DoorKing 6400 Manual de usuario

DKS, DoorKing

6400 underground swing gate operator - installation guide

general information

safety instructions .....................................................04

entrapment protection ...............................................05

glossary ....................................................................06

speciﬁcations ................................................................. 07

underground operator installation

enclosure hole ............................................................... 08

gate mount..................................................................... 10

electrical installation

control box mounting ..................................................... 11

actuator wiring ............................................................... 12

main terminal wiring....................................................... 13

entrapment protection wiring ......................................... 15

exit/reverse loop detector wiring.................................... 16

shadow loop detector wiring .......................................... 17

settings

control board adjustment ............................................... 18

switch descriptions & functions...................................... 19

limit switch adjustment................................................... 20

reverse sensitivity adjustment ....................................... 21

soft/hard shutdown ........................................................ 22

technical information

maintenance schedule................................................... 23

troubleshooting .............................................................. 24

accessories.................................................................... 25

save this installation guide for reference

6400 Underground Swing Gate Operator,

Installation Guide

DKS DoorKing, Inc.

120 Glasgow, Avenue

Inglewood, Ca. 90301

310.645.0023

310.641.1586 fax

[email protected]

www.doorking.com

reserved.

Notice of Rights

The content in this manual is protected

under copyright law and no portion of

this manual may be copied, reproduced,

translated, or converted to any electronic

medium without prior written consent.

Notice of Liability

DoorKing, Inc. reserves the right to make

changes in the products described in this

manual without notice and/or obligation

to notify any persons of any revisions

or changes. DoorKing, Inc. makes no

representations or warranties with respect

to this manual.

publication number

6400-065-C-10-06

4 6400 installation guide

HAZARD ZONE

general information / safety instructions

Residents should be familiar

with proper use of gate, gate-

operator and possible hazards

associated with the gate system.

Eliminate or guard all exposed pinch points

and rollers.

Keep children away from gate controls.

Keep remote control away from children.

Security features should be installed to

avoid unauthorized use.

Controls must be installed away from the

gate (min. 10’ ft. away from gate) to avoid any

contact when operating the gate controls.

Keep adults, children and objects away from

the gate and HAZARD ZONES while in motion.

Speed limit through gate area is 5 MPH.

Install speed bumps and warning signs where

visible in the area of the gate. Failure to do so

may result in damage to the gate, gate-operator

and vehicle.

Gate operator is intended for installation on

gates used ONLY FOR VEHICULAR TRAFFIC.

Pedestrians must be provided with a separate

access and must stay out of the HAZARD

ZONE.

When removing the gate operator set to

the full open position and shut off power at the

service panel.

Vehicular gates should be constructed and

installed in accordance with ASTM F2200-

02, Standard Speciﬁcation for Automated

Vehicular Gate Construction. Contact ASTM at

610.832.9585 or www.astm.org.

Gates should be properly installed,

move freely and maintained following the

recommended service schedule. Contact your

service dealer for any maintenance or repairs.

User should be familiar with the following

functions:

Gate Operating System

Reversing Functions and Testing

Reversing Loops

Inherent Reversing System

Electric Edges

Photoelectric Cells

Related External Devices

Vehicular gate systems can produce high

levels of force; therefore it is important that you

are aware of possible hazards.

Pinch Points

Entrapment

 Absence of Controlled Pedestrian Access

Trafﬁc Backup

6400-065-C-10-06 6400 installation guide 5

COLUMM /

PILASTER

ENTRAPMENT

ZONE

general information / entrapment protection 1

This vehicular gate operator

is equipped with an inherent

adjustable current sensing system

(Type A). This system will sense

an obstruction in both the opening and closing

cycles causing the gate to reverse direction

should an obstruction be encountered. If the

system detects a second obstruction before

reaching the full open or close limit after the

initial reversal, an alarm will activate and the

operator will need to be reset before resuming

normal operation (see page. 21-22).

Test the gate operator monthly, the gate

MUST reverse or stop on contact when an object

activates the inherent sensing system. After

adjusting the force or the limit of travel, retest

the gate operator. Failure to adjust and retest

the gate operator properly can increase the

risk of injury or death. If any of these functions

operate improperly, remove the operator from

service immediately and contact your service

dealer.

Loops and loop detectors, photo-cells and

other devices must be installed with this gate

operator to prevent the gate from closing on

vehicular trafﬁc.

Sufﬁcient clearance should be available

between the gate and adjacent structures

when opening and closing to reduce the risk

of entrapment. Gates should not swing into

pedestrian access zones.

