4
Capture button: In real-time image mode, press this button to take pictures.
Video button: In real- time image mode, press this button to start or stop recording
Menu button: Press this button to enter the menu interface when it is in real-time
image mode.
Ok button: To confirm the item that was chose.
Power on/ off and return button: Press this button for about 2 seconds to turn on,
and then entering real-time image mode; Press this button again for 3-5 seconds,the
system prompts whether to shut down,press”OK”to turn off.
When the system is working, shortly press the button, the system entering
power-saving sleep state,and then press it again, waking up the device to work.During
work.There is no any respond when operating the system, press this button to reset,
also this button has the returning function.
LED +：LED +.
LED -：LED -.
Charging indicator: this indicator is on when charging.
Up/down bending control knob
When up/down bending lock button is under non-locking condition,turn knob to
control the up/down bending angle
Left/right bending control knob
When left/right bending lock button is under non-locking condition,turn knob to
control the left/right bending angle
Up/down bending lock button
To lock the bending part position after confirm the up/down bending angle
Left/right bending lock button
To lock the bending part position after confirm the left/right bending angle
