Dormakaba Best SL6000 SIS Manual de usuario

OVERVIEW

SL6000 SIS, SISJ, SISH, SISJH

Installation Instructions

Surface closer components

Spring stop arm for regular, top jamb mount

with hold open (SISH, SISJH)

Damper assembly

Main arm

Full cover (optional)

Pinion

Delayed action adjustment

6 10

Latch speed adjustment

Closer body

Closing/sweep speed adjustment

Backplate (optional)

Connecting arm

Backcheck positioning

Backcheck adjustment

Dust cap

Table of contents

1 Technical speciﬁcations 4

. Overview 

. Tools recommended 

. Handing the door 

. Surface closer components 

2 Installation - regular mount 5

. Installing the surface closer 

. Securing main arm to door/frame 

. Securing main arm to closer 

3 Instructions - top jamb mount 7

. Installing the surface closer 

. Securing main arm to door/frame 

. Securing main arm to closer 

4 Adjustments 9

. Adjust closing speeds: sweep, latch, backcheck,

delayed action 

. Adjust hold open (optional) 

. Adjust spring force 

5 Install cover (optional) 10

1 Technical speciﬁcations

. Overview

Caution: sex nuts are required for attachment

of components to unreinforced doors and to

wood or plastic faced composite type ﬁre doors,

unless an alternative method is identiﬁed in the

individual door manufacturer’s listings.

Maximum door opening degree is °.

Maximum -/” reveal on top jamb mounts for °

degree openings.

Know the swing of the door which is being

installed prior to installation.

Verify closer spring size prior to installation.

Make sure door efﬁciently operates prior to

installing closer.

Do not hammer arm onto spindle. Warranty

will be void.

Drill bits: # Phillips screwdriver

Metal: /"drill bit; /- tap /" or mm box wrench

Wood: /" bit "adjustable wrench

DPK: /" /" hex key

Sex nuts: /"  mm hex key

. Tools recommended

Table 

. Handing the door

Fig.

Hinge Hinge

Interior side of door

Left hand door (LH) Right hand door (RH)

. Installing the surface closer

2 Installation - regular mount

The surface closer is comprised of the following components.

. Damper assembly

. Main arm

. Full cover (optional)

. Pinion

. Delayed action adjustment

. Latch speed adjustment

. Closer body

. Closing/sweep speed adjustment

. Backplate (optional)

. Connecting arm

. Backcheck positioning

. Backcheck adjustment

. Dust cap

Fig.

. Surface closer components

NOTE: Orient pinion toward the hinge.

.. Secure closer body to mounting surface.

• Use four /"/# ﬂat head screws as required.

























Right hand

door shown

Closer

Pinion

toward

the hinge



Fig.

. Securing main arm to door/frame

Fig.

.. Secure adjusting tube to damper.

• Use one /” x/” torx head shoulder bolt provided.

.. Secure damper assembly to frame.

• Use two /” x ” ﬂat head screws

[#x” ﬂat head wood screws] provided.

.. Secure main arm to operator pinion.

.. Use provided pinion screw [Mxsocket head cap screw].

NOTE: To disassemble hold open plate:

.. Remove both screws from bottom of plate using a /”

hex key.

.. Keeping all washers in place, ﬂip plate over to orient as

per image above.

.. Re-secure plate with both screws.

. Securing main arm to closer

.. Slide end of connecting arm into end of damper

assembly.

.. Secure connecting arm and damper assembly.

.. Use provided fastener [/- x /” hex bolt].

Damper

Adjusting

tube

/"x/" torx

head shoulder

bolt

Pinion

screw

Hold open

Main/

connecting arm

assembly

Right hand

door shown

Damper

Damper/

Damper

assembly

Pinion

screw

Main/connecting

arm assembly

Adjusting

tube

Right hand

door shown

Left Hand (LH) Conﬁguration

Plate pointing to the LEFT

Right Hand (RH) Conﬁguration

Plate pointing to the RIGHT

Hold open

plate

Non-hold open

Door

Hinge Main arm

Damper

assembly

/- x /"

hex bolt

Connecting

arm

Right hand

door shown

Right hand

door shown

Do not hammer arm onto spindle.

Warranty will be void.

Fig.

. Installing the surface closer

3 Instructions - top jamb mount

NOTE: Orient pinion closest to hinge. .. Secure closer body to plate.

• Use four /"/# ﬂat head screws as required.

Pinion

toward

the hinge

Left hand

door shown

Fig.

. Securing main arm to door/frame

.. Secure adjusting tube to damper.

• Use one /” x /” torx head shoulder bolt provided.

.. Secure damper assembly to frame.

• Use two /” x ” ﬂat head screws

[# x ” ﬂat head wood screws] provided.

.. Secure main arm to operator pinion.

• Use provided pinion screw [Mx socket head cap screw].

NOTE: To disassemble hold open plate:

• Remove both screws from bottom of plate using a /”

hex key.

• Keeping all washers in place, ﬂip plate over to orient as

per image above.

• Re-secure plate with both screws.

. Securing main arm to closer

Fig.

.. Slide end of connecting arm into end of damper

assembly.

.. Secure connecting arm and bar/shoe assembly.

.. Use provided fastener [/- x /” hex bolt].

Damper

Adjusting

tube

7/8" x 1/2" torx

head shoulder

bolt

Left Hand (LH)

Configuration Plate

pointing to the LEFT

Right Hand (RH)

Configuration Plate

pointing to the RIGHT

Hold open

plate

Hold open

Bar/shoe

assembly

Pinion

screw Main/connecting

arm assembly

Damper/

Damper

assembly

Main/connecting

arm assembly

Pinion

screw

Adjusting

tube

Left hand

door shown

Non-hold open

/- x /"

hex bolt

Left hand

door shown

Hinge

Main arm

Bar/shoe

assembly

Connecting

arm

Left hand

door shown

Do not hammer arm onto spindle.

Warranty will be void.

Fig.

4 Adjustments

Conﬁrm closer spring size prior to making any closing speed

adjustments.

Do not back valve heads out beyond closer casting. Door should close in  to  seconds from º.

Maximum opening angle is º.

Do not close valves completely.

. Adjust closing speeds: sweep, latch, backcheck, delayed action

.. Adjust sweep speed for the area from °-°.

• Increase sweep speed: Turn valve counter-clockwise.

• Decrease sweep speed: Turn valve clockwise.

.. Adjust latch speed from °-°.

• Increase latch speed: Turn valve counter-clockwise.

• Decrease latch speed: Turn valve clockwise.

.. Adjust backcheck for the area from °-°.

• Increase resistance: Turn valve clockwise.

• Decrease resistance: Turn valve counter-clockwise.

.. Adjust Delayed Action for the are from °-°.

• Increase delay: Turn valve clockwise.

• Decrease delay: Turn valve counter-clockwise.

.. Enabling or disabling hold open.

• Twist hold open handle up or down to loosne or tighten,

respectively, the hold open capacity.

.. Engaging or disengaging hold open.

• Engaging hold open: Push door open until hold open ball connects

with detent in handle.

• Disengaging hold open: Pull door to pop hold open ball out of detent.

. Adjust hold open (optional)

Fig.

Sweep

Latch

7°

70°

75°

Sweep

Latch

Backcheck

Delayed

action

Backcheck

Delayed

action

°

Fig.

. Adjust spring force

5 Install cover (optional)

Fig.

.. Snap cover over closer body.

Optional cover Right hand

door shown

Dust cap

.. Screw dust cap onto exposed pinion.

Fig 

Regular and top jamb mount

Closer size Max door

weight (lbs)

Door width Full turns

Interior Exterior

SL

  ’” ---- -

  ’ ’” -

  ’” ’ 

  ’ ’” +

  ---- ’ +

Parallel mount

SL

  ’” ---- -

  ’ ’” 

  ’” ’ +

  ’ ’” +

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de apertura de puertas de Dormakaba

Dormakaba

Dormakaba HSW-R Manual de usuario

Dormakaba

Dormakaba 9000 Series Manual de usuario

Dormakaba

Dormakaba HSW EASY SAFE Manual de usuario

Dormakaba

Dormakaba RTS Series Manual de usuario

Dormakaba

Dormakaba TS 98 XEA Manual de usuario

Dormakaba

Dormakaba PT 22 Manual de usuario

Dormakaba

Dormakaba ED900 Manual de usuario

Dormakaba

Dormakaba UNIVERSAL Manual de usuario

Dormakaba

Dormakaba UNIVERSAL PT 29 Manual de usuario

Dormakaba

Dormakaba Muto Premium XL150 Manual del propietario

Dormakaba

Dormakaba TS 98 XEA Manual de usuario

Dormakaba

Dormakaba Muto Premium XL120 Manual de usuario

Dormakaba

Dormakaba 8900 PT Manual de usuario

Dormakaba

Dormakaba RTS88 Manual de usuario

Dormakaba

Dormakaba ED100 Manual de usuario

Dormakaba

Dormakaba G-SR/BG Series Manual de usuario

Dormakaba

Dormakaba Best EHD9000 PT Manual de usuario

Dormakaba

Dormakaba KTV Manual de instalación y operación

Dormakaba

Dormakaba G-SR EMR Series Manual

Dormakaba

Dormakaba 8600 FH Manual de usuario

Dormakaba

Dormakaba ED900 Guía

Dormakaba

Dormakaba ED900 Manual de usuario

Dormakaba

Dormakaba ED50LE Manual de usuario

Dormakaba

Dormakaba ED250 Manual de usuario

Manuales populares de Sistema de apertura de puertas de otras marcas

Pamex

Pamex KT-INP35 Manual de usuario

Label

Label NEPTIS/LE Manual de usuario

Cal-Royal

Cal-Royal N-F77CVR Manual de usuario

Scrigno

Scrigno OPEN1000 Manual de usuario

TriMark

TriMark UM 34 Manual de usuario

BFT

BFT WIND RMB 130B 200 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Besam

Besam Swingmaster MP Guía

CRL

CRL SENIOR PRIMA Manual de usuario

Assa Abloy

Assa Abloy SARGENT 1431 Series Manual de usuario

GAL

GAL MOVFR Hoja de especificaciones

Olide

Olide 120B Manual de usuario

Normstahl

Normstahl IDO7 Manual de usuario

Häfele

Häfele Finetta T 70 VF Manual de usuario

AGS

AGS D-PL Manual

Stanley

Stanley MA900ñ Instrucciones de instalación

WITTUR

WITTUR Hydra Plus UD300 Manual

Alutech

Alutech TR-3019-230E-ICU Instrucciones de instalación y funcionamiento