DIVIN DV5 Series Manual de usuario

www.divinwinefridges.com.au

Thank you very much for choosing DIVIN wine fridge
to store your precious collections! We hope you may enjoy using it.
Purchase Date:
Serial Number:
*The serial number is located on the data plate, which can be
found on the inner wall of the wine fridge. Please write down your
serial number in the blank.
*The purchase date is the date when the warranty begins.

1
General Instructions Before Usage
● This appliance is not intended for children, please pay attention to their safety.
● ● Check the conditions of the product and take photos as you are receiving it from the
delivery company. Inform them immediately when noticing any damages caused
during transportation.
● Install the appliance only on a sturdy, flat, and level surface and be cautious during the
installation at all times.
● Keep any packaging materials if needed for the future and keep them away from
children.
● Make sure your power supply sources have met all the electrical standards required by
laws. DO NOT use extension cords; use an exclusive and properly installed outlet
instead.
For safety and a better user experience, please read all instructions before using this product
and retain the user manual for future reference.
Further assistance from DIVIN
Website-Support: https://divinwinefridges.com.au/support/
E-mail: [email protected]
Tel: 0484 308 208
Business Hours: 7:30-16:00 (Mon.-Thu.) | 7:30-14:00 (Fri.)
To ensure the cooling system may function properly, after this wine fridge has been
laid down during transportation and delivered, allow it to rest unplugged in a standing
position (with the base situated on the floor) for at least 24 hours before turning on
for use.

2
1
3
5
6
7
8
11
12
13
15
Table of Contents
General Instructions Before Usage..........................................
Installation................................................................................
Important Safeguards & Warnings...........................................
The Touch Controls and Operation..........................................
Wine Rack & Bottle Configurations..........................................
Temperature Setting & Energy Saving Recommendations......
Bottle Capacity.........................................................................
Care and Maintenance.............................................................
Troubleshooting Guide.............................................................
Warranty and Terms.................................................................

Note: The heated surfaces may help reduce the chance of condensation on the
surfaces of the wine fridge and door frame.
Important Safeguards & Warnings
● All the instructions of this user manual must be read and adhered carefully to ensure
safety, proper performance of the product, and the validity of DIVIN’s warranty.
●
● It is ideal for the appliance to operate in an indoor space that is between 5°C-35°C. If
the temperature is much higher and lower than this range, the normal operation will be
affected and the temperature of the wine fridge may be unstable or may not reach the
desired temperature.
● DO NOT place the wine fridge near any heat sources (e.g. gas stoves, heaters, etc.)
and in direct sunlight.
● Wine fridges with compressors are not noiseless and may produce different sounds
when in use. Therefore, it is not recommended to install them in bedrooms.
● To avoid electric shock, DO NOT use the wine fridge or wire plug near wet locations.
Also, DO NOT operate the product with wet hands.
● Extension cords are not recommended. Use a separate outlet that complies with the
safety regulations. Never unplug the unit by pulling on the power cord. Always grasp
the plug firmly and pull straight out from the outlet.
● The surfaces of the wine fridge may become heated temporarily due to the operation
of the refrigeration system. DO NOT touch the heated surfaces. When the cooling
process stops, the heated surfaces will start to cool down.
● It is recommended to use a soft cloth and soap water to clean the wine fridge before
use. DO NOT use flammable liquids to clean the unit to avoid fire hazard or explosion,
especially when there is a fire source around (e.g. a gas stove in operation).
3
This wine fridge is designed for commercial and residential indoor environments
(excluding garages and other places that can have extreme temperature shifts) only for
storing a wide variety of wines. If the wine fridge is used for purposes other than wine
storage and causing damages to the unit directly, then we cannot provide full warranty.

avoiding any
and the
proper air
methods
electrical
4
● ● Keeping the interior and exterior of your wine fridge clean and tidy and
spillage of wines inside the unit.
● ● Make sure the environment, where the appliance is used, is well-ventilated
front exhaust openings are not blocked by any objects that may prevent
circulation.
● The wine fridge is equipped with an auto defrost system. DO NOT use other
to speed up the defrosting process.
● When relocating the unit, remove the wines stored inside first to reduce the weight.
● The warranty applies only to the wine fridge itself and does not cover the stored items.
● If you wish to dispose of this product, please send it to an authorized large
recycling facility.
When cleaning, DO NOT spray any cleaning chemicals around the front exhaust
openings and the back of the appliance. This can avoid damages to the metal pipes that
are around the compressor. When damages happen, refrigerant may leak and eventually
cause the malfunction of the cooling system.
When stop using the product for a long time, open the door to ventilate to avoid
excessive moisture staying inside the unit. After that, lock the door to prevent children
from being injured.

