Digiever DS-1200 Series Manual de usuario

Network Video Recorder

Quick Installation Guide

DS-1200 Series

1.2.0.6

Information in this document is subject to change without notice.

 
1 
 
Table of Contents 
Pre-installation Notice.................................................................................................. 3 
Remote PC System Requirements.............................................................................. 3 
Package Contents....................................................................................................... 5 
Hardware Description.................................................................................................. 6 
Power on and connecting............................................................................................ 9 
Connection to DIGIEVER NVR.................................................................................... 9 
Quick Configuration....................................................................................................13 
Appendix 
LED Indicators at Front Panel ..........................................................................................14 
LED Indicators at Rear Panel...........................................................................................15 
 
 

Quick Installation Guide

Thank you for choosing DIGIEVER NVR Network Video Recorder. The following quick

guide will lead you to complete the installation and configuration of the NVR. Please read

the following description carefully.

Safety Precautions

The following safety precautions will increase the life of the NVR. Follow all precautions and

instructions.

Electrical Safety

Unplug this product from the power source before cleaning.

Use only the bundled power adapter. Using other power adapters may damage your device.

Ensure that you plug the power adapter to the correct power input rating. Check the label on

the power adapter for the power rating.

Operation Safety

 DO NOT place this product in a location where it may get wet.

 Place this product on a flat and stable surface.

 Use this product in environments with an ambient temperature between 0°C and 40°C.

 DO NOT block the air vents on the case of this product. Always provide proper ventilation

for this product.

 DO NOT insert any object or spill liquid into the air vents. If you encounter technical

problems with this product, contact a qualified service technician or your retailer. DO NOT

attempt to repair this product yourself.

DO NOT throw this product in municipal waste.

This product has been designed to enable proper reuse of parts

and recycling. This symbol of the crossed out wheeled bin

indicates that the product (electrical and electronic equipment)

should not be placed in municipal waste. Check local regulations

for disposal of electronic products.

Pre-installation Notice

Please make sure the following items are prepared for installing DIGIEVER NVR

DS-1200 Series.

Network connection

Configuration of network cameras

Compatibility of network cameras

Computer for configuring DIGIEVER NVR

1-2 hard disks

Compatibility of hard disk with DIGIEVER NVR

1 slotted screwdriver and 1 Philips screwdriver

*For camera compatibility, please check our website http://www.digiever.com/support/compatibility.php

Remote PC System Requirements

The following are minimum system requirements for a personal computer to operate the

DIGIEVER NVR in better performance:

Operating System

Microsoft®Windows®Vista/7/8/10/11 (32-bit and 64-bit)

Browsers in Windows OS

Microsoft® Internet Explorer 10.0 or above, Microsoft® Edge 44.18362.387.0

(EdgeHTML 18.18362) or above, Firefox 51.0.1 or above, Opera 43.0.2 or above

CPU

Intel®i7 CPU or above

Network

Minimum 10/100/1000 Ethernet (Gigabit Ethernet is recommended)

Note: It is suggested to connect cameras and NVR with Gigabit switch.

Memory

16G or above

Graphics Adapter

AGP or PCI-Express, minimum 1024 × 768, 16bit colors, 1G memory or above

Note: It is highly recommended to use a graphics adaptor which provides

higher than resolutions 1024 x 768 in order to experience the full benefits of the

software.

Make sure the display DPI setting is set to default at 96DPI

To set DPI value, right-click on desktop, choose “Settings” tab >>

“Advanced” >> “General.”

CD-ROM Drive

It is necessary to read the operating instructions in the provided CD-ROM.

Adobe Reader

It is necessary to read the operating instructions in the provided CD-ROM.

The audio function will not work if a sound card is not installed in the PC. Audio may be

interrupted depending on network traffic.

Package Contents

 NVR (Network Video Recorder)

 Power Cord

 Power Adapter

 RJ45 Network Cable

 Screws for use with 2.5” HDD

 Product CD

Hardware Description

Front View Rear View Front Cover

1. Power button

2. Power LED indicator

3. System Status LED Indicator

4. Network LED Indicator

5. USB LED indicator

6. HDD LED Indicator

7. One-Touch Backup button

8. 1 x USB 3.2 Gen 1x1 (for auto video backup)

9. HDD1

10. HDD2

11. 2 x USB 3.2 Gen 1x1

12. 1 x HDMI 2.0a

13. 2 x 2.5 Gigabit RJ45 Port

14. Reset Button

15. DC Input

16. K-lock

Hard Disk Installation

Please follow the steps as illustrated below to install the hard disk:

①Remove the front panel as shown in the image below

②Using the latch, gently pull the disk tray out of the disk bay.

③Mount the hard disk to the disk tray.

(1) 3.5-inch hard disks:

Please remove the two rails on both sides of the hard drive tray. Place the hard

drive into the tray, align and insert the rails to secure the hard drive and insert it

into the NVR

(2) 2.5-inch hard disks and SSD hard disks:

Please remove the two rails on both sides of the hard drive tray. Align the hard

drive with the 4 holes labeled 2.5" with the SATA connector facing outward.

While maintaining a grip on the hard drive and tray, turn the tray upside down

and secure the drive with four included M3 screws as demonstrated below.

④Slide the disk tray onto the rails of the disk bay. Using the latch, gently push the

disk tray into the disk bay.

⑤Secure the disk tray in place by pushing down on the latch. The latch should close

easily and snap in with an audible ‘click’. Please make sure that the disk tray is

pushed all the way into the disk bay before attempting to secure the latch.

⑥Return the front panel.

Power on and connecting

①Connect the NVR to its power supply and LAN cable to your router, switch or hub

using and Ethernet cable.

②Press the power button and there is a beep to indicate the NVR is in booting

process. Please wait for minutes until NVR beeps another time. The installation of

NVR is complete right now.

Connection to DIGIEVER NVR

Please insert the product CD-ROM on a PC to install NVR Search and NVR Decoder.

Finally, you can start Quick Configuration on a web page.

Install NVR Search for finding NVR in the network

Install NVR Decoder

Connect to the configured NVR, download and install NVR-Client.exe

①Install NVR Search

Please execute the product CD and click “Install NVR Search.”

Tabla de contenidos

Otros manuales de Hardware de red de Digiever

Digiever

Digiever DS-4100-RM Manual de usuario

Digiever

Digiever DS-8500-RM UHD Series Manual de usuario

Digiever

Digiever DS-8209-RM Pro Manual de usuario

Digiever

Digiever DS-8200-RM Pro Series Manual de usuario

Digiever

Digiever DS-16500-RM Pro+ Series Manual de usuario

Digiever

Digiever DS-8200-SRM Pro+ Series Manual de usuario

Digiever

Digiever DS-2100 UHD Series Manual de usuario

Digiever

Digiever DS-8300-RM Pro+ Series Manual de usuario

Digiever

Digiever DS-4100 UHD Series Manual de usuario

Digiever

Digiever DS-2000 Series Manual de usuario

Digiever

Digiever DS-16400-RM Pro+ Series Manual de usuario

Digiever

Digiever DS-4200-RM Pro Series Manual de usuario

Digiever

Digiever DS-8400-RM Pro+ Series Manual de usuario

Digiever

Digiever DS-8400-SRM Pro+ Series Manual de usuario

Digiever

Digiever DS-4300-RM Pro+ Series Manual de usuario

Digiever

Digiever DS-2000 Series Manual de usuario

Digiever

Digiever DS-2005 Series Manual de usuario

Digiever

Digiever DS-16300-RM Pro+ Series Manual de usuario

Digiever

Digiever DS-8300-SRM Pro+ Series Manual de usuario

Digiever

Digiever DS-2005 Series Manual de usuario

Digiever

Digiever DS-2200 UHD Series Manual de usuario

Digiever

Digiever DS-2009 Series Manual de usuario

Digiever

Digiever DS-8212-RM Pro Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario