Dometic 8000 Series Manual de usuario

SANITATION

TOILETS

8100/8500/8600/8700/8900

EN 8000 Series

Operation Manual................ 1

FR Série 8000

Manuel d’utilisation.............. 13

Toilets

NORTH AMERICAN ADDRESS INFORMATION

U.S.A. & CANADA

Service Oﬃce

Dometic Corporation

13128 St. Rte. 226

Big Prairie, OH 44611

Service Center & Dealer

Locations

Refer to “7 Customer Service” on

page 11.

Read these instructions carefully. These instructions MUST stay with this product.

CONTENTS

1 Explanation of symbols and safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Intended use ............................................................ 4

3 Operation............................................................... 5

4 Maintenance ............................................................ 8

5 Troubleshooting..........................................................10

6 Disposal ................................................................11

7 Customer Service.........................................................11

8 Limited warranty..........................................................11

3EN

Toilets

1 EXPLANATION OF SYMBOLS AND SAFETY INSTRUCTIONS

This manual has safety information and instructions to help you eliminate or reduce the risk of

accidents and injuries.

1.1 Recognize safety information

This is the safety alert symbol. It is used to alert you to potential physical injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

1.2 Understand signal words

A signal word will identify safety messages and property damage messages, and will indicate the

degree or level of hazard seriousness.

indicates a hazardous situation that, if not avoided, could result in death or

serious injury.

indicates a hazardous situation that, if not avoided, could result in minor or

moderate injury.

is used to address practices not related to physical injury.

Iindicates additional information that is not related to physical injury.

1.3 Supplemental directives

Read and follow all safety information and instructions to avoid possible injury or death.

Read and understand these instructions before use and maintenance of this product.

Incorrect operation and maintenance of this product can lead to serious injury.

The installation must comply with all applicable local or national codes, including the

latest edition of the following standards:

U.S.A.

• ANSI/NFPA70, National Electrical Code

(NEC)

• ANSI/NFPA 1192, Recreational Vehicles

Code

• ABYC guidelines for marine installations

Canada

• CSA C22.1, Parts l & ll, Canadian Electrical

Code

• CSA Z240 RV Series, Recreational

Vehicles

1.4 General safety messages

Failure to obey the following warnings could result in property damage, serious

injury, or death:

• This product must be installed and serviced by a qualiﬁed service technician.

• Do not modify this product in any way. Modiﬁcation can be extremely hazardous.

• Before beginning work on this product, be sure that all electrical power to the unit has been

turned oﬀ and that seacocks are in the closed or oﬀ position.

• FLOOD HAZARD:

• For toilets connected to any through-the-hull ﬁttings: always close seacocks when the

toilet is not in use (even if boat is unattended for a brief period).

• Instruct all passengers on how to close valves when the toilet is not in use.

• For toilets using fresh water for ﬂushing, disconnect any shoreside water connections

when the boat is unattended for any length of time.

Toilets

RISK OF PROPERTY DAMAGE. Failure to comply may cause damage to the toilet

or toilet system.

• Only ﬂush water, bodily wastes, and rapid-dissolving toilet tissue.

• Do not overﬁll the holding tank, or serious damage can occur to the sanitation system.

Overﬁlling the holding tank can rupture the holding tank or release tank contents into

the bilge.

2 INTENDED USE

The 8000 Series toilets are designed and intended for use only inside a boat or recreational

vehicle (hereinaer referred to as “RV”) for which it is supplied. Use the instructions to ensure

correct operation of the toilet. Dometic accepts no liability for damage in the following cases:

• Faulty assembly or connection.

• Damage to the product resulting from mechanical inﬂuences and excess voltage.

• Alterations to the product without expressed permission from the Dometic Corporation.

• Use for purposes other than those described in the operating manual.

Dometic Corporation reserves the right to modify appearances and speciﬁcations without notice.

IRV installation is available for certain models only. Refer to the toilet installation manual for

information on the applicable models.

5EN

Toilets

3 OPERATION

3.1 Using the ﬂush touchpad or ﬂush switches

OK TO

FLUSH

DO NOT

FLUSH

1Dometic Flush Switch (DFS) 2Dometic Flush Toggle Switch (DFST)

3Dometic Flush Touchpad (DFT) 4Dometic Flush Touch Panel (DFSHW)

➤Press and hold the Add Water switch to reach the desired water level.

➤Press the Flush switch, then release it.

I8100 models only: Press and hold the Flush switch until the bowl is clear. Press and

hold the Dry Bowl switch to ﬂush the toilet without adding water during or aer a ﬂush.

3.2 Using the ﬂush handle (8700 models only)

Flush Handle

➤Li the ﬂush handle to ﬁll the bowl to the

desired water level.

Flush Handle

➤Press the ﬂush handle down, then release it

to ﬂush the toilet.

