Digital sound player with remote control and 50+ tracks.
Thank you for purchasing Digital Sound Player DSP 64RC. Please read this manual before using the device and
save it for future reference. Follow the instructions to avoid damage to the device.
This device is designed for:
Chasing away birds damaging crops in vineyards and orchards;
Chasing away bee-eater birds destroying bee colonies;
Chasing away birds contaminating the facades of buildings or preventing flight safety in the vicinity of
airports;
Calling birds and animals for research purposes.
The digital device and the speaker are united in a water resistant and shockproof body, which minimizes the size
of it and increases reliability. The loudspeaker is specially designed to play digital recordings without distortion
in wide frequency range. The control is done entirely by the remote control and includes:
Direct dial tone playback
Volume control
Special mode to mixes two tunes
ON/OFF Power (switch to standby)
DSP 64RC is capable to reproduce high precision real sounds of distressed birds or raptors etc. All sounds are
easy to manage and can be programmed so as to avoid effects of habituation of birds to them. The sounds are
recorded on digitally ensuring long-term trouble-free operation of the device. Use for hunting is prohibited by
law in some countries.
For normal operation the device needs source of constant voltage with nominal 12V, which is not included in the
set. For this purpose could be used:
SLA Battery: 12V/1.3Ah, 12V/2Ah, 12V/4Ah etc.
12V car battery
220VAC/12VDC-0, 5A AC adapter / converter
Remote control manual.
With the remote control you can control:
1. Current melody: Chose corresponding melody number. After pressing the first number the remote control
indicator blinks once in green, and after pressing the second one it blinks twice in the same color. The melody
could contain a sequence of different sounds combined with pause breaks, as well as sounds with changed order
or variable playing speed. More information about the type and the content of each melody could be found on
the device’s label.
2. Sound control: Press and hold „ “for increase and „ “for decrease of the sound level. The remote control
indicator blinks rapidly in green light. When maximum or minimum level is reached the indicator blinks slower
in green.
3. Mixing melodies: To mix two melodies press the MIX button. The remote control indicator will blink once in
green and then you can chose second track as it is described in section 1.
4. Stand-by mode: Press “ ” button, the remote control indicator will blink once in green. The device goes into
reduced energy consumption mode and the indicator will blink in red briefly until the button is pressed again. It's
recommended after finishing using the device to disconnect it the battery power cable, because prolonged time in
stand-by leads to damaging the battery.
