DELVCAM DELV-HD7 Manual de usuario
1
DELV-HD7
HDMI-VGA-VIDEO MONITOR
With Dual Composite Video/Audio
USER MANUAL
Thank you for purchasing the DELVCAM HD-7 High Definition liquid crystal display monitor. This
product employs new integrate circuits and high quality TFT LCD modules. It operates with low power
consumption, emits no radiation, and is a compact form factor. The color TFTLCD is the most suitable
display for VGA,VCD, DVD and GPS system for motorcars and ships. It also can be used in the high
end media facilities for in-line monitoring of HDMI, VGA and Composite Video signals. This product is
manufactured to the highest standards and will operate well in all applications where performance is
demanded but for a cost effective price.
2
CONTENTS
1. PRODUCT DESCRIPTION --------------------3
DESCRIPTION OF MONITOR FUNCIONS --------------------3
REMOTE CONTROLLER --------------------4
MEDIA BREAKOUT CABLE --------------------5
2. MENU OPERATION --------------------6
SPECIFICATIONS:
DISPLAY PANEL TFT LCD 7” LCD MONITOR 144000 Pixels
RESOLUTION 800X480(VGA)
UP RESOLUTION 1920X1440(VGA)
BRIGHTNESS 300 cd/m2
CONTRAST 500:1
VIEWING ANGLE 70deg/70deg, 50deg/50deg (L/R, UD)
INPUT VIDEO 0.7 to 1.4Vpp/75 ohm(composite video)
VGA SIGNAL INPUT H:30 @60Hz, V:60@75Hz
SPEAKER Sensitivity: 250mW/8 ohms
COLOR FORMAT NTSC/3.58 PAL/4.43
POWER 12 VDC @ 10WATTS
SIGNAL INPUTS TYPE HDMI1.3, VGA, AV1, AV2 with Mono Audio
OPERATING TEMPERATURE -20deg C to 55deg C
DIMENSIONS 208mm(W) X 146mm(H) X 34mm(D)
8.9”W X 5.75”H X 1.34”D
To ensure the best use of the unit, please read this handbook carefully beforehand.
3
DESCRIPTION OF MONITOR FUNCTIONS
Picture 1（A）
1. Indicator light
2. : Power on/off
3. ：(VGA), AV switch.
4. ：Volume down or to adjust the value of setting function
5. Infrared receiving window
6. ：Volume up or to adjust the value of setting function
7. ：To activate OSD menu.
8. ：Selection key, to adjust phase directly.
9. ：Selection key, to adjust the brightness directly.
10. DC12V input jack( used when Media Breakout Cable is not used)
11. HDMI input jack
12. MEDIA BREAKOUT JACK
4
REMOTE CONTROL OPERATION
1. ：Power on/off
2. : MUTE
3. : To activate OSD menu.
4. : Volume down or to adjust the value of setting function
5. : Volume up or to adjust the value of setting function
6. : Selection key, to adjust the brightness directly.
7. : Selection key, to adjust phase directly.
8. : Aspect ratio switch,4：3/16:9
9. ：UP/ DOWN Switch
10. ：Right/Left Switch
11. ：AV1/AV2/ PC(VGA)Switch
5
MULTIMEDIA BREAKOUT CABLE: used to interface VGA/Composite Video/Audio
1. input end: connect to matching jack on monitor
2. 9-pin plug for VGA adapter(below)
3. Power jack 12 VDC input: This power input is the same as the chassis mounted
power jack
4. RCA jack for composite video 1 input
5. RCA jack for audio input
6. RCA jack for composite video 2 input
VGA INTERFACE CABLE: This cable is used for VGA signal interface.
The USB end is not used with this monitor.
1. 9-pin jack connect 9-pin plug match of cable above
2. USB: Not Used in this model
3. 15-pin VGA signal input end connect VGA port of the computer
6
Manual operation
After connecting power, the unit will be in standby state（red light）- Press ” ” on the unit or on the
remote controller, the buttons of the unit will blue light, at that time the unit begins to work. Press the
same button again the unit will return to its standby state (Note the blue button will black out in 5 or 6
seconds soon after you turn off unit.). Push “PC(VGA)/AV” on the unit or on the remote
controller to switch between AV and (PC)(VGA).
OSD in (VGA) mode：
OSD in AV mode：
You can press “ ”/“ ” on the unit or on the remote controller to select the items:
（COLOR） （ADJUST） （MENU） （EDIT） （VOLUME）， and confirm buy pressing
“ ”/“ ” on the unit or on the remote controller, then push “ ”/“ ” again to adjust the items.
Push “ ” to exit the OSD after your adjust。
7
Description of OSD：
In (VGA) mode：
（Color）：
After enter into “Color” item of OSD, use “ ”/“ ”to select and then push“”/“”to
adjust.
※Brightness: To adjust the brightness.
※Contrast: To adjust the contrast of image.
※Color Temp：To adjust the contrast of Color Temp.
Color temperature of OSD is adjustable. Press “</>”on the unit or on the remote controller to select
“Color Temp”, then you can choose to set color temperature such as: 6500 Ks, 7500 Ks or 9300 Ks
by pressing“ ”/“ ” . You can also adjust a color temperature that wants the options “USER"
then you can adjust RED, GREEN and BLUE at will by pushing“”/“” .
8
Note: when you select the “USER” item a mini box will appear in the right bottom corner of the OSD.
As pictured below.
（Adjust）：
※Auto Config：To adjust automatically .If the auto-adjust is not satisfy your request, you can
adjust manually.
※H Position：To adjust the picture in horizontal.
※V Position：To adjust the picture in vertical.
※Phase：To adjust the phase.
※Clock：To adjust the clock, make field and line synchronization.
（OSD）：
※Language：2 languages for OSD as below：
English 简体中文
※H Position：To adjust the OSD position in horizontal.
※V Position：To adjust the OSD position in vertical.
※OSD Timeout：To adjust the clock.
※Transparent：To adjust the level of transparency.
9
（Function）：
※Reset：Back to original setting.
※Display Ratio：To change the display ratio,16:9/4:3.
※LR Rotation：To change the picture left/right.
※UD Rotation：To change the picture up/ down.
（Sound）：
※Volume: To adjust the volume.
10
In AV mode：
（Color）：
※Brightness: To adjust the brightness.
※Contrast: To adjust the contrast.
※Hue: To adjust the hue adjust in NTSC mode.
※Saturation: To adjust the saturation.
（OSD）：
※Language：2 languages for OSD as below：
English 简体中文
※H Position：To adjust the OSD position in horizontal.
※V Position：To adjust the OSD position in vertical.
※OSD Timeout：To adjust the clock.
※Transparent：To adjust the level of transparency.
Tabla de contenidos
Otros manuales de Monitor de DELVCAM
DELVCAM
DELVCAM DELV-WFORM-7SDI Manual de usuario
DELVCAM
DELVCAM DELV-2LCD-7XLPRO Manual de usuario
DELVCAM
DELVCAM delv-hdmib Manual de usuario
DELVCAM
DELVCAM DELV-FPV-7 Manual de usuario
DELVCAM
DELVCAM DELV-12GSDI-15 Manual de usuario
DELVCAM
DELVCAM DELV-3GHD-17IRM Manual de usuario
DELVCAM
DELVCAM DELV-4KSDI28 Manual de usuario
DELVCAM
DELVCAM HD7 Manual de usuario
DELVCAM
DELVCAM DELV-2LCD-7XLPRO Manual de usuario
DELVCAM
DELVCAM DELV-HD7-HSC Manual de usuario
DELVCAM
DELVCAM DELV-PRO56 Manual de usuario
DELVCAM
DELVCAM DELV-WFORM-7 Manual de usuario
DELVCAM
DELVCAM DELV-3GHD-17RM Manual de usuario
DELVCAM
DELVCAM DELV-3LCD-3GHD Manual de usuario
DELVCAM
DELVCAM DELV-4KSDI24 Manual de usuario
DELVCAM
DELVCAM DELV-DUALFPV-7PL Manual de usuario
DELVCAM
DELVCAM DELV-HD7RM Manual de usuario
DELVCAM
DELVCAM DELV-HD7-4K Manual de usuario
DELVCAM
DELVCAM DELV-SDI-7 Manual de usuario
DELVCAM
DELVCAM DELV-HD7-HSC Manual de usuario
