Devine Blist Live Manual de usuario
Blist Live
Portable powered speaker system
User manual
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
Safety instructions
This unit must be operated by, or under the supervision of an adult. This device is not suitable for children.
Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow the instructions of this manual
- Ma e sure there is no damage caused by transport. If the device seems damaged from the outside, do not
use it and contact your dealer for more information and consultation.
- To ma e sure the device maintains in perfect condition and for safe operation, it is necessary for the user to
follow the instructions and warning notes of this user manual.
- Damage caused by improper use or modifications to the device are not covered by warranty.
- This device does not have any user-serviceable parts inside. Servicing of this device needs to be done by
qualified technicians.
Important notes regarding safety and health:
- Never let the power cord come in contact with other cables. Handle the power cord and all connectors with
the mains with caution.
- Never remove any warning or informative labels from the unit
- The ground contact always needs to be connected. Do not cover or remove the ground contact.
- Never leave cables lying around
- Do not open the device and do not modify any hard- or software of this unit.
- Do not insert object into air vents of this device.
- Do not connect this device to a dimmerpac .
- Do not switch the system on and off frequently as this will reduce the lifespan of the device.
- Do not drive the inputs of the system with a signal larger than required to wor at full performance.
- Only use this device indoor, avoid contact with water, moist or other liquids. Do not place items filled with
liquids on top of the unit.
- Avoid nearby flames or heat sources, do not place this device near flammable liquids, gas or flammable
items.
- Always disconnect the device when it is not in use for a longer period or time, when servicing is needed or
when the device needs cleaning.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
W RNING!
lways keep this device away from moisture and rain! Hazardous electrical shocks may occur!
W RNING!
Only connect this device to a matching power outlet. This device is intended to work on a
specified C currency. Connecting this device to power outlets with other voltages may result in
permanent damage and possible hazardous situations, such as fire or electrical shocks!
W RNING!
Be careful with every operation of this device. Touching live wires inside and outside the unit
may cause hazardous electrical shocks!
- Only handle the power cord by its connectors. Never pull the cable to remove a connector from its soc et,
as this could lead to damage and electrical shoc s.
- Always operate this device with a stable AC current.
- Always operate this device with the AC ground wire connected to the electrical system's ground.
- Never use other types of cables than specified in the manual, do not use defective or bad functioning
cables. Contact your dealer when the included or required cables do not wor properly with this device.
- When the device has been exposed to large temperature differences (for example, transport from outdoor
to indoor), do not connect the device immediately. Do not activate the unit until it has reached room
temperature, as moist might build up inside the unit, which may cause short circuits and/or electrical shoc s.
- The power connection of the mixing panel or the connection to a wall outlet needs to be accessible at all
times. If a problem with the electronic circuitry is present, it must be possible to shut down the unit instantly.
It is however possible to install a primary switch to power an entire group of electronical products, which can
be shut down instantly by any person who is present in the room.
Guidelines and types of use:
- This device is intended to be used by professionals on stage, houses of worship, public community centers,
meeting rooms and various other places that require a mobile sound system capable of amplifying vocals
and music.
- This product is not designed for regular household use and should be handled with care if you wish to do
so. This spea er system is capable of producing sound with a high SPL, which may cause permanent
hearing damage to yourself and others in your direct environment. Please use this product with care and do
not let unqualified people use the system.
- This device is not suitable for use by children and always needs to be operated by an adult.
- Only use the device when the environment is suitable and will not cause any damage. Do not use the
product in moist or dusty environments, or where long-term damage may occur such as:
- indoor swimming pools where chlorine is used.
- Beaches, where sand and salt are present.
- Outdoor
- Indoor areas where intense heat sources are present or where the temperature exceeds levels
which are comfortable for humans.
- Only use the included power cable and only connect the device to a suitable power outlet with the correct
output voltage. Connecting the device to a power outlet with the wrong type of voltage or using the product
with a wrong type of power supply may cause permanent damage to the device.
- Avoid shoc s and collision during use and transport. Do not transport the device while in use. Avoid brute
force during the installation and operation of this device.
- Familiarize yourself with the functions of the device before use. Do not allow operation of the device by
uns illed or unqualified people.
- Use of the device in other ways than described in this user manual may cause damage and injury. Devine
can not be held responsible for any damage or injury caused by improper use.
Storage and transport:
- This device is intended for regular mobile use, as well as mobile setup in the same building (such as
educational institutes, community centres and houses of worship where a sound system does not always
need to be present). The product does not need to be protected seperately during transport if all components
are mounted properly in the original way. Please handle the product with care and avoid brute force, severe
shoc s and possible penetration from sharp or high-impact objects during transport.
- This device is not intended for continuous use. Operation brea s will ensure that the lifespan of the device
remains unchanged.
- If the device is not used for a longer period of time, disconnect it from its power source and store it in its
original shape (with the mixing and storage panels mounted to the spea ers).
- Store the device indoor, dry and do not expose the device to extreme temperature differences.
Housing:
- Inspect the housing of the device frequently. Severe dents, crac s and missing screws should be avoided
at all costs. Do not use the device when the housing is not in optimal condition. Contact your dealer or a
s illed technician when in doubt about the state of the device.
- Chec the fixture and screws for corrosion. Corrosion should not be present on the fixture. Contact your
dealer or a s illed technician when corrosion is found on the fixture.
- Every power or signal chassis/connector should be mounted tightly. Do not use the device when connectors
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
are loose.
- Do not use the power cord if the cores are visible. Contact your dealer for a replacement if needed.
- Avoid the buildup of dust and dirt. Clean the exterior of the fixture every month with a dry or damp cloth.
When using the device intensively, the cleaning frequency needs to be increased. Disconnect the fixture
when it is going to be serviced.
- Do not cover the ventilation slots and/or heatsin s of this device with objects such as cloths which prevents
the device from cooling if needed.
- The mixing panel of this device can not be installed into a flat or fixed surface such as a des or shelf.
Fuses:
- The main fuse of this device is to be found on the side of the mixing panel, next to the power inlet.
- Only replace a fuse for a new one with the same type and rating! Do not use a fuse with a higher or lower
rating.
- Do not bridge the fuse in any way, as the fuse is used for protection against electrical shoc s and short
circuit. The fuse is a safety measure to protect you and your audience from hazardous electrical shoc s.
- Always mount the fuse cover bac to the fuse compartment. Do not use tape or other fastening materials to
close the cover. If the fuse holder is bro en, contact your local dealer and do not use the fixture.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
Symbol explanation:
WEEE: Dispose of this product properly. This product is part of the WEEE directive – the
Waste Electrical and Electronic Equipment directive. The requirements stated in this directive
apply for all manufacturers and producers of electronical equipment in the EU.
Do not dispose of this product together with regular household trash. Contact your local
government for more information about proper disposal and recycling of electronic products in
your region. By recycling this product properly after use, we can wor together to enjoy these
products and also protect our environment from being polluted as much as possible.
CE: The CE mar indicates that the product complies with applicable European directives and
regulations.
Indoor use only: This device is designed to only be used indoor. The maximum ambient
temperature should not exceed 40 degrees Celsius (104 degrees Fahrenheit)
Contact:
Devine pro audio and studio products
Verrijn Stuartweg 18
4462 GE Goes
The Netherlands
Please do not send any products directly to this address. If you wish to return a product for a refund or
repair, please contact your local dealer for an RMA (Return Material Authorisation)
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
Guidelines for speakers
- void exposure to high sound pressure levels for a longer period of time. See the charts on this
page for more information about sound pressure levels and exposure to high levels.
Continuous dB Permissible exposure time
85 8 hours
88 4 hours
91 2 hours
94 1 hour
97 30 minutes
100 15 minutes
103 7.5 minutes
106 3.75 minutes (<4 minutes)
109 1.875 minutes (<2 minutes)
112 0.9375 minutes (<1 minute)
115 0.46875 minutes (+/- 30
seconds)
- When installing this spea er on a spea er stand or distance pole, always tighten the screw nobs firmly.
- When using this spea er for the first time, set the gain settings on the amplifier (module) on a minimum
level. After this, raise the volume to a comfortable listening level (not at its maximum level). The spea er
needs to perform on a moderate level for several hours to perform on its full potential, when used for the first
time.
- When transporting the spea er on a cart, use caution during movement. Prevent the cart and spea er
combination from tipping over as this may cause serious injuries.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
W RNING!
This loudspeaker system is capable of producing a sound pressure level which can be harmful
for humans and animals when used incorrectly and/or without protection. Possible permanent
hearing loss may occur when humans or animals are exposed to high sound pressure levels,
even during a small period of time.
Box contents
Box contents:
1x Blist Live spea er with powered mixer panel attached
1x Blist Live spea er with accessory compartment attached
1x power cable IEC C14 to Schu o (inside compartment)
1x power cable IEC C14 to UK (inside compartment)
2x dynamic microphone (inside compartment)
2x spea er cable (inside compartment)
2x XLR 3p male – XLR 3p female microphone cable (inside compartment)
Unit and accessory inspection
- Always use the supplied power cable to connect the unit to a power supply. If the cable appears bro en or
has visible damage, do not use it.
- If the unit is not going to be used for a longer period of time, disconnect it from the power supply and store it
in a dust-free environment.
- Always chec the unit for possible damage before use. If you suspect that something is wrong with the unit,
do not connect it to a power source! When you suspect that your unit is bro en or damaged, contact your
local dealer or a certified technician to inspect the unit.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
Product overview
Mixer panel
1. 3P XLR balanced microphone input
2. 6.35 mm mono TS jack line input
3. Red peak LED for each mono channel
4. EQ section: Treble adjustment (+/- 6dB)
5. EQ section: Bass adjustment (+/-6 dB)
6. Effect button level 0-10 for built-in reverb
7. Volume button level 0-10
8. Dual 6.35 mm mono TS jack line input (L+R)
9. Dual RC line input
10. Line input volume knob level 0-10
11. 3.5 mm stereo TRS UX line input
12. +48V phantom power
13. Reverb master effect level 0-10
14. USB/Bluetooth audio player level 0-10
15. Master volume level 0-10
16. Dual 6.35 mm mono TS jack line output
17. Dual RC line output
18. Monitor output volume level 0-10
19. 3.5 mm stereo TRS UX line output / headphones output
20. USB chassis for charging
21. LED VU-meter with limit LED
22. Power status LED
23. MP3 player with USB & Bluetooth
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
1
2
3
4
5
6
7
89
10 11
12
13
14 15
16 17
18
19
2021
22
23
MP3 functions:
- Mode switch button (ON/OFF function when held for 2 seconds)
- Play/pause button
- Stop button
- Loop mode button
- Previous button (also used for audio forward when held for 2 seconds)
- Next button (also used for audio rewind when held for 2 seconds)
- USB input for USB drives (up to 32 GB)
- Bluetooth audio pairing with any device capable of sending Bluetooth audio
- Clear, bright display
Power input (located on the side of the mixer panel)
- IEC C14 power input (power cables included)
- ON/OFF switch
- fuse cover and mains fuse
Speaker outputs (next to mixer panel):
- 2x 6.35 mm mono TS jac s
- Only use included spea er cables for connection
MENU MP3 Player
MODE
On/off / exchange
USB/BLUETOOTH
(Hold Mode button to turn
the player on or off)
Pause/Play
Stop
Repeat
Last Music Song
Next Music Song
Bluetooth
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
Use of the P system
If you want to set up the system, follow the next steps to ensure that you connect all elements of this product
properly.
1. The unit exists of the following parts:
– Spea er (2x)
– Rear compartment for cables (installed on the spea er)
– Mixer panel (installed on the spea er)
2. Unloc both attached panels, by unloc ing the mechanism. This can be done by sliding the grooved
mechanism to the left.
3. Detach both compartments. You now have 2 spea ers and 2 seperate panels, of which one contains the
mixer and the other is for cables.
4. Place the mixer panel on a solid surface, such as a table.
5. Place the spea ers on a solid surface (such as a floor, table or spea er stands) and tighten the nobs on
the rear if needed (only for installation on a spea er stand).
6. Open the cable lid and ta e the spea er cables out. These are the long cables with the straight plugs, also
nown as 6.35 mm (¼ inch) jac TS plugs. Please ma e sure that the mixing panel is turned off when
connecting or disconnecting the spea ers!
Plug the connectors into the spea ers and also into the spea er outputs of the mixer panel. Please be
cautious when plugging the connectors into the mixing panel, as these cables can only be connected to the
spea er outputs. The spea er outputs are installed directly into the top housing of the mixer panel and a
stic er shows you where to connect the spea er cables to.
7. Connect the included power cable of your choice to the power input of the mixer panel. Do not switch on
the device immediately. Connect the corresponding end connector to a power outlet (Schu o or UK).
8. Connect your auxiliary devices and microphones to the mixing panel. Please chec the stic er on the lid of
the cable compartment to be sure that you connect the right audio product to the right audio input.
If you use monitor spea ers or headphones, also use the right connections to connect them properly.
9. Turn on the mixing panel by pressing the switch next to the power input. The device will now be turned on.
Please chec if you have connected condenser microphones. If so, please turn on the 'Phantom power'
button to enable +48V Phantom Power.
Practical information
Use the tips below to ensure perfect audio quality and optimal use of the system:
– Do not turn up the volume and EQ nobs all the way up. Start with a small signal and turn the volume
slightly up when needed. Especially when using several audio inputs, it is li ely that one source will sound
louder than the other. Please eep the EQ nobs as much as possible on the central 0-point. This will usually
ensure the best audio quality. Only if required you can adjust the EQ.
– Keep the pea LEDs in mind and perform the necessary actions if they light up. If the pea LEDs only light
up slightly during use, it will not be a problem for audio quality. The tric is to eep the audio levels just
underneath the pea LED activation, to ensure the best audio quality and signal strength.
– Keep the master level VU meters in mind and do not drive the spea ers with a stronger signal than
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 29-09-2015 RV Revision date + author initials: 18-02-2017 RV
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de altavoces de Devine
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario