DEMA 94235 Manual de usuario

REFRACTOMETER 0-32%

DEMA 94235

CONTENTS

1. Safety instructions..................................................................................3

1.1. Intended use...........................................................................................3

2. Assembly and construction ....................................................................3

3. Service ...................................................................................................4

3.1. Setting the zero-point .............................................................................4

3.2. Measuring...............................................................................................5

4. Maintenance...........................................................................................5

5. Disposal..................................................................................................6

6. Technical data ........................................................................................6

7. Conversion table ....................................................................................7

1. SAFETY INSTRUCTIONS

• Warning!

Technical changes can be made by manufacturer at any time

without prior notice and may not be taken into account in this

manual.

• Before use, always check the device to be properly assem-

bled tightened and without missing parts.

• Never use damaged device or device with missing parts.

If the device is damaged or have missing parts - contact

manufacturer or have otorised, qualied technician to service

the device.

• Always work carefully, with caution and do not work under

inuence of drugs, alcohol etc.

• Keep children and not working people away from working

area.

• Do not overload the tools, use correct tool for the task.

• Store packaging materials (foils, plastic bags, styrofoam,

etc.) in places out of reach of children, they can present dan-

gers (e.g. risk of su󰀨ocation).

1.1 INTENDED USE

• For determining sugar levels in liquids.

• Not suitable for aggressive liquids - acids, brake oils, lubri-

cants, gasoline, petrol, etc.

2. ASSEMBLY AND CONSTRUCTION

• The refractometer is deliverred assembled and ready for use.

3. SERVICE

3.1. Setting the zero point

• Open the cover plate of the refractometer.

• Drop 1-3 drops of distilled water on the prism surface with

the help of the pipette included in the set

• Close the cover plate very carefully and rmly - so the water

is distributed to the entire surface of the prism without bub-

bles and dry spots.

• Hold the refractometer with the cover against a light source

(like lamp).

• The calibration should be made in room tem-

perature (around 20ºC and wait around 30

seconds - for the temperature compensation to

take place.

• A light and dark area are now visible from the

ocular. The borderline between them indicates

the refractive index on the scale which is also visible on the

scale.

• Adjust the adjustment screw, to set the scale, so that the bor-

der line is exactly against 0.0%. For that purpose you must

remove the rubber cap on the screw and adjust it with the

trimming tool provided in the set.

Operation Manual for Hand-held Refractometer for

Brix measurement 28 to 62%

Product Layout

Specification:

Model: RBX2862

Measuring range: 28 ~62%

Display Resolution: 0.2%

Temperature Compensation: Automatic from 10 to 30degree Celsius.

(ATC model only)

Calibration:

1. Calibration should be made in an ambient environment of 20degree Celsius.

2. Open the Light Plate & place few drops of calibration fluid ½ fill the prism.

Model Calibration fluid Calibration Point

RBX2862 29.6% Sucrose Solution 29.6%

Alternative standards may be used.

3. Close the Light Plate. Ensure the water is spread across the entire surface of

the Prism. There must not be any bubbles or dry spots on the Prism, which is

cause by too little liquid use.

4. Wait for about 30 seconds, this is to allow the temperature compensation to

take place.

5. Hold the meter in the direction of light source and look into the Eyepiece.

6. Adjust the Focus Dial until image is clear and sharp. Each person has his own

focusing adjustment.

7. Remove the rubber cap on the Calibration knob, with the use of the provided

trimming tool and adjust it until the bottom line of the blue section is at 29.6%.

8. Calibration Completed.

9. Wipe dries the Light Plate and Prism with soft lint-free clothes before

proceeding with measurement.

Operation Manual for Hand-held Refractometer for

Brix measurement 28 to 62%

Product Layout

Specification:

Model: RBX2862

Measuring range: 28 ~62%

Display Resolution: 0.2%

Temperature Compensation: Automatic from 10 to 30degree Celsius.

(ATC model only)

Calibration:

1. Calibration should be made in an ambient environment of 20degree Celsius.

2. Open the Light Plate & place few drops of calibration fluid 1.2 fill the prism.

Model Calibration fluid Calibration Point

RBX2862 29.6% Sucrose Solution 29.6%

Alternative stanards may be used.

3. Close the Light Plate. Ensure the water is spread across the entire surface of

the Prism. There must not be any bubbles or dry spots on the Prism, which is

caused by too little liquid use.

4. Wait for about 30 seconds, this is to allow the temperature compensation to

take place.

5. Hold the meter in the direction of light source and look into the Eyepiece.

6. Adjust the Focus Dial until image is clear and sharp. Each person has his own

focusing adjustment.

7. Remove the rubber cap on the Calibration knob, with the use of the provided

trimming tool and adjust it until the bottom line of the blue section is at 29.6%.

8. Calibration Completed

9. Wipe dries the Light Plate and Prism with soft lint-free clothes before

proceeding with measurement.

Eyepiece

Calibration Knob

Focus Dial

Light Plate

Prism

Eyepiece

Calibration Knob

Focus Dial

Light Plate

Prism

Zero point

3.2. MEASURING

• Open the cover plate of the refractometer.

• Drop 1-3 drops of the liquid on the prism surface with the

help of the pipette included in the set

• Close the cover plate very carefully and rmly - so the water

is distributed to the entire surface of the prism without bub-

bles and dry spots.

• Hold the refractometer with the cover against a light source

(like lamp).

• Wait around 30 seconds - for the temperature compensation

to take place.

• A light and dark area are now visible from the

ocular. The borderline between them indicates

the refractive index on the scale which is also

visible on the scale. It indicates the measured

value.

4. MAINTENANCE

• After each use, clean the prism with a slightly moistened, soft

cloth.

• Clean the instrument before storage and after each use.

Residue left from liquids, can damage the prism surface.

• Do NOT immerse the instrument in water – if the view inside

the instrument becomes foggy, this means that water entered

into the body. In such case call a qualied technician to ser-

vice it or contact the dealer.

• Do NOT clean the prism with thinner / abbrasives, because

this will remove the special coating of the prism and damage

the instrument.

• Store only in dry and cool environment.

Making Measurement:

1. Open the light plate & place 2 to 3 drops of the test liquid on the prism.

2. Close the Light Plate. Ensure the water is spread across the entire surface of

the Prism. There must not be any bubbles or dry spots.

3. Wait for about 30 seconds, this is to allow the temperature compensation to

take place.

4. Hold the meter in the direction of light source and look into the Eyepiece.

5. Select the scale, which is the intended unit of measurement.

6. Take the reading from the scale on the line where the blue and white area

meets.

7. Wipe dry the Light Plate and Prism with a soft lint-free clothe after each and

every test and before storing away.

8. It is important to maintain the Light Plate and Prism dust and stain free in order

to have good repeatability measurement.

Precautions in Usage:

1. Clean the instrument between each measurement and before storage with a

soft cloth. Residue of samples stained on the prism could damage the coating

on the prism.

2. Do not measure with abrasive or corrosive chemicals. This will damage the

prism’s coating.

3. Do not immerse the instrument in water. If the view inside the Eyepiece

becomes foggy, water has entered into the body. Call a qualified service

technician or contact your dealer.

4. Do not clean the prism with thinner as this will remove the special coating on

the prism and damage the unit.

5. Do not store the instrument in a damp environment. Store only in a cool and

dry environment.

6. This is an optical instrument and requires careful handling and storage. With

care, this instrument will provide years of reliable service.

Making Measurement:

1. Open the light plate & place 2 to 3 drops of the test liquid on the prism.

2. Close the Light Plate. Ensure the water is spread across the entire surface of

the Prism. There must not be any bubbles or dry spots.

3. Wait for about 30 seconds, this is to allow the temperature compensation to

take place.

4. Hold the meter in the direction of light source and look into the Eyepiece.

5. Select the scale, which is the intended unit of measurement.

6. Take the reading from the scale on the line where the blue and white area

meets.

7. Wipe dry the Light Plate and Prism with a soft lint-free clothe after each and

every test and before storing away.

8. It is important to maintain the Light Plate and Prism dust and stain free in order

to have good repeatability measurement.

Precautions in Usage:

1. Clean the instrument between each measurement and before storage with a

soft cloth. Residue of samples stained on the prism could damage the coating

on the prism.

2. Do not measure with abrasive or corrosive chemicals. This will damage the

prism’s coating.

3. Do not immerse the instrument in water. If the view inside the Eyepiece

becomes foggy, water has entered into the body. Call a qualified service

technician or contact your dealer.

4. Do not clean the prism with thinner as this will remove the special coating on

the prism and damage the unit.

5. Do not store the instrument in a damp environment. Store only in a cool and

dry environment.

6. This is an optical instrument and requires careful handling and storage. With

care, this instrument will provide years of reliable service.













5. DISPOSAL

• Do not dispose with commonal waste.

• Dispose only on the proper places or contact DEMA or local

dealer or local recylcing point suitable for disposing such

tools.

6. TECHNICAL DATA

Measurement range: 0 – 32 %

Error / Accuracy ± 2 %

Shaft diameter 25 mm

Test glass 40 x 13 mm

Size 175 x 40 mm

Weight 140 g.

Operation Manual for Hand-held Refractometer for

Brix measurement 28 to 62%

Product Layout

Specification:

Model: RBX2862

Measuring range: 28 ~62%

Display Resolution: 0.2%

Temperature Compensation: Automatic from 10 to 30degree Celsius.

(ATC model only)

Calibration:

1. Calibration should be made in an ambient environment of 20degree Celsius.

2. Open the Light Plate & place few drops of calibration fluid ½ fill the prism.

Model Calibration fluid Calibration Point

RBX2862 29.6% Sucrose Solution 29.6%

Alternative standards may be used.

3. Close the Light Plate. Ensure the water is spread across the entire surface of

the Prism. There must not be any bubbles or dry spots on the Prism, which is

cause by too little liquid use.

4. Wait for about 30 seconds, this is to allow the temperature compensation to

take place.

5. Hold the meter in the direction of light source and look into the Eyepiece.

6. Adjust the Focus Dial until image is clear and sharp. Each person has his own

focusing adjustment.

7. Remove the rubber cap on the Calibration knob, with the use of the provided

trimming tool and adjust it until the bottom line of the blue section is at 29.6%.

8. Calibration Completed.

9. Wipe dries the Light Plate and Prism with soft lint-free clothes before

proceeding with measurement.

Operation Manual for Hand-held Refractometer for

Brix measurement 28 to 62%

Product Layout

Specification:

Model: RBX2862

Measuring range: 28 ~62%

Display Resolution: 0.2%

Temperature Compensation: Automatic from 10 to 30degree Celsius.

(ATC model only)

Calibration:

1. Calibration should be made in an ambient environment of 20degree Celsius.

2. Open the Light Plate & place few drops of calibration fluid 1.2 fill the prism.

Model Calibration fluid Calibration Point

RBX2862 29.6% Sucrose Solution 29.6%

Alternative stanards may be used.

3. Close the Light Plate. Ensure the water is spread across the entire surface of

the Prism. There must not be any bubbles or dry spots on the Prism, which is

caused by too little liquid use.

4. Wait for about 30 seconds, this is to allow the temperature compensation to

take place.

5. Hold the meter in the direction of light source and look into the Eyepiece.

6. Adjust the Focus Dial until image is clear and sharp. Each person has his own

focusing adjustment.

7. Remove the rubber cap on the Calibration knob, with the use of the provided

trimming tool and adjust it until the bottom line of the blue section is at 29.6%.

8. Calibration Completed

9. Wipe dries the Light Plate and Prism with soft lint-free clothes before

proceeding with measurement.

