Delta Electronics INX-1K Manual de usuario

www.deltapowersolutions.com

Delta UPS - Amplon Family

User Manual

The power behind competitiveness

INX Series, Single Phase

1/ 2/ 3 kVA

Amplon INX Series

Save This Manual

This manual contains important instructions and warnings that you should

follow during the installation, operation, storage and maintenance of this

product. Failure to heed these instructions and warnings will void the warranty.

User Manual (“Manual”), including but not limited to the contents, information,

and figures are solely owned and reserved by Delta Electronics Inc. (“Delta”).

The Manual can only be applied to the operation or the use of this product. Any

disposition, duplication, dissemination, reproduction, modification, translation,

extraction, or usage of this Manual in whole or in part is prohibited without the prior

written permission of Delta. Given that Delta will continuously improve and develop

the product, changes may be made to the information in this Manual at any time

without obligation to notify any person of such revision or changes. Delta will make

all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly

or implicitly, including but not limited to the completeness, faultlessness, accuracy,

non-infringement, merchantability or tness for a particular purpose of the Manual.

Table of Contents

III

Table of Contents

Chapter 1 : Important Safety Warnings------------------------------- 1

1.1 Transportation ---------------------------------------------------- 1

1.2 Preparation-------------------------------------------------------- 1

1.3 Installation--------------------------------------------------------- 1

1.4 Operation ---------------------------------------------------------- 2

1.5 Maintenance, Service and Faults --------------------------- 2

1.6 Packing List ------------------------------------------------------- 3

Chapter 2 : Installation and Setup ------------------------------------- 4

2.1 Rear Panel View------------------------------------------------- 4

2.2 Operating principle ---------------------------------------------- 6

2.3 Setup the UPS --------------------------------------------------- 6

2.4 Battery Replacement ------------------------------------------- 9

Chapter 3 : Operation -----------------------------------------------------10

3.1 Button Operation -----------------------------------------------10

3.2 LCD Panel--------------------------------------------------------11

3.3 Audible Alarm----------------------------------------------------13

3.4 LCD Display Wordings Index--------------------------------14

3.5 UPS Setting------------------------------------------------------15

3.6 Operating Mode Description---------------------------------19

3.7 Faults Reference Code ---------------------------------------21

3.8 Warning Indicator-----------------------------------------------22

Chapter 4 : Troubleshooting --------------------------------------------23

Chapter 5 : Storage and Maintenance -------------------------------25

Chapter 6 : Technical Specications ---------------------------------26

Chapter 7 : Warranty-------------------------------------------------------28

Amplon INX Series

Chapter 1 : Important Safety Warnings

Please comply with all warnings and operating instructions in this manual strictly.

Save this manual properly and read carefully the following instructions before

installing the unit. Do not operate this unit before reading through all safety

information and operating instructions carefully.

1.1 Transportation

zPlease transport the UPS system only in the original package to protect against

shock and impact.

1.2 Preparation

zCondensation may occur if the UPS system is moved directly from cold to warm

environment. The UPS system must be absolutely dry before being installed.

Please allow at least two hours for the UPS system to acclimate the environ-

ment.

zDo not install the UPS system near water or in moist environments.

zDo not install the UPS system where it would be exposed to direct sunlight or

near heater.

zDo not block ventilation holes in the UPS housing.

1.3 Installation

zDo not connect appliances or devices which would overload the UPS system (e.g.

laser printers) to the UPS output sockets.

zPlease do not attached half-sinewave load or motor load to the UPS.

zPlace cables in such a way that no one can step on or trip over them.

zDo not connect domestic appliances such as hair dryers to the UPS output sockets.

zThe UPS can be operated by any individuals with no previous experience.

zConnect the UPS system only to an earthed shockproof outlet which must be

easily accessible and close to the UPS system.

zPlease use only VDE-tested, CE-marked mains cable (e.g. the mains cable of

your computer) to connect the UPS system to the building wiring outlet (shock-

Chapter 1 Important Safety Warnings

proof outlet).

zPlease use only VDE-tested, CE-marked power cables to connect the loads to

the UPS system.

zWhen installing the equipment, it should ensure that the sum of the leakage cur-

rent of the UPS and the connected devices does not exceed 3.5mA.

1.4 Operation

zDo not disconnect the mains cable on the UPS system or the building wiring

outlet (shockproof socket outlet) during operations since this would cancel the

protective earthing of the UPS system and of all connected loads.

zThe UPS system features its own, internal current source (batteries). The UPS

output sockets or output terminals block may be electrically live even if the UPS

system is not connected to the building wiring outlet.

z In order to fully disconnect the UPS system, rst press the OFF/ ENTER button

to disconnect the mains.

z Prevent no uids or other foreign objects from inside of the UPS system.

1.5 Maintenance, Service and Faults

zThe UPS system operates with hazardous voltages. Repairs may be carried out

only by qualied maintenance personnel.

WARNING:

Risk of electric shock. Even after the unit is disconnected from the mains

(building wiring outlet), components inside the UPS system are still

connected to the battery and electrically live and dangerous.

z Before carrying out any kind of service and/ or maintenance, disconnect the bat-

teries and verify that no current is present and no hazardous voltage exists in

the terminals of high capability capacitor such as BUS-capacitors.

zOnly persons are adequately familiar with batteries and with the required pre-

cautionary measures may replace batteries and supervise operations. Unauthor-

ized persons must be kept well away from the batteries.

WARNING:

Risk of electric shock. The battery circuit is not isolated from the input

voltage. Hazardous voltages may occur between the battery terminals and

the ground. Before touching, please verify that no voltage is present!

Amplon INX Series

zBatteries may cause electric shock and have a high short-circuit current. Please

take the precautionary measures specied below and any other measures nec-

essary when working with batteries:

- remove wristwatches, rings and other metal objects

- use only tools with insulated grips and handles.

zWhen changing batteries, install the same number and same type of batteries.

zDo not attempt to dispose of batteries by burning them. This could cause battery

explosion.

z Do not open or destroy batteries. Escaping electrolyte can cause injury to the

skin and eyes. It may be toxic.

zPlease replace the fuse only with the same type and amperage in order to avoid

re hazards.

zDo not dismantle the UPS system.

1.6 Packing List

No. Item Q’ty

1UPS 1 PC

2Input cable 1 PC

3USB cable 1 PC

4User manual 1 PC

5Battery cable (for Extended Runtime Model only) 1 PC

6Screws and nuts (for Extended Runtime Model

only) 2 Sets

Chapter 2 Installation and Setup

2.1 Rear Panel View

zStandard Runtime Model

1 kVA 2 kVA

3 kVA

Chapter 2 : Installation and Setup

NOTE :

Before installation, please inspect the unit. Be sure that nothing inside the

package is damaged. Please keep the original package in a safe place for

future use.

Amplon INX Series

1 kVA 2 kVA 3 kVA

No. Item

1AC input

2Input circuit breaker

3USB port

4RS-232 port

5Mini slot

6Output socket

7External battery connector

8Output terminal

zExtended Runtime Model

Chapter 2 Installation and Setup

2.2 Operating principle

The operating principle of the UPS is shown as below

2.3 Setup the UPS

Step 1: Connect battery wires

If UPS is extended runtime model, please connect

external batteries as below chart.

Please refer to below chart to secure battery cable to

the terminal with supplied screws and nuts.

Amplon INX Series

Step 2: UPS input connection

Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using

extension cords.

zThe power cord is attached to the UPS. For the type of power cord, please refer

to the table below.

UPS Type of Power Cord

Standard Runtime

Model

1kVA Plug 10A INDIA

2kVA Plug 10A INDIA

3kVA Plug 16A INDIA

Extended Runtime

Model

1kVA Plug 10A INDIA

2kVA Plug 16A INDIA

3kVA Plug 16A INDIA

Step 3: UPS output connection

zFor socket-type outputs, simply connect devices to the outlets.

z For terminal-type outputs, please follow below steps for the wiring conguration:

1. Remove the small cover of the terminal block

2. Suggest using AWG12 ~ 10 or 3.3mm2~ 5.3mm2power cords for 3kVA.

Please also install a circuit breaker (40A) between the mains and AC input

of the UPS in 3kVA for safety operation.

3. Upon completion of the wiring conguration, please check whether the wires

are securely afxed.

4. Put the small cover back to the rear panel.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unión Postal Universal de Delta Electronics

Delta Electronics

Delta Electronics RT Series Manual de usuario

Delta Electronics

Delta Electronics DUPS-1232 Manual de usuario

Delta Electronics

Delta Electronics Amplon Family Manual de usuario

Delta Electronics

Delta Electronics N Series Manual de usuario

Delta Electronics

Delta Electronics 7KVA Manual de usuario

Delta Electronics

Delta Electronics GAIA Series Manual de usuario

Delta Electronics

Delta Electronics E series Manual de usuario

Delta Electronics

Delta Electronics NH Plus Series Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario