DeWalt D21110 Manual de usuario

D21110

ENGLISH

ROTARY DRILL

D21110

Congratulations!

You have chosen a DEWALT Power Tool. Years of

experience, thorough product development and

innovation make DEWALT one of the most reliable

partners for professional Power Tool users.

Technical data

D21110

022VegatloV

Power input -A9 W 600

No-load speed min

-1

0 - 2,600

Maximum drilling range in

steel/wood mm 13/25

Chuck spindle thread size UNF 1/2" x 20

Collar diameter mm 43

Maximum chuck capacity mm 13

8.1gkthgieW

Fuses:

220-240 V tools 10 Amperes, mains

The following symbols are used throughout this

manual:

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Denotes risk of electric shock.

IEC60745

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Be aware of the location of pipework

and wiring.

• Apply only a gentle pressure to the tool.

• Use auxiliary handles supplied with the

Excessive force does not speed up

tool. Loss of control can cause personal

injury.

drilling but decreases tool performance

and may shorten tool life.

Prior to operation:

• Insert the appropriate bit.

• Mark the spot where the hole is to be drilled.

Switching on and off (fig. A)

• To run the tool, press the variable speed switch (1).

The pressure exerted on the variable speed switch

determines the tool speed.

Chuck removal (fig. B)

• Open the chuck jaws as far as possible.

Always wait until the motor has come to

a complete standstill before changing the

direction of rotation.

• Insert a screwdriver into the chuck and remove

the chuck retaining screw (8) by turning

clockwise.

• Tighten an Allen key into the chuck and strike it

with a hammer as shown.

Inserting and removing a bit (fig. A)

Keyed chuck

• Open the chuck by turning the sleeve (6)

counterclockwise and insert the bit shank.

• Put the chuck key (7) into each hole in the side

of the chuck and turn clockwise until tight.

• To remove the bit, proceed in reverse order.

Forward/reverse slider (fig. A)

• To select forward or reverse rotation, use the

forward/reverse-switch (3) (see arrow on tool).

ENGLISH

• If necessary, press the lock-on button (2) for

continuous operation and release the switch.

The lock-on button works only in full speed,

forward rotation.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair

agent where it will be disposed of in an

environmentally safe way.

• To stop the tool, release the switch.

• To stop the tool in continuous operation, press

the switch briefly and release it. Always switch off

the tool when work is finished and before

unplugging.

Screwdriving

• Select forward or reverse rotation.

Consult your dealer for further information on the

appropriate accessories.

Otros manuales para D21110

Tabla de contenidos

Otros manuales de Perforar de DeWalt

DeWalt

DeWalt DW954 Manual de usuario

DeWalt

DeWalt MATRIX DCD777C2 Manual de usuario

DeWalt

DeWalt DW130 Manual de usuario

DeWalt

DeWalt DW101 Manual de usuario

DeWalt

DeWalt DC988 Heavy Duty XRP Manual de usuario

DeWalt

DeWalt DW509 Manual de usuario

DeWalt

DeWalt DW133 Manual de usuario

DeWalt

DeWalt DC750 Manual de usuario

DeWalt

DeWalt DCD710S2 Manual de usuario

DeWalt

DeWalt XR Li-Ion DCD771 Manual de usuario

DeWalt

DeWalt DW955 Manual de usuario

DeWalt

DeWalt DW505 Manual de usuario

DeWalt

DeWalt DWD022 Manual de usuario

DeWalt

DeWalt DW006 Manual de usuario

DeWalt

DeWalt DC980 Heavy Duty XRP Manual de usuario

DeWalt

DeWalt DW131 Manual de usuario

DeWalt

DeWalt DCD443 Manual de usuario

DeWalt

DeWalt DCD701C1E Manual de usuario

DeWalt

DeWalt DW505 Manual de usuario

DeWalt

DeWalt DCD792 Manual de usuario

DeWalt

DeWalt D21710 Manual de usuario

DeWalt

DeWalt XR DCD470 Manual de usuario

DeWalt

DeWalt DCH417 Manual de usuario

DeWalt

DeWalt DCD910 Manual de usuario

Manuales populares de Perforar de otras marcas

Makita

Makita BDF456 Manual de usuario

Black & Decker

Black & Decker LDX220 Manual de usuario

Hitachi

Hitachi DH 40MA Manual de usuario

Challenge

Challenge JO Manual de referencia técnica

Makita

Makita LXFD01 Manual de usuario

Festool

Festool T18+3 Manual de usuario

Milwaukee

Milwaukee M12 FPDX-202X Manual de usuario

EINHELL

EINHELL TE-RH 32 E Manual de usuario

Makita

Makita DHP484 Manual de usuario

Makita

Makita FD05 Manual de usuario

Bosch

Bosch PSB 530 RA Manual de usuario

Maximum

Maximum 054-1359-4 Manual de usuario

Makita

Makita HP332D Manual de usuario

Raider

Raider RDP-HD31H Manual de usuario

Bort

Bort BPM-1400x2 Manual de usuario

Black & Decker

Black & Decker 7266 Manual de usuario

KENT USA

KENT USA TRD1230 Manual de usuario

Bosch

Bosch GSB 19-2 RE Manual de usuario