Using Bluetooth allows music to be streamed wirelessly and
conveniently to the Solar Sound 2 from approximately 10 meters /33
feet away (further is possible in a direct line of sight).
First, turn on the Solar Sound 2. After the beep sound the unit will
search for previously paired devices for 8 seconds. If no previously
paired devices are found then it will enter pairing mode for 3 minutes.
‘’Paired’’ and ‘’pairing’’ refers to the process of two Bluetooth devices
connecting to each other, in this case the Solar Sound 2 and your
music device / phone. During pairing mode, the red and blue lights
flash alternately and your phone or music device can discover and
connect to the Solar Sound 2.
To do this, first turn on Bluetooth on your music device (mobile
phone, MP3 player, computer or other). Then, search for other
Bluetooth devices according to the instructions for your device. You
will discover Solar Sound 2 on the list of available Bluetooth devices.
Then click ‘connect’. When prompted (sometimes it is not required),
enter the pass code ‘0000’. That is, 4 zeros.
For a walkthrough of this procedure on an iPhone, please visit our
website here: http://devotecindustries.com/solar-sound and choose
the interactive graphic at the bottom of the page.
After this procedure the Solar Sound 2 should have connected and be
displaying a continuous blue light, and you can proceed to play music
and use hands free speakerphone.
