Donner DED-200 Manual de usuario
www.idonner.com
www.donnerdeal.com
INSTRUCTION MANUAL
5drum4cymbals
FUNCTION INTRODUCTION
● Six layers of force are adopted to make it closer to the original drum playing.
● Supports double triggers with edge-hit response.
● Fifteen sets of drum group and one sets of custom drum group.
● Number of timbres 225 and GM standard timbre library. (song use)
● Thirty songs, adjustable GM volume and drum volume .(for learning)
● Effect: reverberation type 0-5, two-band EQ equalization.
● Supporting adjustment of sensitivity parameters of drum discs.
● Speed control: 30-250 beats/minute.
● Metronome: 9 kinds.
● Other functions: customize settings, store and restore factory settings.
● Interpoles: USB MIDI, headphones, audio input, audio output, adding cymbal socket.
1MY ELECTRONIC DRUM
Dear Customer,
Thank you for ordering from Donner! This is Donner Customer Service Team.
After received the package, please test and see if there's any problem.
Any problem please feel free to contact us by amazon (the order page) or the
email address below.
Thank you again for choosing Donner!Please enjoy making your own music.
Best regards
Donner Customer Service Team.
Gmail：donnerdeal@gmail.com
Website：https://www.donnerdeal.com/
Welcome to Donner
CATALOG
2
MY ELECTRONIC DRUM
FUNCTION INTRODUCTION ----------------------------------------------------------------
CATALOG -------------------------------------------------------------------------------------
INSTALLATION GUIDE -----------------------------------------------------------------------
Check the attached items -------------------------------------------------------------------------------
Kick drum installation -----------------------------------------------------------------------------------
Install hammer stick -------------------------------------------------------------------------------------
Kick drum and pedal fixation ---------------------------------------------------------------------------
Installation module bracket -----------------------------------------------------------------------------
Drum stand-----------------------------------------------------------------------------------------------
Drum stand installation----------------------------------------------------------------------------------
Installation of support rod and module box ------------------------------------------------------------
Installation of strike components -----------------------------------------------------------------------
Insert Connection Line ----------------------------------------------------------------------------------
DIAGRAM OF MODULE BOX SOCKET ------------------------------------------------------
POWER TERMINAL CONNECTION ---------------------------------------------------------------------
USB MIDI PORT -----------------------------------------------------------------------------------------
EARPHONE PORT ---------------------------------------------------------------------------------------
AUDIO OUTPUT PORT ----------------------------------------------------------------------------------
AUDIO INPUT PORT ------------------------------------------------------------------------------------
ADDING CYMBAL SOCKET -----------------------------------------------------------------------------
OPERATION GUIDE --------------------------------------------------------------------------
POWER ON ---------------------------------------------------------------------------------------------
MASTER VOLUME --------------------------------------------------------------------------------------
TIMBRE SELECTION OF DRUM GROUP ---------------------------------------------------------------
PLAY THE DRUM ---------------------------------------------------------------------------------------
METRONOME ------------------------------------------------------------------------------------------
DEMONSTRATION MUSIC PLAYING ------------------------------------------------------------------
PLAY SPEED --------------------------------------------------------------------------------------------
DRUM DISC SENSITIVITY ADJUSTMENT --------------------------------------------------------------
REVERBERATION/EQUILIBRIUM OPTIMIZATION -----------------------------------------------------
FACTORY RESET ----------------------------------------------------------------------------------------
APPENDIX -----------------------------------------------------------------------------------
Timbre --------------------------------------------------------------------------------------------------
Drum combination timbre -----------------------------------------------------------------------------
Demonstration music ----------------------------------------------------------------------------------
User drum group ---------------------------------------------------------------------------------------
PRODUCT MAINTENANCE -----------------------------------------------------------------
SAFETY PRECAUTIONS ---------------------------------------------------------------------
WARRANTY CARD --------------------------------------------------------------------------
1
2
3
3
4
4
4
4
5
5
6
7
8
9
9
9
9
9
9
9
10
10
10
11
11
12
12
13
13
13
13
14
14
14
14
14
15
16
19
REMARK！
● Please follow the instructions and read the "safety precautions" in the User Manual carefully
before using it.
● When you have completed the connection, please turn on the power according to the instructions
in the User's Manual and check whether you can hear the sound.
● This product needs adult to install, do not let the minor install it independently.
INSTALLATION GUIDE
3MY ELECTRONIC DRUM
01
Check the attached items
Sound module Module bracket Hi hat Ride
Tom-tom
(3pcs)
Snare Cymbal mounts
（3pcs）
Drum mount
（4pcs）
KickFixed partsSupporting parts Fastening screw Kick pedalStick hammer
Hi hat pedal
Signal Connection Linedrum stick power adapter Drum keyBolt driver Inner six angle
● After opening the package, please check whether it contains all the items immediately.
