3 Operating Instruction iCTmotor
• The iCTmotor should be operated by dentists or authorized specialists.
• Read this User’s Manual thoroughly before operation for the first time, in order to avoid unintended incidents or accident.
• If repair or inspection is required, please contact the nearest authorized dealer.
• Sterilize all subcomponents that are subject to sterilization before each operation for disinfection.
Detailed sterilization instruction is included in this manual.
• Put the handpiece on the handpiece rack for idling during usage.
• If any abnormal condition occurs, such as unusual noise or overheated components, please stop using the device and
contact the nearest authorized dealer for support
• The foregoing warranty shall not apply to defects resulting from unauthorized disassembling or using ingenuine
components or parts. In the event of modifications by third parties, the warranty shall become null and void.
We recommend using only genuine spare parts for the operation and repair of the iCTmotor.
• Do not place similar medical electrical devices near the iCTmotor as these devices may disrupt the performance of this
device. To mitigate disruptive electromagnetic interference, position the iCTmotor away from RF transmitters and other
sources of electromagnetic energy.
• Dropping or exerting excessive forces onto the device may cause the device to malfunction or fail to meet the desired
performance standard.
• While the burr (cutting tool) is rotating, it should be handled with extra care to avoid injury of the user.
• Do not assemble or disassemble the handpiece with micromotor during operation. Before each usage, try to pull out the
handpiece from the micromotor to make sure they are well assembled.
• To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth
• Do not modify this equipment without authorization of the manufacturer
• Do not put your hand in to the irrigation pump gap
In order to avoid personal injury or property damage, please observe all safety precautions as specified in this
Operation instruction. Precautions are indicated as below.
2. Caution
The Dentium surgical micromotor iCTmotor and Implant system, are microprocessor driven surgical micromotors
used in implantology procedures. The Dentium surgical micromotors iCTmotor, consists of a microprocessor
controlled unit, foot pedal, electric micromotor, support rods and sterile, disposable, irrigation tubes.
DANGER
This symbol indicates hazadous situtions that might lead to serious physical injury or critical
property dama
1. Safety guidelines
WARNING
This symbol indicates dangerous siuation that might lead to physical harm or property damage.
NOTIFICATION
Indication for use
NOTIFICATION
This symbol indicates useful information or reference details for the user.
