Dorma TS93 T Manual de usuario

M5 HEX KEY

(REFERENCE UNIT CARTON LABEL FOR ACCESSORIES AND OPTIONS SUPPLIED)

TS93 T, TH

PULL SIDE TRACK MOUNT

Determine hand of door and unit type supplied,

(93T, 93PT). Prepare door and frame for fasteners

according to template 08279222.

LEFT HAND DOOR RIGHT HAND DOOR

Attach mounting plate to door, using lower four QTY

(4) WOOD

DOORS

METAL

DOORS

RIGHT HAND DOOR LEFT HAND DOOR

QTY

(4)

Attach closer to mounting plate. QTY

(4)

RIGHT HAND DOOR LEFT HAND DOOR

QTY

(1)

RIGHT HAND DOOR

Attach arm to pinion of closer, parallel to door.

holes in plate. Use upper four holes for optional

mounting. Arrows on plate face top of door.

MANUFACTURER'S LISTINGS.

ALTERNATIVE METHOD IS IDENTIFIED IN THE INDIVIDUAL DOOR

CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT OF

COMPONENTS TO UNREINFORCED DOORS AND TO WOOD

OR PLASTIC FACED COMPOSITE TYPE FIRE DOORS, UNLESS AN

LEFT HAND DOOR

INSPK NO. 08279220 Rev.03/08

www.dorma-usa.com 1-800-523-8483 03/08

PAGE

Description:

INS NO. Rev.

08279221 1 of 3

screw and tighten securely. Install track cover.

Attach arm to slide shoe.

Align hole in arm with slide shoe in track. Insert

QTY

(1)

M5 HEX KEY

(93T, 93TH)

QTY

(2) WOOD

FRAME

METAL

FRAME

L HINGES

(93TH UNITS ONLY)

SLIDE SHOE

track, and tighten screws.

(93T UNITS ONLY)

Insert slide shoe and track end blocks into

Assemble track and attach to frame.

end blocks into track. Tighten mounting

Insert slide shoe, hold open mechanism and track

IMPORTANT : L HINGE

NOTE: HOLD OPEN MECHANISM AND SLIDE SHOE MUST

BE INSTALLED WITH ARROWS POINTING AWAY

FROM THE DOOR HINGES. (ARROWS ARE

STAMPED ON SLIDE SHOE & HOLD OPEN

MECHANISM)

HOLD OPEN MECHANISM

Adjust sweep, latch, backcheck and delayed

action valves.

1 - SWEEP speed from

2 - LATCH speed from approx.

70° to 0°

7° to 0°.-(INCREASE ONLY)

DECREASE

INCREASE SWEEP

RANGE

LATCH RANGE

CAUTION: DO NOT REMOVE VALVES.

BACKCHECK RANGE

4 - DELAY speed from max opening 180° to 70°

CAUTION: DO NOT CLOSE VALVE COMPLETELY.

DECREASE

INCREASE

BACKCHECK (INTENSITY)

3 - BACKCHECK cushion effect.

142 3

(2)

QTY BRACKET

TRACK MOUNTING

bracket screws. Attach track assembly to frame.

Attach track assembly to frame.

TRACK END BLOCKS

DELAY

ACTION

RANGE

SLIDE

TRACK

END BLOCK

SHOE

SLIDE

TRACK

END BLOCK

SHOE

SHOCK BLOCK

L HINGES

SHOCK BLOCK

INS NO. PAGE Rev.

08279221 2 of 3 03/08

Install cover.

screw.

Secure with (1) 4-40 locking

TAB

COVER

cover onto plate.

END COVERS

end caps.

Slide end covers over closer body

REMOVE

Remove tab that aligns with arm hub. Slide

adjusted to meet barrier-free forces may not have sufficient

Take an opening force reading from

CAUTION: DO NOT OVERTIGHTEN

to meet the barrier-free requirement. Maximum number of

clockwise =12. Depending on opening conditions, a door

turns counter clockwise=5. Maximum number of turns

power to reliably close and latch the door.

ULC LABELED UNITS "ONLY"

NON-BARRIER-FREE OPENINGS:

Adjust according to chart.

Adjust spring tension, if required.

TS93-1 supplied with a size 2 spring setting.

CRITICAL

the pull on the door. If required, adjust the spring tension

REFERENCE LABEL ON CLOSER FOR MINIMUM/MAXIMUM SETTINGS

BARRIER-FREE OPENINGS -

+12

200 5

WEIGHT (LBS)

CLOSER

TS93-1

TYPE

100

150

125

DOOR

3'6"

2'6"

3'6"

MAX.

2'6"

---

SPRING

ADJUSTER

OF SPRING

SIZE

FULL TURNS

+12

SPRING ADJUSTER

FULL TURNS OF

INT.

DOOR WIDTH

EXT. CLOSER

SIZE

M5 HEX KEY

NOTE:

TS93-5 supplied with a size 6 spring setting.

NOTE:

Maximum number of turns clockwise = 6

TS93-1

SPRING ADJUSTER

FULL TURNS OF

4' 6"

TS93-5 DOOR WIDTH

EXT.

3' 6"

INT.

4' -4 6

CLOSER

SIZE

-4

200

250

TS93-5

INS NO. PAGE Rev.

08279221 3 of 3 03/08

9(HOLD OPEN UNITS ONLY) Set hold open.

To enable hold open,

into the hold open

mechanism.

To disable hold open,

pull the white slide away

from hold open mechanism.

M2.5 HEX KEY

To adjust hold open

force, turn clockwise to

counter clockwise to

weaken force.

increase force, and

M2.5 HEX KEY

Place the hold open

mechanism in desired

position. Tighten screws

#1 and #2 securely.

ONOFF

push the white slide

QTY

(1)

RIGHT HAND DOOR

LEFT HAND DOOR

Place wrench on bottom pinion and rotate pinion 5° as shown. With main arm

PINIONROTATE

5° CLOCKWISE

PINION PINION

parallel to door, place main arm onto top pinion. Fasten securely with pinion screw.

M5 HEX KEY

5° COUNTER-

CLOCKWISE

ROTATE PINION

www.dorma-usa.com 1-800-523-8483

ALTERNATIVE METHOD IS IDENTIFIED IN THE INDIVIDUAL DOOR

(REFERENCE UNIT CARTON LABEL FOR ACCESSORIES AND OPTIONS SUPPLIED)

TS93 PT, PTH

PUSH SIDE TRACK MOUNT

Determine hand of door and unit type supplied,

(93PT, 93PTH). Prepare door and frame for

fasteners according to template 08279212.

LEFT HAND DOOR RIGHT HAND DOOR

QTY

(4) WOOD

DOORS

METAL

DOORS

LEFT HAND DOOR RIGHT HAND DOOR

QTY

(4)

Attach closer to mounting plate.

LEFT HAND DOOR

QTY

(4)

RIGHT HAND DOOR

INSPK NO. 08279210 Rev.02/10

mounting. Arrows on plate face top of door.

holes in plate. Use upper four holes for optional

Attach mounting plate to door, using lower four

MANUFACTURER'S LISTINGS.

COMPONENTS TO UNREINFORCED DOORS AND TO WOOD

OR PLASTIC FACED COMPOSITE TYPE FIRE DOORS, UNLESS AN

CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT OF

PAGE

Description:

INS NO. Rev.

08279211 02/10

1 of 3

QTY

(1)

M5 HEX KEY

(93T, 93TH)

L HINGES

(93PTH UNITS ONLY)

(93PT UNITS ONLY)

Assemble track and attach to frame.

IMPORTANT :

L HINGE

NOTE: HOLD OPEN MECHANISM AND SLIDE SHOE MUST

BE INSTALLED WITH ARROWS POINTING AWAY

FROM THE DOOR HINGES. (ARROWS ARE

STAMPED ON SLIDE SHOE & HOLD OPEN

MECHANISM)

ANGLE

LEFT HAND DOOR BRACKET

(3)

QTY

(2) TRACK

METAL

FRAME

WOOD

BRACKET FRAME

Attach angle bracket to soffit. Insert slide shoe,

rubber stop, hold open mechanism and track

end blocks into track and tighten screws.

Attach track assembly to angle bracket by

attaching screws through end blocks to angle

bracket.

SLIDE SHOE

HOLD OPEN MECHANISM

ANGLE BRACKET

END BLOCK

1 - SWEEP speed from

3 - BACKCHECK cushion effect.

BACKCHECK (INTENSITY)

CAUTION: DO NOT CLOSE VALVE COMPLETELY.

4 - DELAY speed from max opening 180° to 70°

7° to 0°.-(INCREASE ONLY)

2 - LATCH speed from approx.

INCREASE

DECREASE

70° to 0°

BACKCHECK RANGE

CAUTION: DO NOT REMOVE VALVES.

INCREASE

DECREASE LATCH RANGE

RANGE

ACTION

DELAY

RANGE

SWEEP

Adjust sweep, latch, backcheck and delayed

action valves.

SHOCK BLOCK

QTY

(2) TRACK

BRACKET

Attach arm to slide shoe.

Align hole in arm with slide shoe in track. Insert screw and

tighten securely.

SLIDE

SHOE

TRACK END BLOCK

SHOCK

BLOCK

Attach angle bracket to soffit.

Insert slide shoe, rubber stop and end blocks

into track, and tighten screws.

Attach track assembly to angle bracket by

attaching screws through end blocks to angle

bracket.

7Install track cover by sliding it over track assembly.

Cover will snap into place when fully installed.

08279211 2 of 3 02/10

INS NO. PAGE Rev.

11 (HOLD OPEN UNITS ONLY) Set hold open.

To enable hold open,

into the hold open

mechanism.

To disable hold open,

pull the white slide away

from hold open mechanism.

M2.5 HEX KEY

To adjust hold open

force, turn clockwise to

counter clockwise to

weaken force.

increase force, and

M2.5 HEX KEY

Place the hold open mechanism in desired

position. Tighten screw securely.

ONOFF

push the white slide

adjusted to meet barrier-free forces may not have sufficient

Take an opening force reading from

CAUTION: DO NOT OVERTIGHTEN

to meet the barrier-free requirement. Maximum number of

clockwise =12. Depending on opening conditions, a door

turns counter clockwise=5. Maximum number of turns

power to reliably close and latch the door.

ULC LABELED UNITS "ONLY"

NON-BARRIER-FREE OPENINGS:

Adjust according to chart.

Adjust spring tension, if required.

TS93-1 supplied with a size 2 spring setting.

CRITICAL

the pull on the door. If required, adjust the spring tension

REFERENCE LABEL ON CLOSER FOR MINIMUM/MAXIMUM SETTINGS

BARRIER-FREE OPENINGS -

+12

200 5

WEIGHT (LBS)

CLOSER

TS93-1

TYPE

100

150

125

DOOR

3'6"

2'6"

3'6"

MAX.

2'6"

---

SPRING

ADJUSTER

OF SPRING

SIZE

FULL TURNS

+12

SPRING ADJUSTER

FULL TURNS OF

INT.

DOOR WIDTH

EXT. CLOSER

SIZE

M5 HEX KEY

NOTE:

TS93-5 supplied with a size 6 spring setting.

NOTE:

Maximum number of turns clockwise = 6

TS93-1

SPRING ADJUSTER

FULL TURNS OF

4' 6"

TS93-5 DOOR WIDTH

EXT.

3' 6"

INT.

4' -4 6

CLOSER

SIZE

-4

200

250

TS93-5

08279211 3 of 3 02/10

INS NO. PAGE Rev.

Install cover.

Remove tab that aligns with arm hub. Slide

REMOVE

Snap end covers to closer body

end caps.

END COVERS

cover onto plate.

COVER TAB

Secure with (1) 4-40 locking

screw.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de apertura de puertas de Dorma

Dorma

Dorma CD 80 Manual de usuario

Dorma

Dorma MUTO COMFORT M DORMOTION 50 Guía del usuario

Dorma

Dorma PORTEO Manual de instrucciones

Dorma

Dorma 8600 EMR Series Manual de usuario

Dorma

Dorma CS 80 MAGNEO Manual de usuario

Dorma

Dorma Compact Slide CS Manual de usuario

Dorma

Dorma ES 415 Manual de usuario

Dorma

Dorma UNIVERSAL Motion Manual de usuario

Dorma

Dorma ED400 Guía del usuario

Dorma

Dorma AS 350 Manual de usuario

Dorma

Dorma 8616 AFMJ Manual de usuario

Dorma

Dorma ES 68 Manual de usuario

Dorma

Dorma CS 80 MAGNEO Guía

Dorma

Dorma 7400 TDE Manual de usuario

Dorma

Dorma PT 51 Manual de usuario

Dorma

Dorma TS 93 Series Manual de usuario

Dorma

Dorma Manet Guía del usuario

Dorma

Dorma 8916 T Manual de usuario

Dorma

Dorma ED 200 Guía del usuario

Dorma

Dorma MUTO PREMIUM XL 80/150 SYNCHRO Manual de usuario

Dorma

Dorma 8916 FT Manual de usuario

Dorma

Dorma TS93 Series Manual de usuario

Dorma

Dorma CS 80 MAGNEO Manual de usuario

Dorma

Dorma TS 68 Manual de usuario

Manuales populares de Sistema de apertura de puertas de otras marcas

Pamex

Pamex KT-INP35 Manual de usuario

Label

Label NEPTIS/LE Manual de usuario

Cal-Royal

Cal-Royal N-F77CVR Manual de usuario

Scrigno

Scrigno OPEN1000 Manual de usuario

TriMark

TriMark UM 34 Manual de usuario

BFT

BFT WIND RMB 130B 200 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Besam

Besam Swingmaster MP Guía

CRL

CRL SENIOR PRIMA Manual de usuario

Assa Abloy

Assa Abloy SARGENT 1431 Series Manual de usuario

GAL

GAL MOVFR Hoja de especificaciones

Olide

Olide 120B Manual de usuario

Normstahl

Normstahl IDO7 Manual de usuario

Häfele

Häfele Finetta T 70 VF Manual de usuario

AGS

AGS D-PL Manual

Stanley

Stanley MA900ñ Instrucciones de instalación

WITTUR

WITTUR Hydra Plus UD300 Manual

Alutech

Alutech TR-3019-230E-ICU Instrucciones de instalación y funcionamiento