Installation
59 cm 3 cm
60.5 cm
83 cm
57 cm
59.5 cm
82 cm
A
B
*Reserve 3cm extra distance only when the power outlet is right behind the
wine fridge.
*The reserved built-in space does not include the projection of the handles (4.3cm).
115°
71.5 cm
53 cm
59.5 cm
5

The Touch Controls and Operation
There are 2 touch control panels in each temperature zone (the left and right
cabinets), which operate separately when adjusting temperature settings.
NOTE: Just a gentle touch is required to activate multiple settings from the
touch control panels.
Turning on/off the unit:
Touch the Power button once and hold for about 3 seconds for turning on the
unit. Repeat again until seeing a “3, 2, 1” countdown to turn off the unit.
NOTE: The countdown is designed for preventing turning the unit off
accidentally.
Turning on/off the LED lights:
Touch the Power button once to turn on and touch once to turn off.
Setting a desired temperature:
Before touching the Temperature button, the temperature shows on the
screen represents the current temperature of the cabinet. By touching it
once, the number that starts to flash represents the current set temperature.
While it is still flashing, touch again and again to start adjusting the
temperature and stop touching when seeing the temperature that you would
like to set to.
NOTE: The temperature setting remains the same after a power outage and
the unit will turn on by itself and operate according to the previous
temperature setting.
Celsius/Fahrenheit Conversion:
Touch the Temperature button once and hold for about 3 seconds to convert
from Celsius to Fahrenheit. Repeat again for changing it back.
Power On/Off
LED Light On/Off
Temperature Setting
Celsius/Fahrenheit Conversion
6

● Install the wine fridge in a cool and ventilated area and away from any heat
sources (e.g. sun light, ovens, less insulated spaces, etc.).
● Avoid opening the doors frequently or for too long.
● Set the temperature around 12-14°C for both temperature zones (the left
and right cabinets); not only is it more energy saving, but also helps store
any wines for a long term and serves whites and rosés at the same time.
● Set the two temperature zones at the same temperature.
When the temperature of the wine fridge is over 23°C or lower than 0°C, an
alarm with beeps will begin, which will stop once the temperature is lower
than 23°C or higher than 0°C.
NOTE: The alarm can be deactivated by pressing any buttons on the control
panels.
Temperature Setting Tips:
The temperature of the wine fridge can be set to accommodate your wine
collections and storage requirements. If your collections include age-worthy
and ready-to-drink wines, we recommend to designate the left cabinet for
ready-to-drink and the right cabinet for maturation or vice versa. The best
temperature for maturing wines is around 12-14°C.
NOTE: Lower temperatures (12-14°C) are better for achieving ideal
maturation at a normal rate, while high temperatures will speed up the
maturation process, but do not necessarily result in good results.
The temperature of the ready-to-drink cabinet can be set according to the
serving temperature of the type of wines that are stored in that cabinet. In
general, the ideal serving temperature for red wine is anywhere between
15-18°C; 10-14°C for whites and rosés; 6-8°C for dessert wines; 5-10°C for
sparkling wines. However, the actual optimal serving temperature depends
on the characteristics of the wine (wine body, vintage, whether it has been
aged in oak barrels, etc.). Therefore, please refer to the recommendations
provided by wineries for the ideal serving temperature of their wines.
Temperature Setting & Energy Saving Recommendations
Energy Saving Tips:
High/Low Temperature Alarm
7

8
Wine Shelves & Bottle Configurations
Detachable Beechwood Shelves
Unit: cm
Standard Bordeaux
750mL
Burgundy
750mL
Riesling
750mL
Sparkling or Champagne
750mL
12
32
8.8
F
6.1
14
23.6
G
Bordeaux
375mL
6.5
11.5
24.2
H
Burgundy
375mL
7
11
26.2
I
Champagne
375mL
Burgundy
750mL
Barolo, Brunello di Montalcino
750mL
*When taking/placing bigger bottles on a beechwood shelf, raise up the shelf that is right above it for easier access.
Otros manuales para DV5 Series
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Electrodoméstico de cocina de DIVIN



