If entrapment zone is greater than 4” inches,

secondary entrapment protection is required.

If entrapment zone is less than 16” inches,

secondary entrapment protection is required.

If clearance between the gate and adjacent

structure is less than 16” inches, entrapment

protection is required, if clearance is more

than 16” inches, entrapment protection is not

required.

6400-065-C-10-06

6 6400 installation guide

1general information / glossary

GATE - A moving barrier such as a swinging, sliding, raising, lowering, or similar

barrier, that is a stand-alone passage barrier or a portion of a wall or fence system

that controls entrance and/or exit by persons or vehicles and completes the perimeter

of a deﬁned area.

RESIDENTIAL VEHICULAR GATE OPERATOR-CLASS I - A vehicular gate

operator (or system) intended for use in a home of one-to-four single family dwelling,

garage or parking area associated therewith.

COMMERCIAL / GENERAL ACCESS VEHICULAR GATE OPERATOR-CLASS II

-A vehicular gate operator (or system) intended for use in a commercial location or

building such as a multi-family housing unit (ﬁve or more single family units), hotels,

garages, retail store or other building servicing the general public.

INDUSTRIAL / LIMITED ACCESS VEHICULAR GATE OPERATOR-CLASS III -

A vehicular gate operator (or system) intended for use in an industrial location or

building such as a factory or loading dock area or other locations not intended to

service the general public.

RESTRICTED ACCESS VEHICULAR GATE OPERATOR-CLASS IV - A vehicular

gate operator (or system) intended for use in a guarded industrial location or building

such as an airport security area or other restricted access locations not servicing the

general public, were unauthorized access is prevented via supervision by security

personnel.

SYSTEM - In the context of these requirements, a system refers to a group of

interacting devices intended to perform a common function.

WIRED CONTROL - Acontrol implemented in a form of ﬁxed physical interconnections

between the control, associated devices and an operator to perform predetermined

functions in response to input signals.

WIRELESS CONTROL - A control implemented in means other than ﬁxed physical

interconnections (such as radio waves or infrared beams) between the control, the

associated devices and an operator to perform predetermined functions in response

to input signals.

INHERENT ENTRAPMENT SENSOR SYSTEM - An automatic sensor system that

senses entrapment of a solid object and is incorporated as a permanent and integral

part of the operator.

ENTRAPMENT - The condition when an object is caught or held in a position that

increases the risk of injury.

6400-065-C-10-06 6400 installation guide 7

Class of Operation:

Class I, Underground Residential Swing Gate

Actuator

Type of Gate:

Residential Swing Gates Only

Max Torque:

300Nm

Input Voltage / Operator Voltage:

24 VAC Single Phase Power Input (transformer

provided)

24 VDC

Current:

3 amps

Max Gate Length:

10 Ft.

Max Gate Weight:

750Lb.

Cycles / Hr:

20/Hr with AC Power Transformer Connected

Speed:

90° in approximately 20 seconds

Entrapment Protection:

Primary - Inherent adjustable current sensor (Type A)

Secondary - Provision for connection of non-contact

(Type B1) sensors.

Operator

Cover Plate

Gate Support Bracket

Cover Plate Hinges

general information / speciﬁcations 1

Foundation Box

Pinion

Release Arm

Limit Switch Plate

Crank Connecting Assembly

Locking Bracket

Conduit Hole

Drain Pipe Hole

Lubrication Slot

6400-065-C-10-06

8 6400 installation guide

2underground operator installation / enclosure hole

BEFORE INSTALLING THE GATE OPERATOR

Review the operator speciﬁcations on page 7.

Review the operator installation dimensions.

Operator and gate should be installed in conjunction to ensure proper alignment

when opening.

Gate should be mounted on heavy-duty ball bearing hinges.

Gate MUST swing freely without binding.

 Never attempt to manually operate any gate until the power has been shut-off

unless otherwise speciﬁed.

17.6

6.25

12.6

Dig a hole for the enclosure box

using the gate hinge as a center line,

see illustration for dimensions.

Remove components from

the foundation box before

setting in to place.

NOTE: Dimensions

may differ slightly

when ﬁtting in the

enclosure.

Gate Hinge

NOTE: Depending on soil

conditions a concrete base

may need to be applied to

avoid run-off.

6400-065-C-10-06 6400 installation guide 9

Install electrical and drainage PVC conduits:

 Run ectrical conduit from the foundation box to the

control/junction box.

