Digilock Curve Manual de usuario

PRODUCT GUIDE

Keypad | Basic & Advanced

SHARED & ASSIGNED USE FUNCTIONALITY

Front Unit Deadbolt Rear Unit

Cover Plate

½" (12.7 mm)

Deadbolt

Cover Plate Screw

Connection Options

Cable

Aspire locks with a keypad interface are operated by a 4-7 digit User Code or by an ADA compliant User Key. Manager Keys provide

management access and external power. Programming is accomplished via a Programming Key unique to the lock system. An optional

mobile application tool simplifies lock system management and provides audit trail for locks with advanced functionality.

1Up to 6 Manager Keys may be programmed to each lock. If managed with the optional Mobile App, up to 250 Manager Keys may be programmed to each lock.

2One (1) Programming Key allowed per lock system.

3Up to 20 user credentials may be assigned to each lock. If managed with the optional Mobile App, up to 250 user credentials may be assigned to each lock.

LED Usage Indicator

Shared Use

Assigned Use

Standard

C Button Key Button

Key Slot

Pull Handle

Alpha Numeric

Keypad

User Key Manager Key1Programming Key2

Operates the lock •••

Overrides user access • •

Allows management inspection • •

Provides external power • •

Programs Manager Keys to the lock •

Assigns user credentials3(in assigned use functionality) •

Sets lock functionality •

Key Insertion

KEYS

LOCK PARTS

PRODUCT GUIDE

Keypad | Basic & Advanced

Locks are shipped with factory default settings (operates by pressing = `). Each lock must be setup to operate with a Programming

Key and Manager Key(s).

Express Register Manager Keys

The Programming Key can quickly program multiple locks to operate with the same Manager Keys.

Go to a lock already programmed to

operate with the Manager Keys.

Press = ` 61 `.

The LED will turn on.

Insert the Programming Key.

A two-tone beep will be heard and the

LED will turn off.

Insert the Programming Key to program

each lock to operate with the same

Manager Keys.

Two sets of two-tone beeps will be heard

and the LED will flash twice to indicate

successful programming.

End express registration mode.*

Go to any programmed lock.

Press = `.

Then insert the Programming Key. To return the bolt to the original position,

press = `, then insert the Programming

Key.

*The Programming Key will continue to function in express registration mode until it is used to operate a lock.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn on.

Insert one Manager Key at a

time.

A two-tone beep will be

heard for each Manager Key

programmed.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Repeat previous steps for each

lock or follow instructions to

Express Register Manager Keys

to setup all locks.

1324

SETUP

PROGRAMMING INSTRUCTIONS

PRODUCT GUIDE

Keypad | Basic & Advanced

The locks must be reprogrammed to prevent lost/stolen keys from operating a lock.

Add Manager Keys

Manager Keys can be programmed to the locks at any time.

Note the order or serial number (found on the lock’s rear unit). Contact Digilock Support to purchase a replacement

Programming Key.

Collect all remaining and any

new Manager Keys.

Go to any lock operated by the

lost/stolen Manager Keys.

Press = ` 55 `.

The LED will turn on.

Insert the Programming Key.

A two-tone beep will be heard.

Reinsert the Programming Key

again. Three sets of two-tone

beeps will be heard and the

LED will turn off.

All previously programmed

Manager Keys will be erased.

Follow instructions to Add

Manager Keys to program the

remaining and replacement

Manager Keys to the locks.

Go to a lock requiring

additional Manager Keys.

Press = ` 55 `.

The LED will turn on.

Insert the Programming Key.

A two-tone beep will be heard.

Insert each additional Manager

Key one at a time.

A two-beep will be heard

for each Manager Key

programmed.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Repeat above steps for each

lock or follow instructions to

Express Register Manager Keys

to quickly program multiple

locks to operate with the same

Manager Keys.

To Replace the Programming Key

To Replace the Manager Keys

1 2

PROGRAMMING INSTRUCTIONS - ADDING KEYS

PROGRAMMING INSTRUCTIONS - REPLACING KEYS

PRODUCT GUIDE

Keypad | Basic & Advanced

Each lock can be set for either shared or assigned use functionality. Press =to check functionality. If in shared use, LED is red. If in

assigned use, LED is green.

Note: For assigned use functionality only

Make sure that the lock is set for assigned use functionality (a green LED will flash when =is pressed). Up to 20 user credentials (User

Codes and/or User Keys) may be assigned to each lock. Repeat the steps below for each credential that needs to be assigned to the

lock(s).

Assign User Keys

Assign User Codes

Press = ` 55 `.

The LED will turn on.

Insert a valid Manager Key.

A two-tone beep will be heard.

Press =[new 4-7 digit code] `.

