Digimerge DHU500 Manual de usuario

DHU500 SERIES MPEG4

NETWORKABLE DVR

Firmware Changes - Version 0906

English Version 1.0

Model: DHU500 Series

DHU504/DHU508/DHU516

DHU500 Series - Version 0906 Firmware Features

The following changes occur in the DHU500 unit after installing the new Firmware (version 0906):

• DVR MENU - Addition of the Auto Delete feature

• DVR MENU - Change to the Network Menu functionality:

zChanges to the IP Set Menu

zChanges to the DDNS Menu

• WEB CLIENT SOFTWARE - Addition of Remote Playback of Motion Events

• WEB CLIENT SOFTWARE - Change to the Remote System Setup menu

For additional information on the DHU500 unit and Firmware Updates, please visit us on the web

at http://www.digimerge.com

Installing New Firmware

DVR Firmware Upgrade – Local Upgrade

1. Download the latest firmware from the Digimerge website at

http://www.digimerge.com/cgi-bin/new_digimerge/product.cgi?uid=215

** Confirm that you have downloaded the correct firmware to match your DVR type (either the

DHU504 Firmware or the DHU508/516 Firmware) **

2. Extract the files from the ZIP archive. There will be 3 files:

• DHU504 Firmware

zApp-4ch_200609142137.bin

zCuboot-4ch.bin

zGuram-4ch_200609142137.gz

• DHU508/516 Firmware

zApp-8,16ch_200609142137.bin

zCuboot-8,16ch_060829.bin

zGuram-8,16ch_200609142137.gz

3. Copy the 3 extracted files to Memory Stick. Compatibility has been successfully tested with:

• Lexar Jumpdrive 128/256 MB

• Sandisk Mini Cruzer 128 MB

• Sandisk Cruzer Micro 256MB

4. Connect the Memory Stick to the USB 2.0 Port on the front panel of the DVR.

5. Enter the Menu by pressing the MENU button on the front panel of the DVR:

• Select the System Set Option

• Choose Program Update

zIf the Firmware is recognized by the DVR, the message “NEW PROGRAM FOUND” appears,

and the DVR unit will display a processing percentage.

zIf the Firmware is NOT recognized by the DVR, the message “NEW PROGRAM NOT

FOUND” appears, and processing will not continue.

6. Reboot the DVR once complete.

NOTE: This Firmware Upgrade will reset your DVR Unit to FACTORY DEFAULTS. All Settings

will be erased.

Installing New Firmware

DVR Firmware Upgrade – Remote Upgrade

1. Download the latest firmware from the Digimerge website at

http://www.digimerge.com/cgi-bin/new_digimerge/product.cgi?uid=215

** Confirm that you have downloaded the correct firmware to match your DVR type (either the

DHU504 Firmware or the DHU508/516 Firmware) **

2. On the local PC, navigate to the C:\DGClient\Upgrade folder. Extract the files from the ZIP

archive to this location. There will be 3 files:

• DHU504 Firmware

zApp-4ch_200609142137.bin

zCuboot-4ch.bin

zGuram-4ch_200609142137.gz

• DHU508/516 Firmware

zApp-8,16ch_200609142137.bin

zCuboot-8,16ch_060829.bin

zGuram-8,16ch_200609142137.gz

3. Start the Web Client Application, and remotely connect to the DVR Unit.

4. Select the ‘Firmware Upgrade’ option from the Setup Menu.

5. If the new firmware is detected, an Upgrade dialogue box will appear.

Select the Upgrade button.

6. A status indicator window appears during the upgrade process.

7. Once the update has completed, a success window

will appear. Press OK to the Upgrade window.

8. The DVR will need to be rebooted.

NOTE: This Firmware Upgrade will reset your DVR Unit to FACTORY DEFAULTS. All Settings

will be erased.

