Dell PowerEdge 7250 Guía de inicio rápido
www.dell.com | support.dell.com
About Cautions
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Upgrading to Intel®Itanium®2 9-MB Core
Processors
This document provides instructions for installing Intel Itanium 2 9-MB core processors with a
minimum speed of 1.5 GHz in your Dell™ PowerEdge™ 7250 system. You must follow a special
process to ensure the correct installation of the processors and their unique BIOS version.
NOTE: See the Product Guide for detailed instructions on removing or installing components.
NOTICE: All microprocessors must be of the same type and have the same L2 and L3 cache sizes.
Updating the BIOS
NOTE: Before starting,Dell recommends that you record any modifications made to the default settings
of the BIOS setup and EFI Boot Manager. This process restores all default settings and deletes any Boot
Manager options that have been added (including operating system boot options).
1
Download the latest 9M processor BIOS update from the Dell Support website at
support.dell.com
. Write down the BIOS version number for later reference.
2
Using the instructions in the
Readme.txt
file in the BIOS update, create a BIOS recovery CD.
3
Insert the
CD into the CD drive.
4
Power down the system by pressing and holding the power button on the front panel for
several seconds.
5
Unplug both AC power connectors.
Installing the New Processors
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the
online or telephone service and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that came with the product.
1
Remove the processor/memory module. See "Removing the Processor/Memory Module" in
the
Product Guide
.
August 2004
www.dell.com | support.dell.com
2
Open the module to the appropriate side for the processors that you are replacing.
• For processor 1 or 3, see "Processor/Memory Module Primary Side Access" and "Primary
Side Component Location" in the
Product Guide
.
• For processor 2 or 4, see "Processor/Memory Module Primary Side Access" and "Primary
Side Component Location" in the
Product Guide
.
3
Remove any dual in-line memory modules (DIMMs) that block removal of the processors.
See "Removing and Installing DIMMs" in the
Product Guide.
4
Remove the power pods associatedwith the processors that you are removing. See "Removing
a Power Pod" in the
Product Guide
.
5
Remove the processors or thermal blanks to be replaced. See "Handling the Intel Itanium 2
Processors," "Removing a Processor," and "Removing a Thermal Blank " in the
Product Guide
.
6
Install the new processors. See "Handling the Intel Itanium 2 Processors" and "Installing a
Processor" in the
Product Guide
.
7
Install the power pods. See "Installing a Power Pod" in the
Product Guide
.
8
Replace any DIMMs that you removed in step 2. See "Removing and Installing DIMMs" in
the
Product Guide.
9
Close the processor/memory module. See "Processor/MemoryModule Primary Side Access" or
"Processor/Memory Module Secondary Side Access" in the
Product Guide,
as explained in
step 2.
10
Replace the processor/memory module.
Rebooting Your System
1
Reconnect the AC power cords and press the power button. A full beep indicates that the
system is reading the CD
.
2
Wait two minutes; two beeps sound to indicate that the BIOS recovery has been successfully
completed. The system automatically reboots.
3
Remove the CD.
4
After the system reboots, press <F2> to enter the BIOS setup.
5
Verify that the BIOS version number in the Main Menu matches the one that youwrote down
in step 1 of "Updating the BIOS."
6
Restore any BIOS setup and Boot Manager settings documented in "Updating the BIOS."
www.dell.com | support.dell.com
____________________
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarksusedinthistext:Dell,PowerEdge,andtheDELLlogoaretrademarksof Dell Inc.;IntelandItaniumare registered
trademarks of Intel Corporation. Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names
other than its own.
Otros manuales para PowerEdge 7250
1
Tabla de contenidos
Otros manuales de Servidor de Dell
Dell
Dell PowerEdge 1300 Manual de instalación y operación
Dell
Dell ECS EX Series Instrucciones de instalación
Dell
Dell External OEMR R520 Guía de inicio rápido
Dell
Dell PowerEdge T100 Manual de usuario
Dell
Dell PowerEdge M820 Systems Manual de usuario
Dell
Dell DL4300 Manual de usuario
Dell
Dell External OEMR XL R610 Guía de inicio rápido
Dell
Dell PowerEdge R6625 Manual
Dell
Dell 8 Manual técnico
Dell
Dell XC730xd Manual de usuario
Dell
Dell PowerEdge T710 Manual de usuario
Dell
Dell PowerEdge 6350 Manual de usuario
Dell
Dell PowerEdge R910 Manual técnico
Dell
Dell PowerEdge C6220 Manual de usuario
Dell
Dell EMC PowerEdge R7515 Manual
Dell
Dell PowerEdge 1600SC Manual de usuario
Dell
Dell PowerEdge 1400SC Manual técnico
Dell
Dell PowerVault MD3200i Series Manual de usuario
Dell
Dell PowerEdge R900 Manual de usuario
Dell
Dell PowerEdge M820 Systems Manual de usuario
