Delta-Opti ATE-NTFT10-T3 Manual de usuario
Manufactured in China for:
DELTA-OPTI Monika Matysiak,
60-713 Poznan, 10 Graniczna St., Poland
www.shopdelta.eu
User Manual
ATE-NTFT10-T3
CONTENT
SPECIFICATION
Chipset Hi3520D V300
Screen Size 10.1INCH
Screen ratio 16:9
Black Light Luminance LED,500cd/m2
Resolution 1024*600
Operation Langue Chinese/English/Spanish etc
Viewing Angle Hor: L(70) R(70); Ver: UP(50) DOWN(70)
Image reversion UP/Down and Left/Right
Power requirement 12 / 24V DC , Range 11-32V DC
Power consumption ＜8W
Shockproof level 10G
Chipset HI3520D V300
DVR FEATURES
MONITOR SPECIFICATION
Language Chinese/English
System System Linux
Interface Visual GUI,Support Mouse
Record
Video Standard PAL/NTSC
Video Input 4-CH AHD Input
Resolution 1080P/720P
Image Quality 4 levels adjustable
Record Mode Boot Record
1. SPECIFICATINS 2.WIRE DRAWING 3. REMOTE CONTROL
4. MONITOR BUTTON 5.MENU INTRODUCTION
6.NOTE 7.BACK UP INTRODUCTION 8. FQA
Audio Input 1-CH Audio input
Audio Audio recording Audio & Video synchronized recording
Audio Compression G.711u
Video Search Recent 3 days/1 week/2 weeks etc
Playback ,search by time
4-CH Playback Support
Fast /Back Forward Support 2x/4x/8x Fast/Back forward Playback
SD Card Slot Support Max 512GB SD Card
Interface USB Port Support Mouse/USB Backup
I/O Input 4-CH I/O Alarm input
Reverse Line Support
Others
Voltage DC8-36V
Working Temperature -30℃ to +70℃
Humidity 20% to 80%
Dimension 150mm*88mm
Weight 0.78Kg
WIRE DRAWING
REMOTE CONTROL
MONITOR BUTTON
10.1 INCH
Menu AV1/AV2 — OK + Power IR
BUTTON DECRIPTION
Menu
Login/Logout Menu
AV1/AV2
-
IR
OK
+
Switch AV1/AV2 Video Input
Turn Over Main Menu Page
Go up in the sub menu
Reduce Number Value setup
Confirm Button
Left/Right Move
Go Down in the sub menu
Add Number Value Setup like time setup
Power
Press for a time, Shutt Off the Screen
Press for Long time, Shut Down Monitor
IR Led light for Remote control
Login Menu Button
ON/OFF Monitor Button
Function-01:Switch channels
1=CH1,2=CH2,3=CH3.....
Function-02: Input Number
to Setup time
Return/Canel/Exit Button
Login Info Menu
LEFT/RIGHT/UP/DOWN button
“OK” Confirm button
Login Playback Menu
Stop,Pause/Play,
Fast backward,Fast
Forward Buttons
MENU INTRODUCT
MENU-01: Login Monitor=> Main Menu
MENU-02: Click into “Record” To Playback/Backup the recorded videos
DESCRIPTION:
“Search for date”: Last three days,last 1 week, last 2 weeks,last 1 month or ALL to search out recorded videos
“Export”: Choose one day, like 2019-11-21,to back up the whole day video by USB Port
“Playback”:Playback the recorded video(Support Fast/back Forward,Stop etc Operation)
“Lock”: Check recorded videos=>Click “Lock” which will show red lock,the lock videos will not be overwrite.
“Unlock”: Unlock Locked Videos
“Backup”: Backup the checked videos
MENU-03: Click into “General Setting” To setup date time,date format,Video format etc
DESCRIPTION:
“Video Format”: PAL/NTSC Optional
“Time show”: Enable/Disable watermark the time into the recorded videos
“Resolution”: Video record resolution
“Quality”: Normal,Standard,Clear ,Clearest 4 Classes adjustable.
“Plate Number”: Enable to OSD plate number info into the recorded videos
MENU-04: Click into “Control Setting” To setup date time,date format,Video format etc
DESCRIPTION:
A. Always Output: After booting, Keep showing videos on Monitor
B.Trigger Output: After booting, Only alarm trigger to show videos on Monitor
C. Smart Output: After booting,Showing video on monitor, Will auto shut off without any operation in 15s
“Display switching”: After Alarm trigger Off, Video showing time
“Auto sequence”: The video image auto sequence time
“Record For Park”: Delay off time setup after engine off to keep recording. While voltage is lower DC10.5V,Montior will
auto shut down totally.
“Audio Recording”: Diable/Enable to record audio with video
“Video Output”:
MENU-05: Click into “Image Setting” To setup Guide line,Screen Margine, Mirror config etc
DESCRIPTION:
“Guide Line”: Reverse Line setup to guide the driver for reversiong
“Screen Margin”: To adjust screen Margin to full screen-(Less use)
“Color Config”: To adjust Channel videos Chroma,Sharp, brightness,Contrast etc
“Mirror Config”: To Adjust camera rotation direction.
“Record Mode”:The video Mode while video recording
“Power on Mode”:The video Mode while Vehicle Starting
“Display Mode”:Use remote control or ’Mode” button to switch Video Modes.
SUB-01: Guide Line Setup GUI
SUB-02: Screen Margin setup GUI
SUB-03: Color config Setup GUI
SUB-04: Mirror config Setup GUI
MENU-06: Click into “System Setting” To format SD Card,upgrade etc function
DESCRIPTION:
“Format”: Must Format SD Card for 1st time using
“Upgrade”: To upgrade Record Monitor via USB Port
“Restore”: Click “Confirm” to default factory setup
“Param config”: A. Export: Export Record Monitor parameters by USB Port
B. Import: Import the parameters into Record Monitor by USB Port
NOTED
1.Format SD Card:
2.Car Battery protection
Re:When insert new SD Card for 1st time use,Must format SD Card in the System Setting
Re:DVR can detect Car battery via ACC Port and while car battery voltage is lower DC10.5V,the DVr
will auto shut down to protect the car battery
Re:When we try to back up the recorded video in Dvr, Please kindly format U-Disk on computer in
3.Format U-Disk on Computer to back up:
advance but not format U-Disk on DVR.
Re:When connect I/O Sensor with turning trigger, when alarm trigger, relative video channels will be
4.I/O Trigger for Reversing,Turing etc Operation
full screen, whiel alarm trigger off, relative videos will auto back to normal video mode
Re: The DVR recorded videos without any encryption and can playback 4-ch videos at the same time
5.4-CH record videos to playback at the same time by any player software
by any players, Like media Player software,VLC etc
BACKUP BY USB
STEP-01: Insert USB Disk Into Computer=> Format By Fat32
STEP-02: After Format=>Insert into USB Port Of Monitor => Setup a detail date=> Click “Export” to back up whole
day recorded videos or Search Out videos list=>”Check”=> Click” Backup” button to back up
the recorded videos
Choose a detail day like
2019-11-21
After the date setup, Click ‘export”
to Export the whole day videos
Check Videos list that
you want
Click Backup button to
back up the checked videos