If there are any omissions, please contact your dealer.
Crash（2pcs） Crash2 line
2pcs 2pcs 2pcs4pcs
Hi hat mount
INSTALLATION GUIDE
4
MY ELECTRONIC DRUM
Push the sound bracket in the
right direction to jam the
sound sodule box
02
Kick drum installation
● During installation, tighten the screws and be careful not to pinch your finger!
Use screwdriver to lock the kick drum, fixing
parts and supporting parts with 6 small screws
according to the figure.
Then insert two springs into two anti-skid screws,
lock in the bottom of the support until it is against
the ground.
05
Installation module bracket
03
Install hammer stick
● Tighten the screw to avoid
loosening.
04
Kick drum and pedal fixation
● Bottom drum and pedal should be fixed and
tightened to avoid falling off.
The top two are pointed screw
Insert the hammer rod into
the round hole according to
the figure, rotate the wool
hammer head to align it with
the drum face, and tighten
it with the drum key.
Insert the fixed iron bar into the hole
position according to the figure.
The protruding edge of
the bottom drum is
inserted into the pedal
fixing clamp and the
screw is tightened.
5MY ELECTRONIC DRUM
INSTALLATION GUIDE
06
Drum stand
07
Drum stand installation
● During installation, tighten the screws and be careful not to pinch your finger!
● Assemble the drum stand according to the direction indicated.
● After opening the package, please check whether it contains all the items immediately.
If there are any omissions, please contact your dealer.
2pcs
A
L=450mm 2pcs
B
L=550mm
C D
E F
L=350mm
H
INSTALLATION GUIDE
Insert three cymbal support rods, four
drum support rods and module boxes
into corresponding positions respectively,
and tighten the plastic head screw.
1.2 meters
For safety considerations, the expansion width of the bracket should not be greater than 1.2 meters.
08
Installation of support rod and module box
● Support rods and module boxes need to be inserted in place, and tighten the plastic head
screw to avoid falling.
6
MY ELECTRONIC DRUM
Install cymbals, Tom drums and army drums in corresponding positions according
to the figures.
Attention: Each cymbal, Tom drum and army drum has different functions. It needs
to be installed correctly with reference to the identification of accessories.
INSTALLATION GUIDE
09
Installation of strike components
● After inserting the drum disc, tighten the screw to avoid loosening.
● Do not screw the cymbals tightly, leave some space for them to sway up and down.
hi-hat
crash ride
tom1 tom2
tom3
snare
7MY ELECTRONIC DRUM
crash
8
MY ELECTRONIC DRUM
Plug the parallel plug into the
host box according to the figure,
then insert the corresponding
hole position of the hitting part
follow the English label of the
head of the connecting line.
INSTALLATION GUIDE
10
Insert Connection Line
● Please insert the connecting wire in place to avoid bad contact and insert it correctly
follow the diagram.
hi-hat
crash ride
tom1
module box
tom2
snare
Kick drum
hi-hat pedal
tom3
crash
DC9V 1A USB
PHONE
DC9V 1A USB
PHONE
AUDIO IN
AUDIO OUT
MANU
MP3
SONG
CRASH 2（Add cymbals)
5
21 6
4
3
REMARK！
● To prevent damage to the equipment, make sure to turn down the volume and shut down all the
equipment before making any connection.
● Additional cymbals, speakers, headphones and peripherals are all purchased separately. They are
not in standard configuration.
1. When in use, connect the power terminal according to the diagram, insert the power outlet of the
module box at one end and 100-240V household power outlet at the other end. (Fig. 1)
2.
If you do not use this product for a long time, please pull out the power plug and keep it properly.
1POWER TERMINAL CONNECTION
Connecting headphones monitors the details of percussion and does not disturb others when
playing without connecting speakers. (Fig. 3)
3EARPHONE PORT
Audio output port can be connected with active speaker (special electronic drum speaker) and large
audio equipment. (Fig. 4)
4AUDIO OUTPUT PORT
Audio input port can connect the sound source playback device to the module box for playback
(such as MP3. mobile phone and other audio signal input). (Fig. 5)
5AUDIO INPUT PORT
This socket can add a cymbal to facilitate expansion. (Fig. 6)
6ADDING CRASH
The use of electronic drum MIDI USB interface can interact with music devices with MIDI.
1. Through the pre-installed Music software on computers and mobile phones, we can learn to play,
compose music, store and other functions. (Fig. 2)
2. When connected to a computer or mobile phone, the audio output of the device needs to be
connected to the audio input socket of the module box in order to synchronize the sound effects
on the device. (Fig. 5)
2USB MIDI PORT
DIAGRAM OF MODULE BOX SOCKET
9MY ELECTRONIC DRUM
Tabla de contenidos
Otros manuales de Tambor de Donner
