Dormakaba Grange Manual de usuario

The Grange

User‘s Guide

Programming door handing

The Grange is suitable for left hand or right hand opening doors. As a default, it is

set as a right hand. If you have a left hand opening door, please adjust the direction

of the door to correct the and icons.

a. Press the “M” button for 3 seconds

b. Press “9”

c. Press “16”

d. Motor will change direction to fit with the door direction

Repeating these steps will return the door to the original direction.

Getting started

Default Status

By factory default the Grange can be unlocked or locked pressing the

unlock or lock symbols on the screen or scanning any RFID card.

The Grange will remain in factory default mode until a user code

is created.

Indicators

This guide will assist in using the features and functions of the lock.

Please download the app dormakaba SmartLock from the app store or Google Play

or scan QR codes found on page 5.

Thank you for choosing The Grange by dormakaba

Operate successfully - buzzer long beeps

- green LED stays for 2 seconds

Operate unsuccessfully - buzzer beeps 2 times

- red LED flashes 2 times

Adjust Direction -(lock handing)

1 2 3

4 5 6

7 8 9

Note

• M button and D button are the 2 holes found on the inside

handle below the turn knob. D is at left, M is at right side.

• M button is for setting. D button is for deleting or resetting lock.

• Each operation should be done within 5 seconds, or it will exit

the setting.

D button M button

Delete all RFID cards

a. Press the “D” button for 3 seconds.

b. Press “2”. A beep is heard and green symbol is shown on the screen to confirm all

cards are deleted.

Delete all user codes:

a. Press the “D” button for 3 seconds.

b. Press “1”. A beep is heard and green symbol is shown on the screen to confirm all

user codes are deleted.

Managing Users (100, combination of cards, fobs or codes)

Add a new user with an access code:

a. Press the “M” button for 3 seconds. A beep is heard and a green symbol is shown

on the screen.

b. Press “1”. A beep is heard and green symbol is shown on the screen.

c. Input a 6-12 digit user code.

d. Press the lock icon. A beep is heard and green symbol is shown on the screen.

e. A second beep is heard and green symbol is shown on the screen to confirm user

code has been added.

USER

CODE

Add a new user with an RFID card:

a. Press the “M” button for 3 seconds. A beep is heard and green symbol is shown on

the screen.

b. Press “2”. A beep is heard and green symbol is shown on the screen

c. Swipe the card on the keypad. A beep is heard and green symbol is shown on the

screen.

d. A second beep is heard and green symbol is shown on the screen to confirm user

card has been added.

To add One Time Code:

a. Press the “M” button for 3 seconds. A beep is heard and green symbol is shown on

the screen.

b. Press “3”. A beep is heard and green symbol is shown on the screen.

c. Input a 6-12 digit OTC.

d. Press the lock icon. A beep is heard and green symbol is shown on the screen.

e. A second beep is heard and green symbol is shown on the screen to confirm user

code has been added.

To delete all One Time Code:

a. Press the “D” button for 3 seconds.

b. Press “3”. A beep is heard and green symbol is shown on the screen to confirm all

OTC are deleted.

One Time Code

This allows a user to unlock the door once. After the code is used, it cannot be reused.

This may be useful if you are expecting visitors or a delivery. The handle will take a maximum

of 10 codes at any one time.

You can find both one time and timed codes via the app, you can enter a maximum

10 of each.

Timed codes are very useful in the following scenarios:

B&B accommodation allowing guests access from 10am Friday to 10am Sunday.

Allowing your cleaner, trade person or visitors access on a certain day or time frame etc.

Auto Lock Timer

Use the Auto Lock Timer to lock the door after a specified amount of time.

a. Press the “M” button for 3 seconds. A beep is heard and green symbol is shown

on the screen.

b. Press “5”. A beep is heard and green symbol is shown on the screen.

c. Input the number of seconds that you want the door to remain unlocked for up

to 99 seconds.

d. Press the lock icon. A beep is heard and green symbol is shown on the screen.

USER

CODE

0-99

Download and Install the app

1. Enable your mobile to scan QR Code above to download app installation

package.

2. Enable the app and login after successfully downloading and installing.

Enable and Register the app

Enable the app and enter the login interface, then click “Change the Login Model”

and authenticate user by password, gesture or fingerprint, ensuring the Bluetooth

function in phone is turned on. You can enter device management automatically

after successful login.

iOS Apple Store Google Play

Cancel



Please enter password

Cancel

Click to unlock with fingerprint

Switch to Password Login Switch to Gesture Login Switch to Fingerprint Login

Using the dormakaba Smart Lock app

Bind Devices

1. Enter the device interface and click the binding icon “+” on the bottom;

2. On the device binding interface, click the code scanning icon ” “, Scan the Device

Number QR code which you will find on the back of the battery pack and enter

the mobile phone number and click “start binding”.

