Delphi GT 280 Manual de usuario
Issued by
CTC Warren, Ohio
STC Saltillo, Mex.
February 2017
4 Way GT 280 Sealed Connection System
GT 2.8 Female Terminal System (Sealed)
ASSEMBLY MANUALS
PRE - ASSEMBLY
HARNESS ASSEMBLY
CAR ASSEMBLY
ASSEMBLY MANUAL - 33278895
The information contained in these assembly instructions is subject to alteration without prior notice and does not represent
any obligation on the part of DELPHI. All the information is correct at time of releasing. Reprinting or translation is not
permitted without written permission from DELPHI. © Copyright 2017 DELPHI. All rights reserved.
Developed by : Deniss Guerrero +52 (844) 438 90 60
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895
TABLE OF CONTENTS
3
PRE–ASSEMBLY SECTION
ASSEMBLY OF THE FEMALE CONNECTOR
5
List of Components & Exploded View
6
Step 1 –Insert Connector Seal
7
Step 2 –Install PLR to Pre-Stage Position
8
Step 3 –Assemble CPA to Pre-Stage Position (Optional Component)
9
Connector Assembly –Completed
9
HARNESS ASSEMBLY SECTION
ASSEMBLY OF THE FEMALE HARNESS ASSEMBLY CONNECTOR
10
List of Components & Exploded View
11
Step 1 –Identify Cavities
12
Step 2 –Assemble Cavity Plug (If Required)
12
Step 3 –Align Terminals Female 2.8 and Female Assembly
13
Step 4 –Insert Terminals Female GT 2.8 (Or Equivalent)
14
Step 5 –Lock PLR to Full-Stage Position
15
Harness Assembly –Completed
16
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895
TABLE OF CONTENTS
4
CAR ASSEMBLY SECTION
ASSEMBLY OF THE CONNECTION SYSTEM
17
List of Components & Exploded View
18
3D Model
19
Step 1 –Identify Index Features
20
Step 2 –Align Index Features and Mate Female Assembly and Mating Part Together
20
Step 3 –Lock CPA to Full –Stage Position (Optional Component)
21
Connection System –Completed Assembly
22
DISASSEMBLY SECTION
DISASSEMBLY OF THE CONNECTION SYSTEM
23
Step 1 –Move CPA to Pre-Stage Position (Optional Component)
24
Step 2 –Disconnect
25
Connection System –Completed Disassembly
25
REPAIR / REPLACEMENT SECTION
FEMALE CONNECTOR SUB COMPONENTS:
26
PLR Replacement –Step 1 (Remove PLR)
27
Step 2 (Install PLR)
28
TERMINAL F 2.8 Replacement –Step 1 (Remove Terminal)
28
Step 2 (Insert Terminal)
30
Recommended Repair Tools
31
REVISIONS
32
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895
4 Way GT 280 Sealed Connection System
ASSEMBLY OF THE
FEMALE CONNECTOR
5
CONNECTOR ASSEMBLY
PRE - ASSEMBLY HARNESS ASSEMBLY CAR ASSEMBLY
ASSEMBLY
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895 6
Pictures used in this Assembly Manual and original parts may differ in some
details. These differences have no influence on the assembly process.
ASSEMBLY
FEMALE CONNECTOR
QUANTITY COMPONENTS
1 PLR
1 CONNECTOR SEAL
1 FEMALE CONNECTOR
1 CPA *
LIST OF COMPONENTS & EXPLODED VIEW
CONNECTOR
SEAL
CPA *
PLR
*OPTIONAL COMPONENT
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895 7
STEP 1a –Insert Connector Seal
STEP 1b –Insert Connector Seal
ASSEMBLY
CONNECTOR SEAL ASSEMBLED
VERIFY THE ORIENTATION OF THE SEAL AND INSERT IT INTO THE CONNECTOR
IMPORTANT! VERIFY THAT CONNECTOR SEAL IS NOT BUNCHED OR ROLLED
DURING THE INSERTION
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895 8
STEP 2a –Install PLR to Pre-Stage Position
STEP 2b –Install PLR to Pre-Stage Position
ASSEMBLY
IDENTIFY THE CORRECT ORIENTATION
OF THE PLR
PLR IS NOW
IN PRE-STAGE POSITION
INSERT PLR ONTO THE CONNECTOR
VERIFY AUDIBLE CLICK VERIFY THAT THE LOCKS ON CONNECTOR
ARE FASTENED ON THE PLR SLOTS
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895 9
STEP 3 –Assemble CPA to Pre-Stage Position (Optional Component)
FEMALE CONNECTOR ASSEMBLY –COMPLETED
ASSEMBLY
VERIFY AUDIBLE CLICK
CPA IS NOW
IN PRE-STAGE POSITION
IDENTIFY THE CORRECT ORIENTATION OF
CPA AND PUSH IT ONTO THE CONNECTOR
Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895
4 Way GT 280 Sealed Connection System
10
FEMALE ASSEMBLY
PRE - ASSEMBLY HARNESS ASSEMBLY CAR ASSEMBLY
ASSEMBLY
ASSEMBLY OF THE
FEMALE HARNESS ASSEMBLY
Tabla de contenidos
Otros manuales de Cables y conectores de Delphi
Delphi
Delphi MICRO 64 Manual de usuario
Delphi
Delphi 1.5 OCS Series Manual de usuario
Delphi
Delphi ATS Manual de usuario
Delphi
Delphi Delphi Manual de usuario
Delphi
Delphi 15336034 Manual de usuario
Delphi
Delphi 280 GT Manual de usuario
Delphi
Delphi HV-2000 Manual de usuario
Delphi
Delphi 101 Manual de usuario
Delphi
Delphi BTS Series Manual de usuario
