!
●Please read and observe the information
given in this Operation Manual. This will
enable you to avoid accidents, preserve
the manufacturer’s warranty and maintain
the engine in peak operating condition.
●This engine has been built exclusively for
the application specified in the scope of
supply, as described by the equipment
manufacturer and is to be used only for the
intended purpose. Any use exceeding that
scope is considered to be contrary to the
intended purpose. The manufacturer will
not assume responsibility for any damage
resulting therefrom. The risks involved are
to be borne solely by the user.
●Use in accordance with the intended pur-
pose also implies compliance with the con-
ditions laid down by the manufacturer for
operation,maintenanceandservicing.The
engine should only be operated by person-
nel trained in its use and the hazards
involved.
●Therelevantaccidentpreventionguidelines
and other generally accepted safety and
industrial hygiene regulations must be ob-
served.
●When the engine is running, there is a risk
of injury through:
- turning/hot components
- engines with positive ignition
- ignition systems (high electrical voltage)
You must avoid contact at all times!
●Unauthorized engine modifications will in-
validateanyliabilityclaimsagainstthemanu-
facturer for resultant damage.
Manipulationsoftheinjectionandregulating
systemmayalsoinfluencetheperformance
oftheengine,anditsemissions.Adherence
tolegislationonpollutioncannotbeguaran-
teed under such conditions.
●Donotchange,convertoradjustthecooling
air intake area to the blower.
Themanufacturershallnot beheld respon-
sible for any damage which results from
such work.
●When carrying out maintenance/repair op-
erations on the engine, the use of DEUTZ
original parts is prescribed. These are
specially designed for your engine and
guarantee perfect operation.
Non-compliance results in the expiry of the
warranty!
●Maintenance and cleaning of the engine
shouldonly be carried out whenthe engine
is switched off and has cooled down.
Youmustensurethattheelectricalsystems
have been switched off and the ignition
key has been removed.
Accident prevention guidelines concerning
electrical systems (e.g. VDE-0100/-0101/
-0104/-0105Electricalprotectivemeasures
againstdangerous touch voltage) are to be
observed.
When cleaning with fluids, all electrical
componentsaretobecoveredimpermeably.
