INTRODUCTION
Congratulations on your purchase of this product. This
User Guide is for the DCHD-B365-23IR. This camera
utilizes the latest Sony technology. This camera is water
resistant, can be used in day or night environments, and
indoor or outdoor. In addition, it owns the characters of
high definition and stability, strong anti-jamming, rich and
real color. Easy to mount. Great for your CCTV system.
Please read this instruction manual carefully to ensure
proper use of the product.
CONNECTING
PRODUCT INFORMATION
Thank you for choosing DirectConnect
Thank you for choosing DirectConnect ®
®
Products
Products
* Sensor (CCD)
SONY 1/3"High Resolution CCD Sensor.
* Night-time Vision
0 Lux with IR LED on. High quality IR LEDs,
achieving very good night-vision effects.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The camera can
produce high definition picture in a low Lux environment.
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
* Gamma Characteristic
Camera Gamma characteristic is 0.45.
* Scanning Mode
NTSC or PAL mode.
DC12V Power Supply
Monitor
DCHD-B365-23IR
TROUBLE AND SOLUTION
Link wire rule：
Power
Video
Note:
● Please understand the camera’s operating temperature and be
aware of its environment. Avoid using the camera at too high or too
low temperatures. The operating temperature is -22 ~ 140°F / -10~ +45°C
. (Recommend operating temperature is (-22 ~ 140°F / -10~ +45°C.)
● Do not allow the camera to face the sun or bright objects. Damage
may result
● Do not mount the camera near a radiator or heater.
1. No Picture with power on
. Check the power supply voltage and polarity.
. Please check all the connection cables and monitors for proper connections.
2. The picture level direction has flowing interference ripples
. Could be caused by the power supply, an EMI / RFI filter may be needed.
. Check the monitor and peripheral equipment.
3. The picture background color changes continuously
. Fluorescent lamp’s electromagnetic field may cause color roll. This is the
proper phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
4. Picture smear
. The power supply’s voltage is unstable.
. Connecting cables are incorrectly connected or may have impedance.
To prevent fire or shock hazard, do not expose the unit to
This symbol is intended to alert the end user to important
The symbol is intended to alert the user to the presence of
water .
operating and maintenance (instructions)
Instructions in the literature accompanying the appliance.
Uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
Notes：
● When using power supplies other than the one included - make sure
the voltage, current, voltage polarity, and operating temperature
matches this camera’s requirements (see specifications to verify)
● When operating the camera in a lightning storm, please remember to
mount lightning arrestor or disconnect the power supply plug and video
cable.
● In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BACK. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTROCUTION. DO NOT OPEN
CAUTION: To prevent electric shock and risk of fire hazard,
do NOT use other than specified power source.
*DirectConnect® is a registered trademark.
*UL®is a registered trademark of Underwriters Laboratories.
Do not cut either cable.
