Contents
• Carefully read these instructions prior to installa-
tion.
• The unit must be installed in compliance with cur-
rent standards.
• Always switch off the mains before installing or
servicing the unit.
• Do not attempt to repair the unit yourself. After-sales
service is available.
• The diagrams provided are simplified for greater
clarity. Protective devices and other accessories
required by the standards are not illustrated.
Standard UTE NF C15-100 and good practice must
be complied with. Connected or nearby units must
not generate excessive interference (Directive
2004/108/EC).
• The GP8 RADIO PLC only works with a
RADIO DRIVER type of wireless programmer.
Warning
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Positioning the GP8 RADIO PLC . . . . . . . . . . . . 5
Connecting the GP8 RADIO PLC . . . . . . . . . . . . 6
Commissioning the GP8 RADIO PLC . . . . . . . . 10
Mounting / Positioning the RADIO DRIVER . . . . 12
Quick association of the GP8 PLC
to the Radio Driver and PLC receivers . . . . . . . 14
Setting the time on the RADIO DRIVER . . . . . . 17
Configuration . . . . . . . . . . . . . . . . . . . . . . . . 18
Basic configurations (menu 1) . . . . . . . . . . . . 19
Programming type selection . . . . . . . . . . . . . . . . . 19
Programming increment selection . . . . . . . . . . . . 19
Pilot Wire type selection . . . . . . . . . . . . . . . . . . . . 20
DHW status in absence mode . . . . . . . . . . . . . . . 20
Advanced configurations (menu 2) . . . . . . . . . 21
Modification authorisation . . . . . . . . . . . . . . . . . . . 21
Temperature correction . . . . . . . . . . . . . . . . . . . . . 22
Pilot Wire order selection . . . . . . . . . . . . . . . . . . . 22
Tariff reduction selection . . . . . . . . . . . . . . . . . . . . 23
