TCND-I-PR Range
www.distech-controls.eu
10) « up arrow » key: action by function selected
A push on key « up arrow » has an action which depends on the function key previously supported:
In temperature command: inscrease the value of detection timing
In fan speed command: inscrease the value of lux level sensitivity of multi sensor
In lighting command: inscrease the lighting setpoint or the gap circuit between 1st day and 2nd day.
11) « down arrow » key: action by function selected
A push on key « up arrow » has an action which depends on the function key previously supported:
In temperature command: decrease the value of detection timing
In fan speed command: decrease the value of lux level sensitivity of multi sensor
In lighting command: decrease the lighting setpoint or the gap circuit between 1st day and 2nd day.
12) « rotate arrow » : test
A push on key « rotate arrow »:
Flashes actives menus
Shows the battery state to display the text « BAT. ON » when battery are a good state of charge or
« BAT. OFF » in otherwise.
Show state battery on digits of LCD.
LCD display:
(flashing active menu)
Standby mode: display « ConF »
Lighting mode: display « Lu. » or « dE1°2 »
Offset mode: display « tPo »
Fan speed mode: display « SenS »
Request NSD mode: display « nSd »
Occupied mode / inoccupatied mode / initialization filtering
temperature : no display
