DESi Utopic R Manual de usuario
Wireless Motorized Cylinder
USER MANUAL
update 11.02.2021
!
GENERAL INFORMATION and WARNINGS
- Before using your motorized cylinder, Locking way (right or left handed door) and Number of turns should be adjusted
properly. Otherwise, the device will not work in the correct way and maybe broken.
- For emergency conditions, we recommend you to put the keys in an accessible place (like car, bag etc.)
- If there is any problem with the door or the locking mechanism, first of all, those problems have to be solved. The door's
mechanical parts and locking mechanism have to work properly.
- If there is a problem with the device, first look to the troubleshooting part of this manual. If you cannot solve the
problem, contact your dealer.
- All the system needs to be protected from water, direct sunlight and shocks.
- Auto-rotating parts of the device can cause injuries during installation. BE CAREFUL!
- If you are leaving your home for an extended period of time, first fully charge your motorized cylinder and take your
mechanical key with you. If you would leave more than 2 months, after charging your motorized cylinder, either shift the
motorized cylinder to childlock mode or leave your device as it is connected to charger. Otherwise, the batteries of your
product would die due to deep discharge.
2
3
Control Options and Compatible Accessories
Wireless Fingerprint Readers
Wireless Keypad
Wireless Auto-Locking Module
Wireless Home Automation Interface
Remote Controllers
Remote Access Module
2. BOX CONTENT
(May vary according to model)
1x Wireless Motorized Cylinder (with keys)
1x Charging Cable (USB)
1x Installation screw and Hex key
1. FEATURES OF THE DEVICE
Structure
ABS Plastic
Cylinder Length
(outside) 31 mm x 35 mm (inside)
Inside part can extensile up to 47 mm
(Different cylinder lengths are available)
Batteries and Battery Life
Your motorized cylinder is equipped with rechargeable
Lithium Ion batteries.
According to DESi labratory tests, with a usage of 10
operations per day on a 2 turns lock, battery life of
motorized cylinder is as follows:
90* days (Either RF or BLE is active)
60* days (Both RF and BLE are active)
Communication Capability
Bluetooth Low Energy
ISM RF 434 Mhz
4
3. PARTS OF DEVICE and INSTALLATION
Control
Buttons
Cylinder
Handle for
Manual
Operation
microUSB
Charging Port
1.STEP
Remove
existing
cylinder.
2. STEP
Install
motorized
cylinder and
tighten
the screw
5
In some security doors, even if you remove cylinder screw, you cannot remove cylinder due to cramped installation of
cylinder defender. Follow the instructions below, for that kind of situations:
- Untighten the screws of the cylinder defender (don’t remove the screws)
- Remove cylinder screw and take out the old cylinder.
- Disassemble the motorized knob from the cylinder.
- Install the cylinder part to the door and tighten the cylinder screw.
- Tighten the screws of the cylinder defender.
- Assemble the motorized knob with the cylinder.
DETACHING / ATTACHING MOTOR AND
CYLINDER
Loosen the set screw
with the hex key taken from
the box. Pull the motor part out.
To attach two parts, push the motor
properly into cylinder and tighten
the set screw. Set Screw
4. MASTER CONTROLLER AND USER CONTROLLERS
The first controller enrolled to motorized cylinder is accepted as the master controller. The rest of the controllers will be
user controllers. Both, master and user controllers can be used to lock/unlock the motorized cylinder but only the master
controller can change settings of motorized cylinder.
6
MOBILE APPLICATION
In this section, you can find details about usage of
Mobile Application
If you enroll your smart phone as first controller,
it will be master controller of your motorized cylinder.
Before you use your motorized cylinder, you should adjust it
properly according to the lock which motorized
cylinder will work together. First, you should adjust
“locking way” and then “number of rotation” (see page 10 and 11)
If you want to change the master controller of motorized
cylinder, check “HOW TO RESET MOTORIZED CYLINDER”
topic on the last page or please click on the link to watch how to
reset video https://www.youtube.com/watch?v=_4y8HBLEAyk
To use all available features of your device, we highly recommend you
to use a smartphone as master controller.
7
- Search “Desi Utopic” on application stores. Download, install and run the application.
- Choose language and set a password or skip it.
- Press and hold two buttons on motorized cylinder until you hear a long warning tone and then release buttons. After
that you will hear a short warning tone.
- On application screen, touch “+” on the top left corner to see the list of Utopic motorized cylinders around.
- Touch the UTOPIC line, enter a name for your device and touch the “green tick”. If a confimation pop-up appears,
confirm and device recognition process will start. If the matching is successful, you will hear 2 short tones from motorized
cylinder and your mobile phone will be master controller of motorized cylinder.
5. SETTING UP YOUR DEVICE
5.1. ENROLLING A MOBILE PHONE AS MASTER CONTROLLER
NOTE: For Android phones, when you are installing the app, it will ask permissions. All the requested permissions need to be
given without any restriction. Otherwise, the app may not work properly.
For how to video, please click on the link https://www.youtube.com/watch?v=kjLH2HGA7k8
8
5.2. APPLICATION SETTINGS
If you touch the menu button in the top right corner when it is not connected to motorized cylinder, you will reach settings
menu of application. Related menu items are as follows:
PASSWORD: You can disable, enable or change the password of
application.
LANGUAGES: You can change language of the application.
APPLICATION INFO: You can see the version of installed application.
VIDEOS: You can watch our support videos.
FAQ: Frequently Asked Questions and answers
Menu
Button
9
5.3. MOTORIZED CYLINDER SETTINGS / ADMINISTRATION MENU
If you touch the menu button in the top right corner when the application is connected to motorized cylinder as master
controller, you will reach to settings menu of connected motorized cylinder. You can change settings of your motorized
cylinder and perform administrative activities via this menu.
Before using your smart cylinder, “locking way” and “number of turns” settings must be adjusted properly. Otherwise, it
will damage the device’s mechanical structure.
Related menu has 4 tabs: Device Info, Knob Settings, Users, Reports
5.3.1. DEVICE INFO TAB
In this tab, you can see following information:
Device Name
Favorite Device
Battery
Users
Operations
Device Type
Software Version
If you want to delete connected device from your mobile application,
touch the “Delete Device” button in this menu.
Menu
Button
Device Info Tab
10
5.3.2. KNOB SETTINGS TAB
In this tab, there are following menu items:
SETUP WIZARD: You can reach quick setup settings and easily follow steps.
DELAYED LOCKING: If this feature is enabled, the device will lock the door
10 seconds after the locking button on the device is pressed. When you are
going out, if you press the locking button on the device and than close the
door, it will automatically lock your door in 10 seconds.
AUTO LOCK: Your device has an automatic locking feature which let the
device locks itself -either one turn or full turns- automatically in 15, 30, 45
or 60 seconds after it is unlocked. If you enable auto-locking, you will see
DAY MODE setting which gives flexiable options for office use.
If DAY MODE is enabled, you can define 1 or 2 periods for selected days, which
Auto-Locking will not work.
Menu
Button
Knob Settings
Tab
Otros manuales para Utopic R
1
Tabla de contenidos
Otros manuales de Cerrar de DESi