Toilets

3.3 Understanding the indicator lights for 8500, 8600, 8700, and 8900

Indicator Light Status

Power on Steady green Electrical power to the toilet is

activated

Flashing green Flush mode is changing

Tank level Amber The holding tank is 75% full

Red The holding tank is 100% full*

*Flush actuation is disabled to prevent overﬁlling the holding tank

3.4 Changing the ﬂush modes for 8500 8600, 8700, and 8900

Flush modes Action Gallons per ﬂush

Normal Adds water to the bowl aer

every ﬂush

0.85 gal (3200 ml)

Dry bowl Does not add water to the

bowl aer every ﬂush

0.45 gal (1700 ml)

➤To change modes, press the Flush switch or handle until the power-on light begins ﬂashing

(about ﬁve seconds).

➤Release the Flush switch or handle.

3.5 Toilet operation when connected to “full tank” shut-down relay and

tank monitor system (8100 models only)

When a macerator toilet system uses a “full tank” shut-down relay, ﬂush capability is shut oﬀ when

the holding tank level reaches the “full” mark.

➤Empty the holding tank to restore ﬂush capability.

3.6 Initializing the toilet system

➤Turn on the water supply and electrical power to the toilet.

➤Press the Flush switch or handle once.

I8100 models only:

➤Press the Flush switch or handle and hold it for at least ﬁve seconds.

➤Toss several sheets of toilet tissue into the bowl and ﬂush the toilet again.

IIf the toilet does not function as expected, refer to “5 Troubleshooting” on page 10

for possible solutions.

7EN

Toilets

3.7 Using the bidet (8900 models only)

FLOODING HAZARD: Shut the bidet faucet oﬀ completely aer use. Failure to

do so could result in property damage, serious injury, or death.

Handle

➤Turn the handle away from the toilet to

activate the bidet faucet.

Handle

➤Adjust the water temperature by turning

the handle up for warm water, and down

for cool water.

➤Use the electronic ﬂush switch to clear

the toilet bowl during and aer using the

bidet.

3.8 Using the bidet (8500 models only)

FLOODING HAZARD: Shut the bidet faucet oﬀ completely aer use. Failure to

do so could result in property damage, serious injury, or death.

Handle

➤Turn the handle toward the front of the

toilet to activate the Wash function.

Handle

➤Turn the handle toward the back of the

toilet to activate the Bidet function.

Toilets

4 MAINTENANCE

RISK OF PROPERTY DAMAGE: Do not use abrasive cleaners, caustic chemicals,

or lubricants and cleaners that contain alcohols or petroleum distillates. These substances may

cause damage to the toilet’s internal seals.

4.1 Cleaning the toilet

➤Use non-abrasive cleaners to maintain the original appearance of the toilet.

4.2 Setting an inspection schedule

Inspection schedule Inspection task

Monthly Inspect the toilet, plumbing, plumbing connections, wiring,

and wiring connections.

Open and close all of the plumbing valves, including the

seacocks.

Check the inline water ﬁlters and the vented loops for

blockages.

Yearly Check the water valve ﬁlter.

4.3 Preparing the toilet for an extended period of non-use

➤Flush the toilet in normal mode.

➤Add 4 oz (120 ml) of liquid biodegradable laundry detergent. The laundry detergent should

not contain bleach or other environmentally harmful substances.

IIf sea water is used for ﬂushing:

➤Turn oﬀ the power to the sea water pump.

➤Pour fresh water directly into the bowl during the ﬂush cycle.

➤Flush the toilet ﬁve times to clear the bowl.

➤Turn oﬀ the water supply to the toilet.

➤Flush the toilet without water four times to clear the remaining water from the system.

➤Turn oﬀ the power to the toilet.

➤Completely pump out the holding tank.

➤If the system will be subjected to freezing temperatures, follow the above procedure, then

proceed to “4.4 Winterizing the toilet” on page 9.

➤If the boat or RV will not be used for an extended period of time, or in the event of a long

electrical power interruption, shut oﬀ electrical power and water supply to the toilet.

9EN

Toilets

4.4 Winterizing the toilet

RISK OF POISONING: Do not use an automotive-type antifreeze in fresh-water

systems. Failure to comply could result in property damage, serious injury, or death.

IThe amount of antifreeze needed may vary, depending on the installation.

For pressurized fresh water systems

➤Thoroughly ﬂush the toilet system with fresh water.

➤Drain the potable water tank.

➤Empty the holding tank.

➤Flush potable-water antifreeze and water mixture through the toilet and into the entire

plumbing system. Each installation is diﬀerent, so amounts may vary. User discretion is

required to assure adequate protection.

➤Turn oﬀ the power to the toilet.

➤Empty the holding tank of any remaining contents.

For raw water systems

➤Close the “intake” and “discharge” seacocks.

➤Turn oﬀ the power to the toilet.

➤Disconnect and drain the discharge hose, intake hose, and the inline ﬁlters.

➤Connect a 3' (914 mm) hose to the raw-water pump intake.

➤Connect a 3' (914 mm), 1.5" (38 mm) ID hose to the toilet discharge.

➤Place the other end of the hose from the raw water pump intake into a bucket containing

antifreeze.

➤Place the other end of the hose from the toilet discharge into an empty bucket.

➤Turn on the power to the toilet.

➤Flush the toilet until the antifreeze is removed from the bowl.

➤Turn oﬀ the power to the toilet.

➤Reconnect the intake and discharge hoses to the toilet.

Toilets

5 TROUBLESHOOTING

Fault Possible cause Suggested remedy

The ﬂush function works, but

the water in the bowl empties

slowly or not at all.

The discharge pipe is pinched

or kinked.

Straighten the discharge pipe

to remove the pinch or kink.

The discharge head is

too high.

Reroute the discharge pipe.

The macerator pump or the

discharge pipe is blocked.

Close the seacocks and clear

the blockage.

The macerator pump makes

an unusually loud noise or

repeatedly trips the circuit

breaker.

There is foreign material in the

pump chamber.

Close the seacocks and clear

the foreign material.

The toilet does not ﬂush aer

pushing the ﬂush switch.

The holding tank is full and a

signal from the tank has shut

down the electrical power to

the toilet.

Empty the holding tank.

Electrical power to the toilet is

shut oﬀ or disrupted.

Check the wiring or circuit

breakers/fuses.

The ﬂush switch is

malfunctioning.

Replace the ﬂush switch.

The circuit board in

the control module is

malfunctioning.

Replace the control module.

Not enough, or no water,

enters the bowl.

The water supply line is

pinched or kinked.

Straighten the water supply

line to remove the pinch or

kink.

The screen in the water valve

is blocked.

Clear the blockage at the

water valve.

The intake water ﬁlters

are blocked (in raw water

systems).

Clear the water ﬁlters.

The water valve is

malfunctioning.

Replace the water valve.

The water ﬂow is weak during

bidet operation.

The inlet screen at the hot or

cold connection at the toilet/

bidet mixer valve is clogged.

Disconnect the water lines

from the mixer valve and clean

the screen.

The aerator in the bidet

nozzle inside the toilet bowl is

clogged.

Remove and clean the aerator

nozzle.

The toilet/bidet mixer valve

assembly is not functioning

properly.

Replace the mixer valve

assembly.

Otros manuales para 8000 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Baño de Dometic

Dometic

Dometic Saneo B Manual de usuario

Dometic

Dometic M65-700 Manual

Dometic

Dometic SeaLand MasterFlush 7120 Manual de usuario

Dometic

Dometic CT 4050 Manual de usuario

Dometic

Dometic 8000 Series Manual de usuario

Dometic

Dometic 300 Series Manual de usuario

Dometic

Dometic CT 4050 Manual de usuario

Dometic

Dometic 300 Series Manual de usuario

Dometic

Dometic MasterFlush MF 8152 Manual de usuario

Dometic

Dometic MasterFlush Series Manual de usuario

Dometic

Dometic CT 4050 Manual de usuario

Dometic

Dometic MasterFlush 7600 Series Manual de usuario

Dometic

Dometic CT*4 series Manual de usuario

Dometic

Dometic Saneo B Manual de usuario

Dometic

Dometic 4300 Series Manual de usuario

Dometic

Dometic 970 SERIES Manual de usuario

Dometic

Dometic MASTERFLUSH MF7100 Manual de usuario

Dometic

Dometic 4000 Series Manual de usuario

Dometic

Dometic MASTERFLUSH MF7100 Manual de usuario

Dometic

Dometic CT 4110 Manual de usuario

Dometic

Dometic SeaLand MasterFlush 8900 Series Manual de usuario

Dometic

Dometic 4300 Series Manual de usuario

Dometic

Dometic CT 4110 Manual de usuario

Dometic

Dometic CT 4110 Manual de usuario

Manuales populares de Baño de otras marcas

Toto

Toto Washlet TCF4911 Series Manual de usuario

Kohler

Kohler K-6419 Manual de usuario

Grohe

Grohe Sensia ARENA Manual de usuario

Kohler

Kohler K-5171K Instrucciones de montaje

Geberit

Geberit AQUACLEAN MERA CLASSIC Manual de usuario

Kohler

Kohler K-24097X Instrucciones de montaje

Better Bathrooms

Better Bathrooms BUN/BeBa 27555/78725 Manual de usuario

American Standard

American Standard CONCEPT Cube TF-2704 Manual de usuario

BIOLAN

BIOLAN ECO Manual de lista de piezas

Thetford

Thetford C260 Series Manual de usuario

KELISS

KELISS T162A Series Manual de usuario

Kohler

Kohler K-22241K Instrucciones de montaje

Kohler

Kohler ESCALE K-32771T-NS Manual de usuario

BIOLAN

BIOLAN GARDEN TOILET Manual de lista de piezas

washloo

washloo Prestige Manual de usuario

JABSCO

JABSCO 37010 Series Manual de usuario

Drive

Drive TSE 150 Manual de usuario

Olympia

Olympia EPOQUE 69209 Manual de instrucciones