DISCOVER D900 Manual de usuario
Manual D900 Wireless
Headsets
2
1
4
3
2
9
10
6
5
8
7
11
A. Telephone Only base station
1. Battery Indicator
2. Auto answer disable button
3. Headset registration button
4. Online indicator
5. Power socket
6. EHS port
7. Telephone connector (’Tel’ port)
8. Handset connector
9. EHS Selection switch
10. Microphone volume up/down
11. Wiring switch
3
1
4
3
2
10
11
5
7
6
9
8
12
B. Telephone/USB PC base station
1. Battery Indicator
2. PC button
3. Telephone (TEL) button
4. Online indicator
5. USB connector (PC port)
6. Power socket
7. EHS port
8. Telephone connector (’Tel’
port)
9. Handset connector
10. EHS Selection switch
11. Microphone volume up/down
12. Compatibility switch
4
1
3
2
4
5
6
C. Discover D903
1. Receive volume up/down
2. Mute
3. Headset ON/OFF
4. Noise cancelling boom
5. Replaceable earplug
6. Battery
5
5
1
2
3
4
D. Discover D901/D902
1. Receive volume up/down
2. Mute
3. Headset ON/OFF
4. Noise cancelling boom
5. Battery
6
Contents:
7
8
8
8
8
9
9
9
10
10
10
10
11
11
11
11
11
11
12
12
13
13
13
14
14
1. Product description
2. Setup
2.1 Connecting to a telephone or terminal with a headset port
2.2 Connection to a telephone or terminal without a headset port
2.3 Connecting to a compatible handset lifter (refer to your supplier)
2.4 Connecting EHS with DHSG protocols (refer to your supplier)
2.5 Connecting to a computer USB port (Models D901, D902, D903 only) 2.6
Wearing style
3. Operation
3.1 Making and receiving calls
3.1.1 Making an outgoing call in telephone mode
3.1.2 Receiving an incoming call in telephone mode
3.1.3 Making an outgoing call in VOIP mode (Models D901, D902, D903 only)
3.2 Adjusting the ring volume
3.3 Muting the headset microphone
3.4 Headset transmitting volume setting
3.5 Adjusting headset receive volume
3.6 Out of range and reconnection
3.7 Battery level indication
3.8 Making a conference call
3.9 Registering headsets to the base
3.10 Using multiple headsets
3.11 Using the D900 series with Microsoft Lync (Models D901, D902 and D903
only) 3.12 Switching Off Auto Pickup Mode (Telephone only base station) 3.13
Overview of audio signals
4. Troubleshooting 15
7
1. Product description
The Discover D900 series is a fully wireless headset solution offering the user the
ability to work ‘handsfree’ with true wireless mobility.
Main features:
ŸDECT wireless headset solution
ŸUniversal headset base
ŸUp to 9 hours talk time without recharging
ŸEco-Low Radiation Dect with dynamic power adjustment
ŸAuxiliary port for connecting handset lifter or electronic hookswitch device
ŸNoise cancelling microphone for reduced background noise
ŸSecure high quality audio
ŸReceive volume control on headset
ŸMute button on headset
ŸTalk button with LED on headset
ŸMagnetic charging unit
ŸOperating Range up to 400m/1300 ft (Over-the-ear headset up to 300m)
Ÿ‘Out of range’ warning
ŸDECT 6.0/GAP compatible
ŸDHSG protocol
ŸPC/USB connectivity * (Models D901, D902 and D903 only)
ŸThree way conferencing by connection additional headset
* Will connect to Apple Mac OS X or PC running Windows XP, Windows Vista,
Windows 7, 8 & 10.
8
2. Setup
Ÿ Connect the power adaptor supplied with the product to the base unit.
The base power LED with light.
NOTE: The first time you use your headset, it is recommended that the headset is charged
for a minimum of 4 hours before use.
2.1 Connecting to a telephone or terminal with a headset port
Ÿ Using the headset cord supplied with the product, connect the 'Tel' port on headset
base with the headset port on your telephone.
Ÿ Use the power adaptor supplied with the product to connect the headset base to a
power socket.
Ÿ You may need to adjust the wiring switch that is located on the bottom of the
headset Base to find the correct wiring for your device.
2.2 Connecting to a telephone or terminal without a headset port
Ÿ Using the headset cord supplied with the product, connect the 'Tel' port on headset
base with the 'handset' port on your telephone.
Ÿ Connect the telephone handset cord to the handset port on the headset base.
Ÿ Use the power adaptor supplied with the product to connect the headset base to a
power socket.
Ÿ You may need to adjust the wiring switch that is located on the bottom of the
headset base to find the correct wiring for your device.
2.3 Connecting to a compatible Handset Lifter (refer to your supplier)
Ÿ Fit the handset lifter to your telephone as indicated in its user guide.
Ÿ Connect the handset lifter to the 'AUX' port located on the back of the Headset Base.
Ÿ Ensure that the EHS selection switch is set to ‘RHL’.
9
2.4 Connecting EHS with DHSG protocols (refer to your supplier)
ŸConnect the Discover DHSG cable to your telephone as indicated in its user guide.
ŸConnect the Discover DHSG cable to the ‘AUX’ and ‘Tel’ ports located on the back of the
headset base.
ŸEnsure that the EHS selection switch is set to ‘DHSG’.
With the handset lifter or DHSG cable connected, you will be able to answer and end calls using
the button located on the headset while away from your desk.
2.5 Connecting to a computer USB port (Models D901, D902 and D903 only)
ŸConnect the USB cable supplied with the product to the 'USB' port on the back of the
headset base and to an available USB port on your computer.
Ÿ· The computer should automatically recognize the device and install the correct drivers.
Wait a few seconds before using the headset.
2.6 Wearing Style
The Discover D900 series is available in three headset variants:
ŸDiscover D903 (Over-The-Ear)
ŸDiscover D901 (Monaural)
ŸDiscover D902 (Binaural)
To replace the earplug of the Discover D903 Over-the ear headset, twist the earplug 90 degrees
and pull the earplug towards you.
To replace the ear cushion of the Discover Over-the-head monaural or binaural, put your thumb
on the top of the speaker and carefully pull the ear cushion at the bottom towards you.
10
3. Operation
3.1 Making and Receiving Calls
3.1.1 Making an outgoing call in Telephone mode
Ÿ Ensure that the 'TEL' button on top of the headset base is selected.
Ÿ Lift the headset from the base to start a call. If you are already wearing the headset,
press the headset’s ‘ON/OFF’ button. The base 'Online Indicator' LED will light. If a
handset Lifter or Electronic Hookswitch device is connected to the headset base, the
line will be seized. Otherwise, you will also need to activate the Headset port via your
telephone terminal.
Ÿ Dial the telephone number on the telephone terminal
Ÿ After finishing the call, replace the headset on the base or press the ON/OFF button
to disconnect. The 'Online indicator' LED will turn off.
3.1.2 Receive an incoming call in Telephone mode.
Ÿ If there is an incoming call from the telephone line and the headset base is connected
to a handset lifter or Electronic Hook switch device, the 'TEL' LED and 'headset' LED will
flash, also a ring tone will be heard on the headset.
Ÿ Lift the headset from the base to answer the call. If you are already wearing the
headset press the headset’s ‘ON/OFF’ button . The base 'online indicator' LED will light.
If a handset Lifter or Electronic Hookswitch device is connected to the headset base,
the line will be seized. Otherwise, you will also need to activate the headset port via
your telephone terminal.
Ÿ To end the call, replace the headset on the base or press the headset ON/OFF button.
Tabla de contenidos
Otros manuales de Auriculares de DISCOVER
