2. Language: Press “ ”/“ ” to select “Language”, and press “ ” to enter.
Press “”/“ ” to choose your language. And press “ ” to confirm and exit.
3. AV Out: Press “ ”/“ ” to choose “AV Out”, and press “ ” to enter.
Press“ ”/“ ” to choose “PAL/NTSC”, press “ ” to confirm video displayed
on TV screen. Pull out AV cable, video will show on DVR screen.
4. Format: To format the SD card, press “ ”/“ ” to select “Format”, and
press “ ” to enter. Press “ ”/“ ” to choose “Yes”. Press “ ” to confirm &
exit.
5. Power Save: Press “ ”/“ ” to select “Power Save”, and press “ ” to
enter:
a) Auto LCD Off: Press “ ”/“ ” to select “ Auto LCD Off”, and press “ ” to
enter. Press “ ”/“ ” to select “1 MIN”/“5 MIN”/“Off”, and press “ ” to
confirm & exit. If “Auto LCD Off” is on, the LCD screen will automatically shut
off when the set time is due. Press any key to recover screen display.
b)Auto Power Off: Press “”/“ ” to select “Auto Power Off”and press “”
to enter.Press “ ”/“ ” to select “ 5 MIN”/“10 MIN”/“Off”, and press “ ”
to confirm & exit. If you turn on “Auto Power Off”, the DVR will automatically
shut off when the set time is due.
6. Firmware Update: Press “ ”/“ ” to select “Firmware Update”, and press
“” to enter. Press “ ”/“ ” to select “Yes”, and press“” to start
update. Please remember to save the update file “
zburnT_C11.run.elf
” at the
root directory of the SD card.
7. Default Setup: Press “ ”/“ ” to select “Default Setup”and press “” to
enter. Press “ ”/“ ” to select “Yes” and press “” to confirm. Press “”
to exit.
8. Memory Info: Press“ ”/“ ” to select “Memory Info”, and press “ ” to
view capacity of SD card. Press “ ” to exit.
9. Version: Press“ ”/“ ” to select “Version”and press “ ” to view version
information. Press “ ” to exit.
AMK4012-D15 manual Page 9
