Digital-Ally DTM-600 Manual de usuario

860-00323-00 Rev E pg.1

DTM-600

Installation Guide

 
860-00323-00 Rev E pg.2 
 
Contents 
Overview…………………………. ...............................................................................................................................................3 
Wiring Diagram .................................................................................................................................................................4 
Floor Stand Option............................................................................................................................................................6 
1. Floor Stand…………………..................................................................................................................................................7 
2. Temp Sensor Option……...............................................................................................................................................11 
3. Forehead Temperature Sensor Option........................................................................................................................18 
Desktop Stand Option…….. .............................................................................................................................................24 
Wall Mount Option………… ..............................................................................................................................................25 
Terminal Configuration….. ..............................................................................................................................................27 
1. Device Startup and Login.....................................................................................................................................27 
2. OSD Configuration………………………………………………………………………………………………………………………………………….28 
3. Web Portal Configuration....................................................................................................................................30 
Contact Information……………...........................................................................................................................................33 
 
 
 

860-00323-00 Rev E pg.3

1. Overview

This document provides assembly instructions for the Floor Stand, Desk Stand, Wall Mount, and

Temperature Sensor options for the DTM-600.

The wiring diagram for the terminal and temp sensor apply to each of the three mounting options.

Floor Stand

Option

Desktop

Stand

Option

Wall

Mount

Option

Temp Sensor

Wall Mount

Option

Forehead

Sensor

Option

860-00323-00 Rev E pg.4

2. Wiring Diagram

Power and Temp Sensor

Wiring Kit

•Crimp Connectors

•Barrier Block

•Power Harness

•Wiring Guide

AC/DC Adapter

Power

Harness

+12vdc

AC Cable

RS485 P

Orange

RS485 N

Purple

RS485 N

Brown

RS485 P

Blue

+12vdc

Gnd

Ethernet

Network

Jack

Outlet

Crimp Connector

Solution

Terminal

Red OR

Black with stripe

Wrist Temp Sensor

Forehead Temp Sensor

Note:

The DTM-600 firmware

can differentiate between

the Wrist Temp Sensor

and Forehead Temp

Sensor. No additional

configuration is required.

860-00323-00 Rev E pg.5

Power

Harness

RS485 P

Orange

RS485 N

Brown

RS485 P

Blue

+12vdc

Gnd

Barrier Block

Solution

RS485 N

Purple

Ethernet

Terminal

Wrist Temp Sensor

Forehead Temp Sensor

Network

Jack

+12vdc

AC Cable

Outlet

AC/DC Adapter

Red OR

Black with stripe

Note:

The DTM-600 firmware

can differentiate between

the Wrist Temp Sensor

and Forehead Temp

Sensor. No additional

configuration is required.

860-00323-00 Rev E pg.6

Ground

3. Floor Stand Option

The mounting plate packaged with the DTM-600 terminal and the mounting bracket packaged with the Temperature

Sensor is mounted to the floor stand. Once the hardware is assembled, reference the wiring diagram to complete the

assembly.

The Floor Stand Base is an option to raise the Floor Stand.

The Extension Plate packaged with the Floor Stand is an option to raise the mounting height of the Terminal.

Floor Stand

Temp Sensor

Bracket Options

Temp Sensor

Mounting

Terminal

Mounting

Floor Stand

Covers

Final Assembly

Floor Stand

Base Option

Extension Plate

Option

Extension Plate Cover

placed over plate

860-00323-00 Rev E pg.7

3.1. Floor Stand

Remove the floor stand from the packaging.

For ease of assembly, place the floor stand on the floor or table face down.

Remove the terminal back plate by removing the 2 screws.

Remove the adapter back plate from the floor stand by removing the 2 screws.

terminal

back plate

adapter

back plate

base

back plate

860-00323-00 Rev E pg.8

Remove the AC adapter plate from the mid-way back plate by removing the 2 screws.

Note: bending the AC adapter plate as shown will allow the AC adapter to seat flush.

Seat the AC adapter on the adapter plate.

Seat the AC adapter plate atop the mid-way back plate and secure in place with 2 screws.

860-00323-00 Rev E pg.9

Plug the AC cable into the AC adapter.

Remove the back plate at the base of the floor stand.

Feed a network cable (not supplied) into the mid-way access cutout to the top and bottom of the floor stand.

Orient the AC adapter cables as shown below and carefully reseat the mid-way back plate.

860-00323-00 Rev E pg.10

Secure the mid-way back plate in place with 6 screws.

Orient the base plate to align the threaded studs to the floor stand.

Seat and thread the nuts to the threaded studs.

Orient the base back plate to allow the network cable and AC cable through the plate.

Secure the base back plate in place with 4 screws.

Set the floor stand on the side as shown with the temp sensor mounting holes facing up.

Otros manuales para DTM-600

Tabla de contenidos

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario