaba 8900 JT Manual de usuario

Dormakaba

Dormakaba ED100 Manual de usuario

Dormakaba

Dormakaba MUNDUS PREMIUM GK 40 Guía del usuario

Dormakaba

Dormakaba 8600 SIS Manual de usuario

Dormakaba

Dormakaba ITS9613 Manual de usuario

Manuales populares de Sistema de apertura de puertas de otras marcas

Pamex

Pamex KT-INP35 Manual de usuario

Label

Label NEPTIS/LE Manual de usuario

Cal-Royal

Cal-Royal N-F77CVR Manual de usuario

Scrigno

Scrigno OPEN1000 Manual de usuario

TriMark

TriMark UM 34 Manual de usuario

BFT

BFT WIND RMB 130B 200 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Besam

Besam Swingmaster MP Guía

CRL

CRL SENIOR PRIMA Manual de usuario

Assa Abloy

Assa Abloy SARGENT 1431 Series Manual de usuario

GAL

GAL MOVFR Hoja de especificaciones

Olide

Olide 120B Manual de usuario

Normstahl

Normstahl IDO7 Manual de usuario

Häfele

Häfele Finetta T 70 VF Manual de usuario

AGS

AGS D-PL Manual

Stanley

Stanley MA900ñ Instrucciones de instalación

WITTUR

WITTUR Hydra Plus UD300 Manual

Alutech

Alutech TR-3019-230E-ICU Instrucciones de instalación y funcionamiento