A two-tone beep will be heard.

Press =[same 4-7 digit code] `.

Two sets of two-tone beeps will

be heard and the LED will turn

off.

Press = ` 55 `.

The LED will turn on.

Insert a valid Manager Key.

A two-tone beep will be heard.

Insert a User Key.

Two sets of two-tone beeps will be heard

and the LED will turn off.

To Set for Assigned Use To Set for Shared Use

Press = ` 65 `.

The red LED will turn on

Insert the Programming Key.

A two-tone beep will be heard

and the green LED will flash

once..

Press

= ` 56 `.

The green LED will turn on.

Insert the Programming Key.

A two-tone beep will be heard

and the red LED will flash once.

123

31 2 4

11 2 2

PROGRAMMING INSTRUCTIONS - SET LOCK FUNCTIONALITY

PROGRAMMING INSTRUCTIONS - ASSIGN USER CREDENTIALS

PRODUCT GUIDE

Keypad | Basic & Advanced

094361

28643

139567

8112548

5379

6924

Express Register User Credentials and Manager Keys

Make sure the lock is set for assigned use functionality (a green LED will flash when =is pressed). The Programming Key can quickly

program multiple locks to operate with the same user credentials and Manager Keys.

Go to a lock already

programmed to operate

with the user credentials and

Manager Keys.

Press = ` 66 `. The

LED will turn on.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Insert the Programming Key to

program each lock to operate

with the same user credentials

and Manager Keys.

Two sets of two-tone beeps will

be heard and the LED will flash

twice to indicate successful

programming.

End express registration mode.*

Go to any programmed lock,

press = `, then insert the

Programming Key.

Press = `, then insert the

Programming Key again to

return the bolt to the original

position.

*The Programming Key will continue to function in express registration mode until it is used to operate a lock.

Make sure the lock is in assigned use functionality (a green LED will flash when =is pressed). The locks must be reprogrammed to

remove user credentials from operating a lock.

Remove User Credentials

Collect all remaining and replacement user credentials

(User Codes and User Keys). Press = ` 55 `.

The LED will turn on.

Insert a valid Manager Key.

A two-tone beep will be heard.

Insert the Manager Key again.

Three sets of two-tone beeps will be heard

and the LED will turn off.

All previously assigned user credentials

will be removed.

Follow Assign User Credentials

instructions to assign the remaining and

replacement user credentials.

1 2 4

3 4 5

PROGRAMMING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY

PRODUCT GUIDE

Keypad | Basic & Advanced

Replace an Assigned User Code with a New User Code

Replace an Assigned User Key with a New User Code

Press = `, then insert a valid Manager Key.

A two-tone beep will be heard and the

LED will turn on.

Press =[assigned user code] `.

A two-tone beep will be heard.

Press: =[new 4-7 digit user code] `

=[the same 4-7 digit user code] `.

Two sets of two-tone beeps will be heard

and the LED will turn off.

Press = `, then insert a valid Manager Key.

A two-tone beep will be heard and the

LED will turn on.

Insert an assigned User Key.

A two-tone beep will be heard.

Press: =[new 4-7 digit user code] `

=[the same 4-7 digit user code] `.

Two sets of two-tone beeps will be heard

and the LED will turn off.

Press = `, then insert a valid Manager Key.

A two-tone beep will be heard and the

LED will turn on.

Press =[assigned user code] `.

A two-tone beep will be heard.

Insert a new User Key.

Two sets of two-tone beeps will be heard

and the LED will turn off.

Press = `, then insert a valid Manager Key.

A two-tone beep will be heard and the

LED will turn on.

Insert an assigned User Key.

A two-tone beep will be heard.

Insert a new User Key.

Two sets of two-tone beeps will be heard

and the LED will turn off.

Replace an Assigned User Code with a New User Key

Replace an Assigned User Key with a New User Key

Note: If the same credential needs to be replaced on multiple locks, please see instructions for Express Register User Credentials and Manager Keys.

PROGRAMMING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY

PRODUCT GUIDE

Keypad | Basic & Advanced

To Turn Off the LED Usage Indicator To Turn On the LED Usage Indicator

To Turn Off Auto Unlock

Press =` 92 `.

The LED will flash.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Press

=` 91 `.

The LED will flash.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Press =` 94 `.

The LED will flash.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

LED Usage Indicator

Auto Unlock

When in shared use functionality, each lock can be programmed to have the LED flash or not flash while the lock is in use. The default

setting is ON (red LED flashes while lock is in use).

When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF

(does not auto unlock).

To Turn On Auto Unlock

Press =` 95 `.

The LED will flash.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will flash.

Enter the number of hours from:

1 - 9 9, then press `.

