DFI DT122-HR Manual de usuario

1

DT122-HR

Installation Guide

www.dﬁ.com

• 1 DT122-HR system unit

• 1 HDD drive bay kit

• 1 Quick Installation Guide

• 1 CD disk includes:

- Drivers/Manual

•

Power Cord

•

Wall Mount Kit

Package Contents

Optional Items

2

Front View

Power Button

HDD LED

Power LED

Reset Button

Rear View

Line-out

COM 2

Mic-in

Line-in

DVI-I

(DVI-D Signal)

COM 1

PS/2 KB

PS/2 Mouse VGA

LAN 1-2

USB 2.0

Expansion slot

3

Key Features

DT122-HR

PROCESSOR 3rd/2nd Generation Intel®CoreTM processors (under 45W)

CHIPSET Intel®QM67

LAN 2 LAN ports

COM 2 COM ports

DISPLAYS 1 DVI-I, 1 VGA

USB 4 Type A USB 2.0/1.1 ports

2 Type A USB 2.0/1.1 ports

AUDIO Mic-in, Line-in, Line-out

4

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices

connected to it has been powered-off.

2. Disconnect all power cords and cables.

3. The 4 mounting screws on the sides of the system are

used to secure the cover to the chassis. Remove these

screws and then put them in a safe place for later use.

Mounting

screw

Mounting

screw

5

4. After removing the mounting screws, slide the cover

backwards.

Slide the Cover Backward

5. The memory sockets and SATA drive bay are readily

accessible after removing the chassis cover.

Memory socket 2.5"/3.5" SATA

drive bay

6

1. Remove the 4 mounting screws that secure the drive

bay to the system.

Installing a 2.5" or 3.5" SATA

Drive

lnstalling a 2.5" SATA Drive

2. Turn to the other side of the drive bay and remove the

4 mounting screws that secure the HDD brackets to

the drive bay.

Mounting screw

Mounting screw

Mounting screw

Drive bay

Drive bay

7

3. Align the mounting holes of the SATA drive with the

mounting holes on the HDD bracket and then use the

provided mounting screws to secure the drive in place.

Mounting screw

SATA drive

HDD bracket

Mounting screw

8

4. Turn to the other side of the drive bay. Use the

provided mounting screws from step 2 to secure the

SATA drive (with HDD bracket) onto the drive bay.

Mounting screw

Drive bay

Mounting screw

5. Place the SATA drive bay assembly into the chassis.

Secure the SATA drive bay with the mounting screws

you removed in step 1.

Mounting screw

Mounting screw

9

6. Connect the SATA data cable and SATA power cable to

the connectors on the SATA drive.

SATA data cable

SATA power

cable

10

2. Insert the spacer into the anti-shock bumper. You will

ﬁnd the spacers in the HDD drive bay kit that comes

with the DT122 package.

lnstalling a 3.5" SATA Drive

Drive bay

spacer

spacer

3. Place the SATA drive on the drive bay. Align the

mounting holes of the SATA drive with the mounting

holes on the drive bay.

SATA drive

Drive bay

1. Remove the 4 mounting screws that secure the drive

bay to the system.

Mounting screw

Mounting screw

Drive bay

Otros manuales para DT122-HR

2

Tabla de contenidos

Manuales populares de De oficina de otras marcas

HP

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP

HP Presario SV7000 - Desktop PC Manual de usuario

HP

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario