Page 4of 6
How a parent would use this therapeutic learning device with their children
The SensoSphere-Learning Aid, should be placed in a room at forward eye level or higher front or side of sight where
student is present. Position on a shelf or table, but not on the floor. Moreover, it should be placed in an area where there are
no vibrations from walking or other sources. There is no upper time limit for this therapy. The color light therapy device
should be used for all homework assignments and weekend study periods. You will notice some behavior changes in a few
weeks. The exposure should be majority Relaxation mode (turquoise-blue color). If necessary due to hyperactivity or
anxiety, use Balance mode (magenta color) first. This therapy can also be used by the entire family in entertainment center
for stress relief in Relaxation mode. It will greatly enhance any room ambiance with beautiful color. In
addition, SensoSphere-LearningAid has music interactivity available to further your enjoyment. You will never get bored
since it uses complex algorithms programmed to always change configurations, patterns, and color along with the specific
desired entrainment range required for targeted therapy. We have now added Sleep Mode for individuals with sleep issues
which should be used prior to sleep time. It can also be used in bedroom as a sleep light.
The Three ‘SensoSphere-Learning Aid’THERAPY MODES
Light Mode #1: Relaxation
This mode is based on the “cool” colors, spanning the range of blue, turquoise and green. These
colors are known to soothe and calm down. They tend to reduce the pulse rate, blood pressure and
the respiration rate. This mode presents the light using slow, flowing rhythms, which invite peace
and serenity. Occasional glimpses of yellow-lime and magenta, which are more neutral colors, bring
a touch of overall balance. Fine light pulsations in the Alpha brainwaves range (8 to 12 Hz) enhance
the peaceful and relaxing effect.
The Relaxation mode always starts with a soft turquoise-blue color.
This mode is ideal when you feel stressed or tense, or when you want to calm restless thoughts or emotions.
It provides Learning and Creative energy and may be partnered with Balance mode. Example: 10-20 minutes
of Balance mode and 20-30 minutes minimum of Relaxation mode with no upper limits to time therapy. Our
classroom Case Study program indicates that this is the preferred mode of operation for behavior
improvement. This should be the preferred mode of operation.
When powered On, the ‘SensoSphere-Learning Aid’always starts in Relaxation Mode.
Light Mode #2: Balancing
This mode displays colors of the whole rainbow, providing a balanced “color bath”. The rainbow is
displayed in a variety of ways, going in turn through upwards, downwards and random sweeps of
the full color spectrum. All colors are presented in equal amounts, ensuring an overall harmonizing
effect. Subtle light vibrations in the Theta brainwaves range (4 to 8Hz, focusing on the Schumann
Resonance frequency of 7.83Hz) intrigue and inspire creativity.
The Balancing mode always starts with a magenta color.
This mode is beneficial at any time of the day and is compatible with almost any mood. It brings you back
into a neutral balanced state from almost any other mood state. It provides Learning and Creative energy
and should be first used then Relaxation mode for calmness. Example: If a child is hyperactive, you should
first use the Balance mode for 10-20 minutes and then change to Relaxation mode. Both modes of operation
should be used during the homework/study session for minimal of 30-40 minutes each day with no upper
limits to the time spent. It should also be used for weekend study period.
