Diagtools X-431 EURO TAB II Manual de usuario

Quick Start Guide All pictures and descriptions illustrated herein are for reference purpose

only and this Quick Start Guide is subject to change without notice.

X-431 EURO TAB II Tablet Accessory Checklist

X-431 EURO TAB II Tablet

A tablet for showing

test results.

Docking Station

See Section “Docking

Station” .

VCI Device

A device for accessing

vehicle data.

Type-C Charging Port

Charging Slot

Data Transmission Port

Memory Card Slot

Ambient Light Sensor

Charging Indicator

Microphone

Front Camera

Power/Screen

Lock Button

Volume Buttons

10.1" Touch Screen

Camera Flash

Rear Camera

Audio Speaker

Adjustable Kickstand

Audio Speaker

(Reserved for and

other USB devices use only.)

add-on modules, ( )Reserved for charging or transferring data.

(

for storage extension.)

To store the memory card

(

placing it on the docking station)

For charging the tablet via

(Red means Charging, and

Green means Fully Charged.)

(

)

Flip out it to any angle and work comfortable

at your desk, or hang it on steering wheel.

Power Adaptor

To supply power to the tablet

through connection to AC

outlet.

OBD I Adaptor Cable

A converting cable for

connecting non-16 pin

connector.

Cigarette Lighter Cable

To supply power to the non-

16pin connector via vehicle’s

cigarette lighter receptacle.

Battery Clamps Cable

To provide power to the non-

16pin connector through

connection to the vehicle’s

battery.

Private & Confidential Sheet

A piece of paper bearing

Product S/N and Verification

Code, which is required for

your VCI activation.

OBDII Extension Cable

To connect the VCI device

for extension purpose.

Non-16pin Adaptor Kit

(Optional. For different

vehicle diagnostic sockets, it

may be necessary to use one

of the connectors/adaptor

cables included within the

kit. For detailed non-16pin

connectors, please check the

package box)

If you have any questions on the operation of the unit,

please contact DIAGTOOLS SIA customer support:

Thanks for choosing LAUNCH!

Address: Pernavas 43A, Riga, Latvia, LV-1009

Phone: +371 29416069 / +371 29417871

Email: [email protected]

DIAGTOOLS SIA, Pernavas 43A, Riga, Latvia, LV-1009, www.diagtools.lv, [email protected], +37129416069

VCI(Vehicle Communication Interface) Docking Station

1. Charging & Turning On

The VCI device works as a vehicle communication interface device, which is used to connect to

the vehicle's DLC (Data Link Connector) socket via OBD II extension cable to read the vehicle

data and then send it to the tablet via Wi-Fi. It can work with the passenger & commercial

vehicles.

(Plug the VCI device into the socket for demo experience via OBD II

extension cable when the docking station is connected to the AC outlet.)

Charging Slot

OBD 16 Socket with power output

(To charge the tablet.)

Choose any of the followings to charge it:

1. Use the included power adaptor: Connect one end of the adaptor to Type-C charging port of

the tablet, then connect the other end to the AC outlet.

*Warning: Please use the included power adaptor to charge the tablet. No responsibility can be

assumed for any damage or loss caused as a result of using power adaptors other than the one

supplied.

sits on the docking station.

c). Insert one end of power adaptor into the Type-C charging port of the docking station,

then plug the other end into the AC outlet.

3. Press the [POWER] button on the tablet, the system starts initializing and then enters the home

screen.

*Note: If the battery remains unused for a long period of time or the battery is completely

discharged, it is normal that the tablet will not power on while being charged. Please charge it for a

period of 5 minutes and then turn it on.

DC OUT5V Port

Type-C Charging Port

Power Indicator

(Illuminates red when it is powered up.) (Reserved for

other USB devices only.)

charging

(To supply power to the

docking station through

connection to AC outlet.)

LED Indicators

It is defined as follows:

1. Power: It illuminates solid red when the module is

powered on.

2.Vehicle: While communicating with the vehicle, the

indicator lights up and flashes. Otherwise, it will not

illuminate.

3.BT: It illuminates when the VCI device is working in

wireless BT communication mode.

4. I/O: It lights up when the VCI device is connected to the

tablet via data cable.

5. Wireless: It illuminates when the VCI device is working

in the default WLAN communication mode.

(To connect on vehicle's OBD II DLC.)

OBD-16 connector

Data I/O port

(

vehicle diagnosis via data cable.)

To connect it to the tablet to perform

Technical Parameters:

Working voltage: 9~36V

Available communication mode:

1) Wireless

2) Data cable

*Note: When the VCI device is

connected to the tablet via data

cable, the system will switch to USB

mode automatically and the Wireless

communication becomes disabled.

*Note: When connecting the non-OBD II

vehicle’s DLC, please check the type of the

DLC and select the corresponding non-

16pin connector or adaptor cable. After use,

please remember to unplug it from the

vehicle’s DLC.

DC-IN power jack

(For connecting the power adaptor.)

Reset hole

(To reset the VCI device.)

Quick Start Guide

DIAGTOOLS SIA, Pernavas 43A, Riga, Latvia, LV-1009, www.diagtools.lv, [email protected], +37129416069

2. Use the docking station: Follow the steps described as below to charge the tablet:

a). Locate the charging slot on the tablet and the docking station.

b). Align the charging slots, and then dock the tablet into the station to ensure that it firmly

3. Register & Update (Cont.)

Quick Start Guide

2. Network Setup

3. Register & Update

The tablet has dual built-in wireless communication modules. One is used to communicate

with the VCI device, and the other allows the tablet to get online. Once you're online, you can

your network.

If the VCI device is successfully activated, the tablet will automatically obtain the VCI ID and

connect to it. In this case it is not necessary for the user to manually configure it again. Hence

user only needs to set the WLAN connection.

*Note: For details on how to activate the VCI device, refer to Section 3. Register & Update.

Follow the steps below to proceed:

the tablet

*Note: Once WLAN is set as ON, the tablet will consume more power. While it keeps unused, please

set it off to save power. While WLAN is not in use, please turn it off to conserve battery power.

1. On the home screen, select Tablet Settings WLAN.

2. Slide the WLAN switch to ON, will start searching for all available wireless

networks.

3. Select a wireless network:

If the chosen network is open will connect automatically.

If the selected network is encrypted a network password will need to be entered.

1. Launch App: On the home screen, tap “Login” on the upper right corner of the screen, a

dialog box similar to the following will pop up on the screen.

a. If you are a new user, tap on “New Registration” to start your sign-up. Refer to Steps 2-4.

b. If you have registered to be a member, type in the username and password and tap on

“Login” directly.

c. If you forgot the password, tap on “Retrieve password” to set a new password.

2. Create an App Account: Tap on “New Registration” in Figure A, input the information

(items with * must be filled) and then tap on “Register”. Refer to Figure B.

3. Activate VCI Connector: Input the Product S/N and Activation Code (can be obtained

from the Private & Confidential Sheet), and then tap on “Activate”. Refer to Figure C.

4. Finish Registration: To download the diagnostic software, tap on “Yes” to navigate to the

download page. Tap on “No” to download and install it later.

On the download page, tap on “Update” to start downloading until it is complete.

Select Country

Confirm Password

Password

Username

CAPTCHA CAPTCHA

2 3

Create an Account

Activate VCI

Finish Registration

Create an Account

Activate VCI

Finish Registration

1 3

Serial Number

Activation Code

Where is my activation code?

>> Skip

Activate

123

Yes

Congratulations! You have registered successfully. Do you download vehicle

software now?

Create an Account

Activate VCI

Finish Registration

Username

Password

Retrieve password

New Registration

DIAGTOOLS SIA, Pernavas 43A, Riga, Latvia, LV-1009, www.diagtools.lv, [email protected], +37129416069

1). OBD II Vehicle Connection

the vehicle’s OBD II DLC.

Connect one end of the OBD II extension cable to the OBD-16 connector, and the other end to

A. For Passenger Cars:

B. For Commercial Vehicles:

2). Non-OBD II Vehicle Connection

VCI Device

OBD I Adaptor

OBD II Extension Cable

Non-16pin Connector

Adaptor Cable

To Vehicle’s DLC

Cigarette Lighter Cable/

Battery Clamps Cable

Cigarette Lighter Cable/

Battery Clamps Cable

To Cigarette Lighter Receptacle/

To Vehicle's Battery

To Cigarette Lighter Receptacle/

To Vehicle's Battery

If the power supply on vehicle diagnostic socket is insufficient or the power pin is damaged,

you can get power in the following ways:

1. Locate Vehicle’s DLC

The DLC (Data Link Connector) is typically a connector

where diagnostic code readers interface with the

vehicle's on-board computer.

For commercial vehicles, it is generally located in the

driver's cab.

For passenger cars, it is usually located on driver’s side,

about 12 inches away from the center of dashboard. For

potential DLC location of most vehicles, see Figure DLC

Location.

Quick Start Guide

5. Start Diagnostics

4. Vehicle Connection

*Note:

suggested to check for updates on a frequent basis and

keep synchronized with the latest available software.

To enjoy more and functions, you are capabilities

Preparation

Before diagnosing a vehicle, please make sure the

following:

ü Switch the ignition on.

~ 14V or 18V ~ 30V.

ü Throttle should be in a closed position.

Vehicle battery voltage range should be 11V

Statement: We own the complete intellectual property rights for the software used by this product.

For any reverse engineering or cracking actions against the software, we shall block the use of this

product and reserve the right to pursue their legal liabilities.

There are three kinds of diagnosis approaches available on the tablet: Intelligent Diagnosis,

Manual Diagnosis and Remote Diagnosis.

Intelligent Diagnosis:

Through simple wireless communication between the tablet and VCI device, you can easily

get the VIN (Vehicle Identification Number) information of the currently identified vehicle.

Once the VIN is successfully identified, the system will retrieve it from the remote server and

then guide you to vehicle information page without the necessity of step-by-step manual

menu selection. *Note: This method only applies to the passenger vehicles.

Manual Diagnosis:

In this mode, you have to diagnose a vehicle by performing the menu-driven command

manually. For new users, please follow the operation chart shown below to get familiar with

and start using this tool.

Tap on "Local Diagnose"

Select vehicle

Follow the prompts

on the screen

Select software version

and tap on “OK”

2. Vehicle Connection

DLC Location

If the DLC cannot be found, refer to the vehicle’s service manual for the exact location.

Remote Diagnosis:

This option aims to help repair shops or professional technicians launch instant messaging

and remote diagnosis, making the repair job getting fixed faster.

For more detailed operations, please refer to the User Manual.

DIAGTOOLS SIA, Pernavas 43A, Riga, Latvia, LV-1009, www.diagtools.lv, [email protected], +37129416069

Manuales populares de Tableta de otras marcas

Laser

Laser MID-1060 Guía del usuario

MUNBYN

MUNBYN IRT09J Guía de inicio rápido

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manual de usuario

Dell

Dell Latitude ST Manual del propietario

Lenovo

Lenovo IdeaTab S6000L Manual del propietario

Venturer

Venturer WT9L11 Manual de usuario

EDUGEAR

EDUGEAR UnoBook Manual de usuario

Philips

Philips PI3210G/58 Manual de usuario

ADLINK Technology

ADLINK Technology IMT-BT Manual de usuario

TwinMOS

TwinMOS TwinTAB-T102D1 Manual de usuario

Archos

Archos 9.7 xenon Manual de usuario

Getac

Getac E100 Manual de usuario

HANNspree

HANNspree HANNspad SN70T3 Manual de usuario

Philips

Philips PI3105W2/55 Manual de usuario

LG LG-V935 Manual de usuario

Zeki

Zeki TBDB763B Manual de usuario

Ricoh

Ricoh eQuill Manual de usuario

DT Research

DT Research DT365CT Instrucciones de montaje