DVR MENU - Addition of the Auto Delete Feature Main Menu Tree

DVR MENU - Addition of the Auto Delete Feature

Main Menu Tree

Main Menu

Display Set

Recording Set

System Set

Network Set

Event Notification

Monitor Adjustment

Camera Covert

Camera Name

OSD ON/OFF

Set Display Sequence

Event Clear

Global Parameter

Normal Recording

Alarm Recording

Motion Recording

Schedule Recording

Recording ON/OFF

Basic

Disk Format

Password Change

Client Account

Program Update

Auto Delete

PTZ

DDNS Set

IP Set

E-Mail Registration

E-Mail Report

Notification Out

(4 CH Only)

(8/16 CH Only)

DVR MENU - Addition of the Auto Delete Feature System Set

DVR MENU - Addition of the Auto Delete Feature

System Set

Auto Delete Set

Sets the length of time that data will be held in the hard drive before it is deleted. Press the Kand

Lbuttons to highlight the AUTO DELETE SET option, and press the SEL button to access the

day setting. Use the Number pad to set the option between 0 days to 99 days or None. Choose

the Save & Exit option to accept the changes to this option. The default setting is None.

System Set

Basic

Disk Format

Password Change

Client Account

Program Update

PTZ (enter Password)

Auto Delete Set Period: 99 Days

Save & Exit

(8/16 CH Only)

DVR MENU - Change to the Network Set Menu Network Set

DVR MENU - Change to the Network Set Menu

Network Set

This submenu allows you to change the NETWORK options for the DVR unit. The options in the

DDNS Set menu control access to the DVR using the free DDNS server, and the options in the IP

Set section control local network settings for local access to the DVR.

Changes to the DDNS Set Menu

The options in the DDNS Set menu allow the DVR unit to be accessed remotely using the Free

DDNS Server and the internet. All information will need to be manually entered based on

information from the free DDNS Setup (see page 35 for details).Set the USE DYNAMIC IP option

to YES if you will be using the Free DNS Website service to connect to your DVR.

• DDNS: Press the Kand Lbuttons to highlight,

and press the SEL button to set to NO/YES.

• DOMAIN NAME: Press the Kand Lbuttons to

highlight, and press the SEL button to set to

enter setup. Use the Numbers and Letters on

the front panel of the DVR to set the Domain

Name (i.e. To enter the Domain Name

DHU504.digimerge.net, just enter DHU504)

• USER NAME: Press the Kand Lbuttons to highlight, and press the SEL button to set to enter

setup. Use the Numbers and Letters on the front panel of the DVR to set the Domain Name.

• PASSWORD: Press the Kand Lbuttons to highlight, and press the SEL button to set to enter

setup. Use the Numbers and Letters on the front panel of the DVR to set the Domain Name.

• DNS STATUS CHECK: Connects to the remote DNS Server to check the Status. Press the

Kand Lbuttons to highlight, and press the SEL button to test the connection:

zChecking DDNS NOW. Please wait... it may take a few minutes

zA Status message will appear indicating a PASS or FAIL on the connection:

zDDNS Status Check: PASS / FAIL

• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the Kand L

buttons to highlight, and press the SEL button to accept the changes.

Network Set DDNS Set

IP Set

DDNS:

Domain Name:

User Name:

Password:

DDNS Status Check

Save & Exit

YES

########

DVR MENU - Change to the Network Set Menu Network Set

Changes to the IP Set Menu

The options in the IP Set menu control the local network setup for the Unit. See 45 for additional

network setup instructions.

• DHCP: Press the Kand Lbuttons to highlight,

and press the ←→ buttons to set to NO/YES.

Set this option to YES to allow the unit to get

Network information from the Router; set this

option to NO if information will be manually

assigned to the DVR unit.

• IP ADDRESS: Press the Kand Lbuttons to

highlight, and press the SEL button to enter

setup. Use the Numbers on the front panel of

the DVR to set the IP address.

• GATEWAY: Press the Kand Lbuttons to

highlight, and press the SEL button to set to

enter setup. Use the Numbers on the front panel

of the DVR to set the Gateway address.

• NETMASK: Press the Kand Lbuttons to highlight, and press the SEL button to set to enter

setup. Use the Numbers on the front panel of the DVR to set the Net Mask.

• DNS SERVER: Press the Kand Lbuttons to highlight, and press the SEL button to enter

setup. Use the Numbers on the front panel of the DVR to set the DNS Server address.

• DVR PORT: Press the Kand Lbuttons to highlight, and press the SEL button to enter setup.

Use the Numbers on the front panel of the DVR to set the DVR Port to 2000 (default) or any

other port desired between 2001 ~ 65535 that is not currently in use.

• WEBSERVER PORT: Press the Kand Lbuttons to highlight, and press the SEL button to

enter setup. Use the Numbers on the front panel of the DVR to set the Webserver Port to 0080.

• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the Kand L

buttons to highlight, and press the SEL button to accept the changes.

DHCP:

IP Address:

Gateway:

Netmask:

DNS Server:

DVR Port:

Webserver Port:

Save & Exit

###.###.###.###

2000

0080

WEB CLIENT SOFTWARE - Addition of Remote Playback of Motion Events Detail Tabs

WEB CLIENT SOFTWARE - Addition of Remote Playback of

Motion Events

Detail Tabs

Displays system information:

1. Log - Shows login, logout and connection details.

2. Event - Displays camera event messages: Motion, Alarm, Sensor and Video Loss.

NOTE: Double clicking on a MOTION event will display a list of all events, and double clicking on

an event will start the playback of the previously recorded video.

3. Info - Displays system information retrieved from the DVR.

4. Status - Indicates the status of the DVR and Cameras.

WEB CLIENT SOFTWARE - Change to the Remote Setup / System Setup Menu Remote Setup - System

WEB CLIENT SOFTWARE - Change to the Remote Setup /

System Setup Menu

Remote Setup - System Set Tab

The System Set controls some of the general functionality of the remote DVR:

• User Accounts - Add up to 5 user accounts for remote access to the DVR unit.

• PTZ Camera Model Setup - Configuration for PTZ enabled cameras.

• Sensor IN Setup - Configuration for any external sensor devices connected to the remote

DVR (such as Door or Window Sensors) to a maximum of 4.

• Alarm OUT Setup - Configuration for Alarm type devices (maximum of 4).

• Auto Delete Mode - Sets the time period for Auto Delete (how long the DVR unit will retain

recorded video data). This dropdown can be set between 0 Days to 99 Days, or to None.

• PTZ Controller - Settings for the PTZ Controller

zID: Set the ID Dropdown between 1 and 6,

zPTZ Model: Only option available is TB-CN SERIES

zBaud Rate: Set to 2400, 4800 or 9600

Otros manuales para DHU500

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de DVR de Digimerge

Digimerge

Digimerge DGR100 Manual de instrucciones

Digimerge

Digimerge DHU504 Manual de instrucciones

Digimerge

Digimerge Pentaplex Network DVR Manual de usuario

Digimerge

Digimerge DHU500 Manual de usuario

Digimerge

Digimerge DHU500R Series Manual de usuario

Digimerge

Digimerge DGR109 Manual de instrucciones

Digimerge

Digimerge VCE400 Series Manual de usuario

Digimerge

Digimerge DHT309 Manual de usuario

Digimerge

Digimerge DHU500 Manual de usuario

Digimerge

Digimerge DH200+ Series Manual de usuario

Digimerge

Digimerge D300 SERIES Manual de usuario

Digimerge

Digimerge VB300 SERIES Manual de usuario

Digimerge

Digimerge VCD304161 Manual de usuario

Digimerge

Digimerge VCE304161 Manual de usuario

Digimerge

Digimerge DHT304 Manual de instrucciones

Digimerge

Digimerge DH230 Series Manual de usuario

Digimerge

Digimerge D300 SERIES Manual de usuario

Digimerge

Digimerge DHU500 Manual de usuario

Digimerge

Digimerge DGR104 Manual de instrucciones

Digimerge

Digimerge DGN216 Manual de instrucciones

Digimerge

Digimerge D204 Series Manual de usuario

Digimerge

Digimerge DHU104 Series Manual de usuario

Digimerge

Digimerge DH200+R Series Manual de usuario

Digimerge

Digimerge DH200 Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario