Diamond Products CSH24 Manual de usuario
CHAIN SAW
OPERATOR'S
MANUAL
MODEL
CSH24
March 2020
Part# 1801446
Table of Contents
Description Page No.
1. Product description
Main Components...........................................................................4
Usage Information ..........................................................................5
Technical Data ................................................................................6
2. Safety Instructions
General............................................................................................8
Safety Principles .............................................................................9
General Safety Rules.......................................................................10
Personal Protective Equipment.......................................................11
Information and Symbols................................................................12
General Warnings ...........................................................................13
Responsibility .................................................................................14
3. Design and Function
Overview.........................................................................................16
Chain Saw Unit...............................................................................16
Chain Saw Bar ................................................................................17
Diamond Chain...............................................................................19
4. Controls and Display
Controls...........................................................................................21
Displays...........................................................................................21
5. Operation
General............................................................................................22
System Requirements......................................................................26
Preparatory Operations ..................................................................26
Working with the CSH24 Chain Saw ............................................31
After Use ........................................................................................33
6. Maintenance
General............................................................................................34
Maintenance and Service Table......................................................36
7. Servicing
General............................................................................................38
Tensioning the Diamond Chain......................................................40
Changing the Diamond chain..........................................................41
Changing the Bar ...........................................................................42
Changing the Drive ........................................................................43
Troubleshooting..............................................................................44
8. Taking out of service and storage
General............................................................................................46
Storage ............................................................................................47
9. Transport
Transporting the CSH24.................................................................48
Product description
1 Product description
The CSH Chain Saw
Main Components
Fig. 1-1 Main components
7 Rear Handle
8 Coupling FD (flow)
9 Water Hose Assembly
10 Nipple FD (return)
1 Bar
2 Chain
3 Front handle
4 Valve block
5 Cutting mandrel
6 Chain guard
1
2
3
5
4
6
7
8
9
10
4
Product description
Intended purpose
The CSH24 Chain Saw is designed and built for the following
applications:
• Cutting of concrete (including reinforced), masonry and natural stone
• Cutting of severance cuts, flush cuts and cross-cuts in ceilings, floors
and walls
•Only original Diamond Products Chain should be used
Safety measures
Any use other than for the intended purpose constitutes improper use or
misuse.
Since improper use or misuse can result in considerable danger,
here are some examples of what we believe constitute improper
use or misuse.
The following applications are prohibited:
• Cutting without the safety devices provided
• Cutting wood, glass and plastics
• Cutting without system and tool cooling
• Cutting in explosion-protected areas
• Cutting loose parts
• Incorrect or absence of waste water disposal (saw sludge)
Workplace Safety
Allow enough room for maneuvering toensure danger-free working.
Make sure you have sufficient lighting at your workplace.
Clearly cordon off the danger area so that no person can enter the danger
area during sawing.
The front, underneath and rearof the sawing area must be protected so
that persons or equipment cannot be harmed by falling objects,
concrete slurry, or by the protruding cutting tool.
Secure pieces of concrete that have been loosened to prevent falling.
Breathing in the water vapor that is created is a health hazard.
Ensure adequate ventilation in sealed-off areas.
The slurry resulting from cutting is slippery. Remove the slurry orensure
that you orother people donot slip on it.
Usage Information
5
Product description
Technical data
CSH24 Chain Saw
•Can be used with any hydraulic actuator (use a flow divider with
pressure limiter > 11 gpm or> 2000 psi
• Flush cutting possible without removing the protective cover
Hydraulic system
Length 6.5ft
Hydraulic hose
Weight
CSH24 Chain Saw with bar and chain 23 pounds
Dimensions of the CSH24 Chain Saw
Fig. 1-3 Dimensions of CSH24 Chain Saw
Maximum pressure 2,000 psi
Maximum flow 12 gpm
Minimum working pressure 36 psi
Minimum flow 2 gpm
38-3/8"
16-5/16"
10-7/16"
9"
22"
Water
6
Product description
Noise level
Depending on the working environment, the CSH24 Chain Saw can
cause excessive noise during operation.
The noise can permanently harm the hearing of operating personnel and
of other people nearby within a short time.
Ear protection must therefore always be worn while working.
Danger
Noise danger
When using the CSH24 Chain Saw hearing protection must be
worn.
If this instruction is not followed irreparable hearing damage may
result.
7
Safety instructions
2 Safety instructions
General
Target audience
This chapter describes the safety instructions that are essential to
follow when using the CSH24 Chain Saw
All persons who work on and with the CSH24 Chain Saw, have a duty to
read and understand the chapters of the Operating instructions relevant to
their particular activities.
This applies in particular to the “Safety instructions” chapter which is
mandatory for all persons and activities.
Observance of the safety instructions
No work must be performed on or with the CSH24 Chain Saw before the
safety instructions contained in the Operating instructions have been read
and understood. The Operating instructions are mandatory for all work
– abridged instructions should only be used in the form of
checklists.
The CSH24 Chain Saw has been inspected before being shipped and is
delivered in perfect condition. Diamond Products does not accept
any liability for damage caused by the failure to observe the
instructions and information provided in the Operating instructions. This
applies in particular to:
• Damage caused by improper use and operator error.
• Damage caused by failure to observe safety-related information in the
Operating instructions or shown on the warning signs fitted to the
machine.
• Damage caused by defective or absence of maintenance work.
Independently performed conversions and alterations may affect safety
and are not permitted.
Use for intended application
The intended application is described in chapter one.
Observance of workplace safety and the danger area
The workplace and danger area are described in chapter one.
8
Safety instructions
Safety principles
Safety Boundaries
The CSH24 Chain Saw has no effect on the safety concept of the
connected systems, apparatus and installations.
Safety elements
Protection from personal injury is based primarily on a safety concept and
design safety.
Passive safety elements
Protection from live parts
All functional units that contain parts which carry hazardous voltages, are
shock-protected by suitable covers.
Removing protective devices
Protective devices should only be removed when the device is turned off,
disconnected from the mains and at a standstill. Safety components in
particular should only be removed and refitted by authorised personnel.
Before using the CSH24 Chain Saw again, the safety elements must be
checked for correct operation.
Safety measures (organisational)
Product monitoring obligation
Operating personnel must notify changes in the operational behaviour or
safety-related components to a responsible person or the manufacturer
immediately.
Location of Operating instructions
A copy of the Operating instructions must be available at all timesto
staff where the CSH24 is in use.
9
Safety instructions
General safety rules
Statutory provisions
The generally applicable national and local safety and accident prevention
provisions and the supplementary operator regulations must be followed
and complied with.
Inspection and maintenance obligation
The operator is under an obligation to only use the CSH24 Chain Saw
when it is in a perfect and undamaged condition. The maintenance
intervals shown in the Operating instructions must be adhered to without
fail. Malfunctions and mechanical damage must be rectified without delay.
Spare parts
Only Diamond Products original spare parts should be used.
Otherwise damage may be caused to the CSH24 Chain Saw or to other
property and persons.
Power connections
The CSH24 Chain Saw must be connected and coupled to the drive
assembly used in accordance with the Operating instructions.
Modifications
No technical alterations should be made to the apparatus in the form of
additions or conversions without the written consent of Diamond
Products
Safety instructions in the individual chapters
The chapters of these Operating instructions contain additional safety
instructions. These make reference to specific potential dangers (residual
dangers). The instructions must be followed closely and require that the
actions described are taken.
10
Tabla de contenidos
Otros manuales de Motosierra de Diamond Products