Eyepiece

Calibration Knob

Focus Dial

Light Plate

Prism

Eyepiece

Calibration Knob

Focus Dial

Light Plate

Prism

PERCENT DEGREE PERCENT DEGREE PERCENT DEGREE PERCENT DEGREE

10.0% 40.0º 15.1% 61.5º 20.2% 83.8º 25.3% 107.0º

10.1% 40.4º 15.2% 61.9º 20.3% 84.3º 25.4% 107.4º

10.2% 40.8º 15.3% 62.4º 20.4% 84.7º 25.5% 107.9º

10.3% 41.2º 15.4% 62.8º 20.5% 85.2º 25.6% 108.4º

10.4% 41.6º 15.5% 63.2º 20.6% 85.6º 25.7% 108.8º

10.5% 42.1º 15.6% 63.7º 20.7% 86.0º 25.8% 109.3º

10.6% 42.5º 15.7% 64.1º 20.8% 86.5º 25.9% 109.7º

10.7% 42.9º 15.8% 64.5º 20.9% 86.9º 26.0% 110.2º

10.8% 43.3º 15.9% 64.9º 21.0% 87.4º 26.1% 110.7º

10.9% 43.7º 16.0% 65.4º 21.1% 87.8º 26.2% 111.1º

11.0% 44.1º 16.1% 65.8º 21.2% 88.3º 26.3% 111.6º

11.1% 44.6º 16.2% 66.2º 21.3% 88.7º 26.4% 112.1º

11.2% 45.0º 16.3% 66.7º 21.4% 89.2º 26.5% 112.5º

11.3% 45.4º 16.4% 67.1º 21.5% 89.6º 26.6% 113.0º

11.4% 45.8º 16.5% 65.5º 21.6% 90.1º 26.7% 113.5º

11.5% 46.2º 16.6% 68.0º 21.7% 90.5º 26.8% 113.9º

11.6% 46.6º 16.7% 68.4º 21.8% 91.0º 26.9% 114.4º

11.7% 47.1º 16.8% 68.8º 21.9% 91.4º 27.0% 114.9º

11.8% 47.5º 16.9% 69.3º 22.0% 91.9º 27.1% 115.3º

11.9% 47.9º 17.0% 69.7º 22.1% 92.3º 27.2% 115.8º

12.0% 48.3º 17.1% 70.2º 22.2% 92.8º 27.3% 116.3º

12.1% 48.7º 17.2% 70.6º 22.3% 93.2º 27.4% 116.7º

12.2% 49.2º 17.3% 71.0º 22.4% 93.7º 27.5% 117.2º

12.3% 49.6º 17.4% 71.5º 22.5% 94.1º 27.6% 117.7º

12.4% 50.0º 17.5% 71.9º 22.6% 94.6º 27.7% 118.2º

12.5% 50.4º 17.6% 72.3º 22.7% 95.1º 27.8% 118.6º

12.6% 50.9º 17.7% 72.8º 22.8% 95.5º 27.9% 119.1º

12.7% 51.3º 17.8% 73.2º 22.9% 96.0º 28.0% 119.6º

12.8% 51.7º 17.9% 73.6º 22.0% 96.4º 28.1% 120.0º

12.9% 52.1º 18.0% 74.1º 23.1% 96.9º 28.2% 120.5º

13.0% 52.5º 18.1% 74.5º 23.2% 97.3º 28.3% 121.0º

13.1% 53.0º 18.2% 75.0º 23.3% 97.8º 28.4% 121.5º

13.2% 53.4º 18.3% 75.4º 23.4% 98.2º 28.5% 121.9º

13.3% 53.8º 18.4% 75.8º 23.5% 98.7º 28.6% 122.4º

13.4% 54.2º 18.5% 76.3º 23.6% 99.2º 28.7% 122.9º

13.5% 54.7º 18.6% 76.7º 23.7% 99.6º 28.8% 123.3º

13.6% 55.1º 18.7% 77.2º 23.8% 100.1º 28.9% 123.8º

13.7% 55.5º 18.8% 71.6º 23.9% 100.5º 29.0% 124.3º

13.8% 55.9º 18.9% 78.0º 24.0% 101.0º 29.1% 124.8º

13.9% 56.4º 19.0% 78.5º 24.1% 101.4º 29.2% 125.2º

14.0% 56.8º 19.1% 78.9º 24.2% 101.9º 29.3% 125.7º

14.1% 57.2º 19.2% 79.4º 24.3% 102.4º 29.4% 126.2º

14.2% 57.6º 19.3% 79.8º 24.4% 102.8º 29.5% 126.7º

14.3% 58.1º 19.4% 80.3º 24.5% 103.3º 29.6% 127.2º

14.4% 58.5º 19.5% 80.7º 24.6% 103.7º 29.7% 127.6º

14.5% 58.9º 19.6% 81.1º 24.7% 104.2º 29.8% 128.1º

14.6% 59.4º 19.7% 81.6º 24.8% 104.7º 29.9% 128.6º

14.7% 59.8º 19.8% 82.0º 24.9% 105.1º 30.0% 129.1º

14.8% 60.2º 19.9% 82.5º 25.0% 105.6º

14.9% 60.6º 20.0% 82.9º 25.1% 106.0º

15.0% 61.1º 20.1% 83.4º 25.2% 106.5º

7. Conversion table

Tabla de contenidos

Otros manuales de Equipo de laboratorio de DEMA

DEMA

DEMA 162HCGHT Manual de usuario

DEMA

DEMA 163CH Manual de usuario

DEMA

DEMA 633MB Manual de usuario

DEMA

DEMA 203BS-2EP Manual de usuario

DEMA

DEMA 633AG-1 Manual de usuario

DEMA

DEMA 633GAP Series Manual de usuario

DEMA

DEMA 163-2DF-2 Manual de usuario

DEMA

DEMA 292QD AERATING WAND Manual de usuario

DEMA

DEMA 681GAP-2P Manual de usuario

DEMA

DEMA Fusion One Instrucciones de montaje

DEMA

DEMA 700 Series Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario