Digital ID View NW-STA-5016 Manual de usuario
NW-STA-5016/5009/5004
USER MANUAL
USER MANUAL
Networked DVR
16CH/9CH/4CH
NW-STA-5016/5009/5004
Networked DVR Product Feature
116/9/4 CH Multiple camera Input
4Able to record the CIF size(320*240) video
Image at the speed of 120/240/480 fps
(frame for second)
5Large quantity HDD backup function by using
IEEE1394 and USB2.0 Memory and CD/DVD
6MPEG4 H/W Compression with high compres-
sion rate 1~3K
8Central Integration with CAMS Checker
For Real time Health Check
2Embedded XP O/S of DOM(Disk On Memory)
solution Mounted
3Pentapllex Multi tasking for Monitoring
And recording and searching and networking
9Two Way audio communication and broadcas-
tIng by CMS,CM Server
7Intelligent camera move away detection
2
Page: NW-STA-5016/5009/5004 User Manual
User Manual
Contents
Contents
Chapter 1 Service Requirement
Chapter 2 Product Information
Chapter 3 Basic Product Operation
Chapter 4 System Setup
Chapter 6 Warranty
Chapter 5 Firmware Upgrade
3
4
6
24
49
52
3
Page: NW-STA-5016/5009/5004 User Manual
User Manual
Chapter 1
Limitation of warranty
We warrant that DVR series will be free from defects in materials and workmanship
under normal use and service for all parts excluding hard drives for a period of one year after
the date that the customer purchased the product.
If such a defect occurs, you should contact where you purchased and return the product to us
accompanied with the proof of purchase, we will either repair or replace the product through
our inspection. It is your exclusive remedy for breach of this warranty. However this warranty
shall not apply on repairs or replacements necessitated by any cause as listed below.
1) improper installation
2) acts of nature
3) accident
4) lack of proper maintenance
5) voltage fluctuations
6) unauthorized repair or modifications.
For more details on the limitation of warranty, refer to entire limited warranty as appendix at
the end of this manual.
Service Information
•To avoid additional defects, do not attempt to repair this unit by yourself. Please contact
a local dealer/distributor/certified installer to get service from authorized
technician. Unauthorized repairs will void the warrantee, may result in fire, electronic
shock or other hazards.
•All shipment for repair should be prepaid and properly packed with a note outlining the
defect.
•Send the product with purchase number or other related documents obtaining from Fore
Tech or its agent as proof purchasing the product.
Service Requirement
4
Page: NW-STA-5016/5009/5004 User Manual
User Manual
Chapter 2 Product Information
Enable integrated video monitoring and system management by networking with maximum
1000DVRs systems through CAMS(Central Automated Monitoring System) interface.
High quality video display and system stability through embedded operating system with
hardware MPEG4 video compression chip.
Support the max D1(720*480) quality resolution video display and 120FPS recording.
4/9/16 CH video input and 4 CH audio input.
X-Triplex multitasking for video recording, playback, transmission and backup.
Easy operation using remote-controller, full-page panel, GUI support.
Network transmission of 30 different types of system error management information per
system.
High-speed transmitted video monitoring of ST DVRs up to 64 channels through CMS
software network.
High-speed network video monitoring by internet explorer through WEB CMS server within
the system.
zFeatures
Watchdog function for hardware & software error
Robust design for physical impact and temperature
Generating 30 different types of network massages for system errors.
Application of low power and low heat features for industrial environment
zSystem Design
Advanced hardware MPEG 4
Embedded O/S ROM
4/9/16 Camera input
Auto-sequence screen division and PIP/POP function.
Real time display
Recording : 120fps-NTSC (PAL 100fps)
4 CH audio recording and two way audio communication.
CD, DVD RW, USB external saving devices
Ethernet 10/100Mbps, RS-232C network support
Maximum 16 ports sensor input and 4 port alarm output
X-plex multitasking, recording, playback, backup and network.
STATIC, DHCP, PPPOE support
zGeneral Specifications
5
Page: NW-STA-5016/5009/5004 User Manual
User Manual
Firmware upgrade using network and USB port.
Remote upgrade using CMS
Free alarm (max 30secs), port alarm (max 120secs) recording
Watermarking
Private backup viewer
E-Map’s layout mapping
able to install maximum 4 HDD to save 2.5T
6
Page: NW-STA-5016/5009/5004 User Manual
User Manual
Chapter 3 General product operation
7
Page: NW-STA-5016/5009/5004 User Manual
User Manual
IV-STA-5016 (16ch)
13) POWER
System Power On/Off
1) VIDEO IN : BNC 16PORT
2) LOOP OUT(75ΩON/OFF)
3) AUDIO IN : 4 PORT 4) ALARM/SENSOR/RS-485
Connect Port for Sensor (16Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)
5) SPOT OUT
Sequence video display
through AV monitor
6) VIDEO OUT
Output video
through AV Monitor
7) S-VIDEO
Output video through
S-VIDEO comport
8) AUDIO OUT
Out put audio
by 1 port
12) RS-232
Connect Port for Program Debug.
11) VGA
Output Video to a Computer
Monitor by Connected
9) ETHERNET:
Port for Cross cable.
( Possible to Remote Surveillance.)
10) USB
USB port for use the USB memory backup
and USB update.
FRONT CASE Button Description
FRONT CASE Button Description
REAR PANEL I/O Description
REAR PANEL I/O Description
IV-STA-5016 (16ch)
division button
Search button
Rec. button
Menu button
Move button
USB Port: 2 PORT
USB port for use the USB
memory backup and USB
update
Records images
Shows the menu, moves to upper menus and complete setup
Moves to setup and menu. Operates PTZ camera
Numeric buttons
Applies setup details and select
channel
CD-ROM
Searches saved data
LED Indicator
SEQ. button
SPOT button
Setup SPOT monitor
PTZ. button
Play backward button
Stop button
Play forward button
Max. x 128 play forward.
Frame by frame play forward on playback
Stops playback and converts to surveillance mode
Max. x 128 play backward .
frame by frame play backward on data playback
Division rotating surveillance button
Operates Pan/Tilt camera
Setup Status, Audio, Backup, P/T/Z, SEQ, Log list
Function button
Indicate present system status information
Pause and playback the image
Pause button
1ch,4ch,9ch,16ch division button
8
Page: NW-STA-5016/5009/5004 User Manual
User Manual
13) POWER
System Power On/Off
1) VIDEO IN : BNC 9PORT
2) LOOP OUT:
Output video by BNC
9Port (75ΩAUTO)
3) AUDIO IN : 4 PORT 4) ALARM/SENSOR/RS-485
Connect Port for Sensor (9Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)
5) SPOT OUT
Sequence video display
through AV monitor
6) VIDEO OUT
Output video
through AV Monitor
7) S-VIDEO
Output video through
S-VIDEO comport
8) AUDIO OUT
Out put audio
by 1 port
12) RS-232
Connect Port for Program Debug.
11) VGA
Output Video to a Computer
Monitor by Connected
9) ETHERNET:
Port for Cross cable.
( Possible to Remote Surveillance.)
10) USB
USB port for use the USB memory backup
and USB update.
IV-STA-5009 (9ch)
FRONT CASE Button Description
FRONT CASE Button Description
REAR PANEL I/O Description
REAR PANEL I/O Description
IV-STA-5009 (9ch)
division button
Search button
Rec. button
Menu button
Move button
USB Port: 2 PORT
USB port for use the
USB memory backup
and USB update
Records images
Shows the menu, moves to upper menus and complete setup
Moves to setup and menu. Operates PTZ camera
Numeric buttons
Applies setup details and select
channel
CD-ROM
Searches saved data
LED Indicator
SEQ. button
SPOT button
Setup SPOT monitor
PTZ. button
Play backward button
Stop button
Play forward button
Max. x 128 play forward.
Frame by frame play forward on playback
Stops playback and converts to surveillance mode
Max. x 128 play backward .
frame by frame play backward on data playback
Division rotating surveillance button
Operates Pan/Tilt camera
Setup Status, Audio, Backup, P/T/Z, SEQ, Log list
Function button
Indicate present system status information
Pause and playback the image
Pause button
1ch,4ch,9ch division button
9
Page: NW-STA-5016/5009/5004 User Manual
User Manual
7) ETHERNET:
Port for Cross cable
( Possible to Remote
Surveillance.)
12) DC POWER Input
Power Supply by
DC12V Adaptor
1) VIDEO IN
Input video by
BNC 4PORT
2) LOOP OUT
Output video
by IV-STA-5004 :
BNC 4Port
(75ΩAUTO)
3) VIDEO OUT
Output video
through AV
Monitor
5) S-VIDEO
Output video
through S-VIDEO
comport
6) AUDIO IN
Input audio
by 4 Port
4) AUDIO OUT
Output audio
by 1 Port
8) RS-232
Connect Port for
Program Debug.
10) ALARM/SENSOR/RS-485
Connect Port for Sensor (4Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)
8) RS-232
Connect Port for
Program Debug.
11) POWER
System Power On/Off
IV-STA-5004 (4ch)
FRONT CASE Button Description
FRONT CASE Button Description
REAR PANEL I/O Description
REAR PANEL I/O Description
IV-STA-5004 (4ch)
division button
Play backward button
Stop button
Play forward button
Pause button
1ch,4ch division button
Search button
Searches saved data
Stops playback and converts to surveillance mode
Pause and playback the image
Menu button
Move button
Shows the menu, moves to upper menus and
complete setup
Moves to setup and menu. Operates PTZ camera
Setup Status, Audio, Backup, P/T/Z, SEQ, Log list
Function button
Max. x 128 play forward.
Frame by frame play forward on playback
USB Port: 2 PORT
USB port for use the
USB memory backup
and USB update
Max. x 128 play backward .
Frame by frame play backward on data playback
CD-ROM
PTZ. button
Operates Pan/Tilt camera
Rec. button
Records images
Numeric buttons
Applies setup details and select channel
LED Indicator
Indicate present system status information
10
Page: NW-STA-5016/5009/5004 User Manual
User Manual
Power on/off
zPower on
Press the power button at the back to be ‘ON’ to turn it on after connecting the power
cable.
zPower off
①press ‘Menu’ button [menu Æsystem Æshutdown]
②select ‘Shutdown’ and press ‘Enter’ button.
③select ‘OK’ button after the message “ system will shutdown”. Press ‘Enter’ button.
④press the power switch at the back to be ‘Off’.
System Login
zInput password
Input the password using number buttons at the password box.
☞
The default value is ‘0000’.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de DVR de Digital ID View
Digital ID View
Digital ID View 960H Series Instrucciones de funcionamiento
Digital ID View
Digital ID View SV+ Manual de usuario
Digital ID View
Digital ID View IV-411ECO Manual de usuario
Digital ID View
Digital ID View IV-MX4POENVR Manual de usuario
Digital ID View
Digital ID View 5700 Series Manual de usuario
Digital ID View
Digital ID View Real-time NETWORK VIDEO RECORDER Manual de usuario