Two sets of two-tone beeps will

be heard and the LED will turn off.

For example: Press 8 ` to set

the lock to auto unlock after 8

hours.

31 2 4

SET ADDITIONAL LOCK FEATURES (FOR SHARED USE FUNCTIONALITY ONLY)

PRODUCT GUIDE

Keypad | Basic & Advanced

In shared use functionality, the user enters any 4-7 digit User Code or inserts any User Key to lock and the same User Code or User Key

to unlock. Once unlocked, the lock is available for a different user.

*After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).

**If a valid Manager Key or the Programming Key is used to relock, the previous user credential will continue to operate the lock.

Operate with a User Code Operate with a User Key

Operate with a Manager Key Operate with the Programming Key

Override with a Manager Key Override with the Programming Key

Lock

Unlock

Lock

Unlock

Relock

Unlock

Relock

Press =[any 4-7 digit code] `.Press =[the same 4-7 digit code] `.*

Insert a valid Manager Key Insert a valid Manager Key

Insert a valid Manager Key Insert a valid Manager Key**

Insert User Key. Insert the same User Key.

Press = `, then insert the

Programming Key.

Press = `, then insert the

Programming Key.

Press = `, then insert the

Programming Key.

Press = `, then insert the

Programming Key.**

OPERATING INSTRUCTIONS - IN SHARED USE FUNCTIONALITY

OVERRIDING INSTRUCTIONS - IN SHARED USE FUNCTIONALITY

PRODUCT GUIDE

Keypad | Basic & Advanced

In assigned use functionality, users operate the lock with their assigned user credential (either a User Code or a User Key).

*After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).

Operate with an Assigned User Code Operate with an Assigned User Key

Operate with a Manager Key Operate with a Programming Key

Unlock

Relock

Press =[an assigned 4-7 digit code] `.Press =[an assigned 4-7 digit code] `*

or Press = ` `.

Insert a valid Manager Key. Insert a valid Manager Key

or press = ` `.

Insert an assigned User Key. Insert an assigned User Key

or press = ` `.

Press = `, then insert the

Programming Key.

Press = ` then insert the

Programming Key

or press = ` `.

OPERATING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY

PRODUCT GUIDE

Keypad | Basic & Advanced

POWER JUMPING A LOCK WITH A MANAGER KEY

Insert and leave a valid Manager Key into the key slot until the

lock operates.

Open the door.

See Lock Battery Replacement instructions.

CAUTION: Risk of explosion or leakage if battery is replaced by an incorrect type, mixed with a different battery type, or inserted

backwards. Replace all batteries of a set at the same time. Be sure to insert batteries with correct polarities. Remove exhausted batteries

from product promptly and dispose of used batteries according to the battery manufacturer’s instructions.

Remove the 2 screws from the cover plate with a #1 Phillips

screw driver.

Slide battery cover plate back and lift up to expose the batteries.

Manager and Programming Key Battery Replacement

Remove the batteries from the housing. Replace with four

premium alkaline AAA batteries.

Replace the cover plate and secure with the screws.

Otros manuales para Curve

Tabla de contenidos

Otros manuales de Cerrar de Digilock

Digilock

Digilock Numeris Versa Standard Manual de usuario

Digilock

Digilock ADA User Key Manual del propietario

Digilock

Digilock DK-APS 4G Instrucciones de funcionamiento

Digilock

Digilock ATS Manual de usuario

Digilock

Digilock NEXT Sola3 Keypad Manual de usuario

Digilock

Digilock numeris aspire Manual de usuario

Digilock

Digilock Lockup M Manual de usuario

Digilock

Digilock Next Mech Manual de usuario

Digilock

Digilock Shared Use RFID Camlock Manual de usuario

Digilock

Digilock DAR1-ATS1 Manual de usuario

Digilock

Digilock numeris aspire Manual de usuario

Digilock

Digilock NEXT Sola3 Keypad Manual de usuario

Digilock

Digilock DL330BT Manual de usuario

Digilock

Digilock DCR1-APV1 Manual de usuario

Digilock

Digilock NEXT Sola3 Touch RFID Manual de usuario

Digilock

Digilock DCK1-APV1 Manual de usuario

Digilock

Digilock Numeris Versa Mini Manual de usuario

Digilock

Digilock Numeris Versa Manual de usuario

Digilock

Digilock DAR1-APV1 Manual de usuario

Digilock

Digilock DAK1-APS1 Manual de usuario

Digilock

Digilock Assigned Use RFID Camlock Manual de usuario

Digilock

Digilock NEXTLOCK CUE Series Manual de usuario

Digilock

Digilock DCR1-ATV1 Manual de usuario

Digilock

Digilock Next Mech Dial Combo Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario