Page 8
Package contents
Accessories supplied may vary
depending on the appliance model.
Not all accessories in the user
manual may be in your appliance.
3. Installation
Preparation of location and
installation for the appliance is
the customer’s responsibility.
DANGER: The appliance must be
installed in accordance with all
local electrical regulations.
DANGER: Prior to installation,
visually check if the appliance has
any defects on it. If so, do not have
it installed. Damaged appliances
are a safety risk.
AC power must be taken from a
properly wired outlet. Insert the
plug completely into the socket. if it
is not, it could become abnormally
hot. Do not use an electric light
outlet. Never connect multiple
plugs to the same outlet.
Before installation
Cooking appliances generate considerable
heat. A safety distance must be left between
the appliance and the kitchen walls and
furniture.
x Surfaces, surrounding edges, synthetic
laminates and adhesives immediately
adjacent to the appliance should be able
to withstand temperatures of up to 100°C
without delaminating or discolouring.
Do not place the appliance next to
refrigerators or freezers. The heat
emitted by the appliance will lead to
an increased energy consumption
of cooling products.
The door and/or handle must not
be used for lifting or moving the
appliance.
Do not place any objects onto the
appliance and move it in upright
position.
Check the general appearance of
your appliance for any damages
that might have occurred during
transportation.
DANGER: Risk of electric shock,
short circuit or fire by damage of
the mains lead! The mains lead
must not be clamped, bent or
trapped or come into contact with
hot parts of the oven. If the mains
lead is damaged, it must be
replaced by a qualified electrician.
DANGER: Risk of electric shock!
Before starting any work on the
electrical installation, please
disconnect the appliance from the
mains supply.
Final check
1. Connect the oven and switch on the
power.
2. Check the functions.
Electrical installation
This appliance must be earthed and the
manufacturer and the seller do not accept
responsibility for any damage due to
incorrect installation or electrical connection.
WARNING: Under no
circumstances should the bake
element be covered with aluminium
foil. Nor should a pan or tray be
positioned directly above the bake
element.
Doing so would reflect the heat from
the bake element downwards. Heat
to the oven would be restricted and
overheating of the space below the
element could result in damage to
the oven.
SAVE THESE INSTRUCTIONS
