Dish Network Hopper Manual

HOPPER DUO

SETUP

INSTRUCTIONS

• If you are not seeing the screens listed in this guide, try changing your TV’s

input by pressing the “Source/Input” button on your TV.

• When you reach the activation stage of this guide, you will need either your

account number or your previous receiver’s ID number.

• Account number: Located along the upper-right corner of your DISH bill

or in the My Account Summary section of your mydish.com account.

• Receiver ID: Located on a label on the back of your previous receiver. It

begins with “R.”

• To ﬁnd your closest UPS dropo location or to schedule a pickup at your cost,

call 1-800-742-5877 or visit ups.com/dropo.

Do you have questions?

Take a look at the back cover of this guide to contact DISH!

Disconnect Your Cables

Locate the power cable for the

Hopper Duo that you are replacing

and unplug it from the wall.

Locate the cable connected

to the “To Hub” port, and then

unscrew it from the receiver. Do

not unscrew it from the wall.

Locate the cable connected to the “Ethernet” port,

and then unplug it from the receiver. Do not unplug it

from the wall. (You may not have this cable.)

Disconnect Your Cables

HDMI 1

Determine the cable you are

using to receive audio/visual

signal. Then, unplug it from the

receiver but not from your TV.

AUDIO

VIDEO

HDMI CABLE RCA CABLES

Ethernet

Connect the Home Video Network

cable to the “To Hub” port on your

replacement receiver.

Connect Your Cables

Ethernet

Connect the Ethernet cable to the

“Ethernet” port on your replacement

receiver. (You may not have this cable.)

Connect either the RCA cables

or the HDMI cable to the

corresponding port(s) on your

replacement receiver.

Connect Your Cables

HDMI CABLE RCA CABLES

HDMI 1

AUDIO

VIDEO

Power Your Equipment

Plug the power cord from your

Hopper Duo into a power outlet,

and ensure that your TV is still

plugged in. Turn on your TV. It

could take up to 30 seconds for

you to see any images.

Make sure that the SmartCard is

secured ﬁrmly in the slot on the

side of your Hopper Duo.

Power Your Equipment

You will see a loading screen,

which could last for several

minutes.

When the Install Wizard screen

appears, go to step 4.

Pair Your Remote to Your Hopper

Press the SAT button on your

remote control to pair it to your

Hopper Duo. All of your previous

receiver’s recording timers and

other settings will be restored

automatically.

Once your remote is paired, the

Install Wizard will proceed to the

next step automatically.

Set Up Text to Speech

If you would like to have a digital

voice read the text onscreen, use

your remote control to highlight

the “Continue with Text to Speech”

button. Then, press SELECT.

If you do not want a digital voice to

read the text onscreen, use your

remote control to highlight the

“Next” button. Then, press SELECT.

Otros manuales para Hopper

Tabla de contenidos

Otros manuales de DVR de Dish Network

Dish Network

Dish Network Hopper Manual de usuario

Dish Network

Dish Network Hopper with Sling Manual de usuario

Dish Network

Dish Network DISH Player-DVR 522 Manual de usuario

Dish Network

Dish Network Hopper Joey Guía del usuario

Dish Network

Dish Network DuoDVR ViP 622 Manual de usuario

Dish Network

Dish Network ViP 722 Manual de usuario

Dish Network

Dish Network Hopper Manual de usuario

Dish Network

Dish Network Hopper with Sling Manual de usuario

Dish Network

Dish Network Hopper 3 Manual de usuario

Dish Network

Dish Network DVR Satellite System Manual de usuario

Dish Network

Dish Network DuoDVR ViP 922 Manual de usuario

Dish Network

Dish Network DP512 Manual de usuario

Dish Network

Dish Network DuoDVR ViP 622 Manual de usuario

Dish Network

Dish Network VIP 922 SingLoader DVR Manual de usuario

Dish Network

Dish Network Dish Player-DVR Manual de usuario

Dish Network

Dish Network Two-TV DVR Manual de usuario

Dish Network

Dish Network 622 guide Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario