DIEBOLD NIXDORF K-two Manual de usuario

K-two

User manual

March 2019

01750312066B

All rights, including rights of translation, reproduction by printing, copying or similar methods,

in part or in whole, are reserved.

the grant of a patent or the registration of a utility model. Subject to availability and technical

modifications. All names of hardware and software products mentioned in this manual are

trade names and/or trademarks of their respective manufactures.

Contents

1Scope of document......................................................................................................... 1

1.1 Symbols................................................................................................................ 1

2Further documentation.................................................................................................... 2

3Warranty......................................................................................................................... 2

4Important notes............................................................................................................... 3

4.1 Connecting peripherals ......................................................................................... 4

4.2 Note concerning the laser...................................................................................... 4

5Scope of delivery ............................................................................................................ 5

5.1 Serial number / Ratings......................................................................................... 5

6ESD (Electrostatic Sensitive Devices)............................................................................. 6

7Components ................................................................................................................... 7

7.1 Exterior view.......................................................................................................... 7

7.2 Interior view........................................................................................................... 8

8Opening the K-two.......................................................................................................... 9

9Starting/shutting down the device ..................................................................................10

9.1 Shutting down the system ....................................................................................10

9.2 Restarting the system after shutdown...................................................................10

10 Disconnecting the kiosk from power supply ................................................................11

11 TH230+.......................................................................................................................12

11.1 Safety notes.........................................................................................................12

11.2 Control panel........................................................................................................13

11.3 Changing the paper roll........................................................................................15

11.4 Cleaning the print head ........................................................................................16

12 Cleaning instructions ..................................................................................................18

12.1 General details.....................................................................................................18

12.2 Maintenance and service......................................................................................18

12.3 Housing................................................................................................................18

12.4 Permitted cleaning materials ................................................................................19

13 Technical data............................................................................................................20

13.1 System.................................................................................................................20

13.2 Environmental requirements.................................................................................20

13.3 Electrical characteritics of the power supply.........................................................21

13.4 Device conditions.................................................................................................21

13.5 Noise emission in acc. withEN 27779...................................................................21

13.6 ACO Kiosk PC......................................................................................................21

13.7 Scanner Honeywell CF3680.................................................................................22

13.8 RFID/NFC Modul..................................................................................................23

13.9 Displays 22” (TEM-22F-PUG-15-C), 27“ (TEF-27F-PUK-15A-C), 32” (TDS-32C-

PUK-15A-C)......................................................................................................................23

14 Dimensions of K-two...................................................................................................24

14.1 K-two with 22”-display..........................................................................................24

14.2 K-two with 27”-display..........................................................................................25

15 Certificates..................................................................................................................26

16 Recycling....................................................................................................................27

K-two User Manual

1 Scope of document

Responsibility for all technical and special requirements for installing the K-two lies with the

customer.

The K-two may only be installed and connected by employees with the appropriate technical

training.

The safety instructions given in this document must be strictly followed when handling the K-

two.

1.1 Symbols

DANGER

This warning note describes a hazard with a high degree of risk, which, if not

avoided, will result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk,

which, if not avoided, will result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk, which, if not

avoided, will result in death or grave bodily injury.

NOTICE

This note provides application tips and information that help prevent errors

and material damage.

User Manual K-two

2 Further documentation

Product Document Type Order Number

TH230+ Printer User Manual 01750196338C

3 Warranty

Diebold Nixdorf generally guarantees a warranty of 12 months beginning on the date of

delivery. This warranty covers all defects that occur despite normal use of the product.

Defects due to

•improper or inadequate maintenance,

•improper use or unauthorized modification of the product or

•an unsuitable installation location or inadequate environment

are not covered by the warranty.

Other information in relation to regulations can be found in your contract.

None of the wear parts of the product is included in the warranty. Details in relation to the

warranty provisions can be found in your contract documentation.

K-two User Manual

4 Important notes

Devices supplied by Diebold Nixdorf comply with the relevant safety regulations for data

processing and information technology equipment, including electrical office equipment for

use within an office environment.

CAUTION

Whenever work of any kind is carried out on the device, as well as when

data cables are plugged in and unplugged, the device must be completely

disconnected from the power supply.

•The sockets of the house installation must be easily accessible.

•The device may only be repaired by authorized technicians.

•Unauthorized opening of the housing or inexpert repairs can result not only in

considerable personal injury, but will also invalidate your warranty and liability protection.

•Always consult the available documentation before performing any work on this device.

•If this device is brought from a cold environment into a heated operating room,

condensation may occur. The device must be completely dry before being operated. An

acclimatization period of at least two hours must therefore be observed.

•Always lay the supply leads and cables in such a way that they cannot be stepped on or

tripped over.

•Exchange damaged cables immediately.

•In order to completely disconnect the device from the power supply, use the circuit

breaker in the fuse box or building installation.

•Make sure that no objects (such as paper clips) can reach the interior of the device, since

electrical shocks or short-circuits could result.

•To avoid overheating, ensure that the K-two is adequately ventilated.

•Data cables should not be plugged in or unplugged during a storm.

•Keep the device away from vibrations, dust, humidity and heat.

•Ensure that any used parts are disposed of in an environmentally-friendly manner.

•In case of an accident (such as damaged housing, entry of liquids or foreign objects),

switch off the device and use the circuit breaker to completely disconnect the device from

the power supply.

User Manual K-two

•The device and other information technology hardware should only be connected to a

power supply system using a separate protective earth (PE) wire. This type of power

supply system is referred to as a TN-S network. Do not use PEN conductors.

Also follow the recommendations set out in DIN VDE 0100 Part 540, Appendix C2 as well

as EN50174-2, Section 5.4.3 (www.DIN.en). This will help avoid malfunctions.

•National Electrical Code ANSI/NFPA 70 (NEC)

•Canadian Electrical Code, part I, CSA C22.1 (CE Code)

•The device should only be transported in its original packaging (to protect it against shock

and impact).

•Always keep the ventilation slots free of obstruction to ensure adequate air circulation

and avoid overheating.

•If the device comes with a lithium battery, make sure the battery is replaced by an

equivalent type. Otherwise there is a risk of explosion! Lithium batteries must only be

replaced by identical types or by other types recommended by the manufacturer.

•The batteries must be disposed of according to local regulations for the disposal of

hazardous waste.

4.1 Connecting peripherals

Devices should only be connected using shielded cables in order to ensure compliance with

international regulations and standards for radiation emissions and to achieve a high

immunity to external interference.

4.2 Note concerning the laser

The barcode reader contains a LED, which is classified in accordance with LASER Class 1.

Otros manuales para K-two

Tabla de contenidos

Manuales populares de Accesorios para proyectores de otras marcas

Optoma

Optoma BX-AL133B Manual de usuario

PEERLESS

PEERLESS PE 1120 Guía

Osram

Osram SIRIUS HRI Series Manual

Presentation Switchers

Presentation Switchers PS111 Manual de usuario

Kramer

Kramer VIA GO Manual de usuario

Yamaha

Yamaha PJL-112 Manual de lista de piezas

Swedstyle

Swedstyle CL23AA02ZA25E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 236CB Manual del propietario

Epson

Epson BrightLink 475Wi Manual de usuario

Acer

Acer WP100 Manual de usuario

i3 i3board Manual de usuario

CHIEF

CHIEF HB-43E Manual de usuario

Biamp

Biamp Modena Hub Manual de servicio

NEC

NEC MP10RX Manual de usuario

Panamorph

Panamorph DCR-S3 Manual de usuario

Exact solutions

Exact solutions FRAME-EVO-P10 Manual de usuario

CHIEF

CHIEF VCM103S Manual de usuario

InFocus

InFocus LP70+ Guía