Page 9 Manual_Revised_V1.0
GENERAL SAFETY RULES
WARNING: Read all warnings and
instructions. Failure to follow all instructions
listed below may result in electric shock, re
and/or serious personal injury.
The term “power tool” in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
1. WORK AREA SAFETY
1) Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
2) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
3) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. ELECTRICAL SAFETY
1) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
2) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
3) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
4) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
6) If operating a power tool in a damp location
is unavoidable, use residual current device
(RCD). Use of RCD reduces the risk of
electric shock.
3. PERSONAL SAFETY
1) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the inuence of drugs, alcohol,
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
2) Use safety equipment. Always wear eye
protection. Safety equipment such as a
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
3) Avoid accidental starting. Ensure the switch
is in the off-position before connecting to
power source and/or battery pack, pick up or
carrying power tools. With your nger on the
switch or plugging in power tools that have
the switch on invites accidents.
4) Remove any adjusting key or wrench before
turning the tool on. A wrench or a key that is
left attached to a rotating part of the power
tool may result in personal injury.
5) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6) Dress properly. Do not wear loose clothing
or jewellery. Keep your clothing, gloves, and
hair away from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
7) If devices are provided for the connection
of dust extraction and collection facilities,
ensure that these are connected and
properly used. Use of these devices can
reduce dust-related hazards.
8) Use clamps or another practical way to
support and secure the workpiece to a
stable platform. Holding the work by hand
or against your body leaves it unstable and
may lead to loss of control.
9) Do not use on a ladder or unstable support.
Stable footing on a solid surface enables
better control of the power tool in unexpected
situations.
10)Keep handles dry, clean, and free from oil
and grease. Slippery hands cannot safely