 Run drainage conduit from the foundation box to the

nearest drain.

underground operator installation / enclosure hole

Place the enclosure box inside the

hole ensuring it is leveled and the gate

hinge is centered with the operator

pivot.

Pour concrete around the

enclosure box to set in place:

 Cover exposed holes

avoiding any concrete to

seep inside the enclosure

box.

 Conﬁrm the operator pivot

and door hinge are centered

and conduits are in position.

NOTE: Concrete base

should be fully cured

before setting the

foundation box.

Gate Hinge

Centered With

Operator Pivot.

Operator Pivot

Drainage Conduit

Electrical Conduit

Pour Concrete

Around the

Edge of the

Foundation

Box.

NOTE: Concrete should

be fully cured before

installing motor.

NOTE: Improper drainage will

result in stagnant water leading to

component failure.

6400-065-C-10-06

10 6400 installation guide

2underground operator installation / gate mount

Reinstall the motor assembly.

Pivot and

Bearing

NOTE: Locking bracket

and gate support should

be in place at 90 degrees.

Weld the gate U-Channel onto the

gate support bracket.

 Weld on both sides.

 Cover the components avoiding

weld scale damage.

Install the crank connecting assembly.

 Gate MUST be closed or at the 90

degree position when installing the

crank connecting assembly.

Install the gate on to the hinge and the

U-Channel.

 Gate should swing freely 90

degrees.

Crank Connecting

Assembly

Grease the pivot, and bearing

and set components in place

(see illustration for assembly

installation).

DoorKing does not

provide the U-CHANNEL,

it must be fabricated

according to existing

gate dimensions.

Otros manuales para 6400

Tabla de contenidos

Otros manuales de Abridor de puerta de DoorKing

DoorKing

DoorKing 9150 Series Instrucciones de funcionamiento

DoorKing

DoorKing 9000-080 Instrucciones de funcionamiento

DoorKing

DoorKing 1601-235 Manual de usuario

DoorKing

DoorKing 9000 Series Manual de usuario

DoorKing

DoorKing 6400 Manual de usuario

DoorKing

DoorKing 6400 Manual de usuario

DoorKing

DoorKing 1602-162 Manual de usuario

DoorKing

DoorKing 6050-080 Instrucciones de instalación

DoorKing

DoorKing 4302 Manual de usuario

DoorKing

DoorKing 6003 Manual de usuario

DoorKing

DoorKing 9150 Series Instrucciones de funcionamiento

DoorKing

DoorKing 1175 Instrucciones de funcionamiento

DoorKing

DoorKing 9150 Series Manual de usuario

DoorKing

DoorKing 1601-295 Manual de usuario

DoorKing

DoorKing Series 9500 Instrucciones de funcionamiento

DoorKing

DoorKing 1603 Instrucciones de funcionamiento

DoorKing

DoorKing 1175 Guía de instalación

DoorKing

DoorKing 9150-084 Instrucciones de funcionamiento

DoorKing

DoorKing 9245 Manual de usuario

DoorKing

DoorKing 6006 Manual de usuario

DoorKing

DoorKing 6004 Manual de usuario

DoorKing

DoorKing 9100 Manual de usuario

DoorKing

DoorKing 9245 Instrucciones de funcionamiento

DoorKing

DoorKing 6555 Instrucciones de funcionamiento

Manuales populares de Abridor de puerta de otras marcas

Elite

Elite CSW200UL Manual de usuario

CAME

CAME FROG-PM4 Manual de usuario

SOMFY

SOMFY FX230 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Manual de usuario

Turnstiles

Turnstiles FSW 900 Manual de usuario

Erreka

Erreka BUL BL33 Instrucciones de funcionamiento

Erreka

Erreka VULCAN S Manual de usuario

Beninca

Beninca R1-2 WBV Manual de usuario

Erreka

Erreka VULCAN D Manual de usuario

Motorline professional

Motorline professional FORT Manual de instrucciones

Beninca

Beninca BOB5024 Manual de usuario

AGA

AGA GATEMASTER 900 HD Manual de usuario

Chamberlain

Chamberlain MotorLift HC280ML Manual de usuario

SOMFY

SOMFY Dexxo RTS Pro Manual de usuario

Cardin

Cardin BL Series Manual de usuario

Westfalia

Westfalia 85 27 06 Manual de usuario

CAME

CAME F500 Manual de usuario

Extel

Extel VERA Manual de usuario