Digitus DN-15022 Manual de usuario
1
POWERLINE HIGH SPEED
NETWORK BRIDGE
Quick Installation Guide
2
Important Safety Instructions
This product is intended for connection to the AC power line.
The following pre-cautions should be taken when using this product:
Please read all instructions before installing and operating this product.
Please follow all warnings and instructions marked on the product.
Do not operate this product near water.
This product should never be place near or over radiator, or heat register.
This product relies on a building’s electrical installation for short-circuit (over current) protection.
Ensure that a fuse or circuit breaker is used on the phase conductors (all current-carrying
conductors).
Do not allow anything to reset on the product interconnect cords.
Do not locate this product where people may walk on the cords.
The power cord should be plugged directly into a specification AC wall outlet.
Only a qualified technician should service this product. Opening or removing covers may result
in exposure to dangerous voltage points or other risk.
Unplug this product from the wall outlet and refer the product to qualified service personal for
the following conditions:
1. When the interconnect cords are damaged or frayed.
2. If liquid has been spilled onto the product.
3. If the product has been exposed to rain or water.
4. If the product does not operate normally when the operating instructions have
been followed.
5. If the product exhibits a distinct change in performance.
Package Content
• 200Mbps Powerline Ethernet Adapter
•RJ-45 Cat.5 Cable
•Quick Installation Guide, and CD-ROM(Include Utility and user manual)
•Quick Installation Guide
If any of the above items are missing or damaged, contact your local dealer for support.
3
LED Definition
Button Definition
LED Color Status Description
Power
Green On Power is on
Green Blink
●System enters the power save mode.
●System is resetting.
●System is in the process of security setup.
-Off Power is off
Ethernet
Green On The device is connecting to other devices via the Ethernet
interface but not communicating with them.
Green Blink The device is receiving or transmitting data via the Ethernet
interface.
-Off The device is not connecting to other devices via the Ethernet
interface.
Data
Green/
Red On
The device has connected to the power line network. The Data
LED color will vary according to the physical rate.
●Green: Link Rate > 40 Mbps
●Orange: 20 Mbps< Link Rate <40 Mbps
●Red: Link Rate< 20 Mbps
Red Blink When the device is scanning other PLC devices, the Data
indicator blink quickly.
-Off The adapter has not found any other compatible power line
devices that use the same encryption key.
Button Description
Reset Reset to factory default
Security Press security button during 1~3 seconds Join a another HomePlugAV network
Press security button more than 10 seconds Set its security to random value
4
Connecting Powerline Ethernet Adapter
Hardware Installation
Step 1.
Connect one Powerline
Ethernet bridge to your
ADSL or Cable modem’s
Ethernet port.
Step 2. Plug it into the nearest
power socket.
Step 3.
Plug in the second
Powerline Ethernet
bridge next to your PC and
connect the Ethernet
ports.
Step 4.
Internet access from any
power socket in your
home.
5
Utility Installation for Windows
The installation procedure for the Powerline Configuration utility will vary depending on
which operating system you are using on your computer. The following procedure is for
installation under Windows XP. Installation on other operation system is similar.
1. Insert the CD into the CD-ROM drive to initiate the Autorun program.
Once completed, a menu screen will appear.
2. Click on the “Powerline Configuration Utility” hyperlink in 200M Powerline Adapter
field to start the installation. If the menu screen is not shown, you can start the installation
as follows.
• Click on Start Menu/ Run.
• Enter “E:\Utility\setup.exe” in the appeared box, where “E” is the letter of
your CD-ROM drive.
• Click on “OK” button.
3. The utility will be installed into your computer
and a new icon called “PowerPacket Utility”
will appear on your desktop.
This utility is only for Windows 2000, 2003, XP, and Vista.
Note
Further Configuration
If you want to configure more detail settings of the Powerline Adapter, please refer to user’s
manual on the bundled CD.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Hardware de red de Digitus
Digitus
Digitus DN-16121 Manual de usuario
Digitus
Digitus Unique Series Manual de usuario
Digitus
Digitus DS-55317 Manual de usuario
Digitus
Digitus DN-95131 Manual de usuario
Digitus
Digitus DN-91624S-SL-EA Manual de usuario
Digitus
Digitus DN-16111 Manual de usuario
Digitus
Digitus DN-16150 Manual de usuario
Digitus
Digitus DN-16114 Manual de usuario
Digitus
Digitus Professional DN-95321 Manual de usuario
Digitus
Digitus DN-7071 Manual de usuario
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