3. When the app sending request of binding and the lock prompts “In operation”,

press “M” button (right hand side) on the back lock body.

4. Choose the default name or input a new name, following the instruction

“Please name this device” and click “save” button to confirm.

Device Management

Refresh device information: Enter device management interface and press one

binding device until a selection menu pops up. Click “Refresh Device Information” to

synchronize the data in app and smart lock system.

Unbind the device: Enter device management interface and press one binding device

until a selection menu pops up. Click “Unbind the Device” and then click“OK” to delete

the device from the app device list.

Bind icon

Unlocking: enter management

Interface and click the unlocking

icon “ “.

The smart lock is unlocked.

Locking: enter management Interface,

and click the locking icon ” “.

The smart lock is successfully locked.

Note

• One app can be bound with maximum 10 devices.

D button

M button

View the Device Information

1. Click the binding device after bound with the smart lock successfully.

2. Enter the “Device Information” Interface, view and modify the smart lock

name and view the smart lock user list, capacity, binding list, current time,

power capacity, product model, firmware version number and device number

(scroll view on the device information interface).

Time synchronization: enter the “device information” interface, click “current time”

to synchronize smart lock and app time, and the function is only available to

administrator’s account.

Binding list: Enter the “Device Information” interface and click “Bind List” to

display the mobiles bound with the smart lock. Click the deleting icon “” on the

right of the user you want to delete and then click “OK” to confirm the operation.

Shake to unlock: Enter the “Device Information” interface and shake your mobile to

unlock.

Note

• Shaking to unlock can be enabled only when the mobile is connected with the

lock successfully and the distance between them must be within 10 meters.

• The first mobile successfully bound with the smart lock is the administrator.

Only the administrator has the right to synchronize the time and unbind other

devices on the bind list.

Bluetooth Key Sharing

1. Enter device management interface and press a binding device until a selection

menu pops up. Then click “Bluetooth Key Sharing”.

2. Choose the start date, time and valid period, and click “generates key”.

3. Click the sharing icon “ ”to share the new key to other users via email, WhatsApp,

SMS, WeChat, QQ, etc. The receiver can input the key to open the door.

Note

• Only the administrator is equipped with “Bluetooth Key Sharing” on the

management interface.

• When single valid term is selected, only 10 Bluetooth keys can be shared, 10+ keys

can be shared but the door cannot be opened.

• The shared keys are valid for use within 24 hours; if you select other time ranges,

the Bluetooth key sharing is not restricted.

View Message

1. Click “All Devices” after entering “Message” interface.

2. Select a device name, click “All Messages” to unfold options

including “All Messages”, “Open Messages”, “User Messages”,

“Operation Messages”and “Alarm Messages”. You can click “All

Times” to unfold operations including “All Times”, “Recent 1

day”, “Recent 7 days”, “Recent 15 days”, “Recent 30 days” and

“Custom time zones”.

3. Select the required message type or time zone to view.

Synchronize Message: In the “Message” interface, press a lock

icon until a dialogue box pops up on the bottom of the screen and

click “Synchronize” to keep the message on the app in line with the

smart lock system.

Note

• In the “Message” interface, press a lock icon until a dialogue box pops up on the

bottom of the screen to select “All” or delete some certain records.

• The Android users can operate the app following above instruction, operation

system is slightly different for IOS users. The mobile app shall prevail in actual

operation and menu.

Lock Management through Mobile

Note

• This flow chart only introduces how to manage locks through mobile.

The app shall prevail in the actual operation and menu.

After installing the app in your mobile successfully, enable your mobile

Bluetooth, login, bind your mobile with the lock and enter lock management:

Language Setting

1. Click “Settings” in your mobile and enter the “Language” interface and choose

the language you want.

2. Enable the app to find the device, message and setting interfaces has been

synchronized.

Unlock

Unbind

device

Lock

Refresh

information

Download

all records

Bluetooth

Key Sharing

View User

Message

Shake to

unlock

Device

Management

Message

Management

Interface

Settings

View Message

Device information

Hold on to the selected

lock name

Hold on to the selected

lock name

Hold on to the selected

lock name

Hold on to the selected

lock name

Click on the selected

lock name

Click on the selected

lock name

Refresh device information

Unbind device Click OK to confirm

Download

all

records

Share your

bluetooth key

Choose the start date,

time and valid period Generates Key

View or Change Device Name, User List, Capacity,

Current Time, Battery, Product Module, etc.

Shake the phone to unlock

Choose Message Type Including:“All Messages”, “Open Messages”,

“User Messages”, “Operation Messages”and “Alarm Messages”.

Choose Period Time: including “All Times”, “Recent 1 day”, “Recent 7

days”, “Recent 15 days”, “Recent 30 days” and “Custom Time Zone”.

Click “Login Settings”

Click “Autosync”

Click “Time Format”

Click “Message Hints”

Click “About Us”

Switch Login Model and Change

Records in app changes in

accordance with lock system

Choose the required format

In the app, the generated new

messages are hint in sound and

vibration, enable/disenable setting

Get the latest version

Always open mode

This stops the door from locking and puts it into passage mode.

Useful when gardening, bringing groceries in from the car etc.

After gaining access through the code or smart card, Press 1 and unlock

icon within 5 seconds to activate Always-Open mode. The door will now

remain unlocked.

The lock will flash green every 5 seconds to remind you the door is in the unlocked position.

To deactivate Always-Open mode, press the lock icon.

Code scrambling technology

When entering your access code, you can add numbers before and/or

after the code to disguise it from onlookers. A maximum of 20 numbers

can be entered – including the access code.

Factory Reset

Press the D button for 3 seconds, then press unlock icon 6 times.

Other features

If an incorrect code is entered 5 times, the lock will go into lockout

mode for 3 minutes.

The buzzer will beep 10 times and the red LED will flash 10 times.

When the battery is low, the system will indicate this each time the

door is opened by beeping 5 times and the LED will flash 5 times.

To change the batteries, undo screw at the bottom of internal handle

then pull battery case out. Requires 8x AA Alkaline batteries.

When the maximum of 100 access codes and/or cards have been

programmed, the buzzer will beep twice, and the red LED will stay on

for 10 seconds.

Trouble shooting

If the lock and unlock icons are reversed, see the information on page 2.

Please check the Grange Installation manual for more technical information.

Cleaning and maintenance

For general cleaning, regularly remove dust and dirt with a soft cloth. For

persistent marks use a soft damp cloth with a touch of water only and wipe

in the direction of the grain to prevent any cross scratching. Do not apply

household cleaners or bleaches and avoid hard rubbing and scrubbing.

Otros manuales para Grange

Tabla de contenidos

Otros manuales de Cerradura de puerta de Dormakaba

Dormakaba

Dormakaba SVA 4 Series Manual de capacitación

Dormakaba

Dormakaba 100 Manual de usuario

Dormakaba

Dormakaba Saffire LX Manual de usuario

Dormakaba

Dormakaba Saffire LX Manual de usuario

Dormakaba

Dormakaba E7900 Series Manual de usuario

Dormakaba

Dormakaba RCI 0162 Manual de usuario

Dormakaba

Dormakaba Saflok RT Manual de usuario

Dormakaba

Dormakaba BEST Switch Core Manual de usuario

Dormakaba

Dormakaba ED50LE Manual de usuario

Dormakaba

Dormakaba STUDIO Rondo Glass/Glass Manual de usuario

Dormakaba

Dormakaba LA GARD 700 Series Manual de usuario

Dormakaba

Dormakaba UNIQUIN Manual de usuario

Dormakaba

Dormakaba RD10 Manual de usuario

Dormakaba

Dormakaba STV 50 Series Manual de usuario

Dormakaba

Dormakaba PowerPlex 2000 Series Manual de usuario

Dormakaba

Dormakaba US 10 Manual de usuario

Dormakaba

Dormakaba 9000DE Series Manual de usuario

Dormakaba

Dormakaba Saffire LX-I Manual de usuario

Dormakaba

Dormakaba ML330 Manual de usuario

Dormakaba

Dormakaba Junior Manual de usuario

Dormakaba

Dormakaba 143 Series Manual de usuario

Dormakaba

Dormakaba Rose Manual de usuario

Dormakaba

Dormakaba 8300 Series Manual de usuario

Dormakaba

Dormakaba MUNDUS PREMIUM US 10 Guía del usuario

Manuales populares de Cerradura de puerta de otras marcas

Assa Abloy

Assa Abloy effeff 827A-IP Manual de usuario

We.lock

We.lock SECBNEBL51 Manual de usuario

Iseo

Iseo MA1A Manual de usuario

ID Lock

ID Lock 150 Manual de usuario

Lockly

Lockly ACCESS TOUCH PRO Manual de usuario

iLoq

iLoq G50S Manual de usuario

SDC

SDC Z7835 Manual de usuario

ilco

ilco 452 Manual de usuario

Samsung

Samsung shs-h705 Manual de usuario

TRU-BOLT

TRU-BOLT 08102017 Manual de usuario

CDVI

CDVI 500-LADJ Manual de usuario

Igloohome

Igloohome Deadbolt 2S Metal Grey Instrucciones de instalación y mantenimiento

eSSL

eSSL FL-300 Manual de usuario

JAKO

JAKO JKBTNX4 Manual de usuario

Dorma

Dorma MUNDUS PREMIUM GK 50 Guía del usuario

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manual de usuario

Yale

Yale MORTISE 8800 SERIES Manual de usuario

Siegenia

Siegenia KFV AS3500 Manual de usuario