Defiant DF-5939-BK Manual de usuario
THANK YOU
We appreciate the trust and condence you have placed in Deant through the purchase of this motion security light.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Deant!
USE AND CARE GUIDE
MOTION SECURITY LIGHT
Questions, problems, missing parts? Before returning to the store,
call Deant Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-866-308-3976
HOMEDEPOT.COM
Item #1000050242
Model #DF-5939-BK
2
Table of Contents
Table of Contents......................................2
Safety Information....................................2
Warranty ...................................................2
3-Year Limited Warranty ........................2
Pre-Installation.........................................3
Planning Installation ..............................3
Specications ........................................3
Tools Required .......................................3
Hardware Included.................................4
Package Contents ..................................4
Installation................................................5
Operation...................................................6
Care and Cleaning ....................................8
Troubleshooting ........................................8
Safety Information
PRECAUTIONS
ƑPlease read and understand this entire manual before attempting to assemble, install, or operate this light
xture.
ƑThis light xture should be installed outdoors to a wall.
ƑThe light xture should be mounted approximately 8 ft. (2.4 m) above the ground.
ƑDo not mix old and new batteries.
ƑDo not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
Warranty
3-YEAR LIMITED WARRANTY
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date
of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This guarantee does not include repair service, adjustment and calibration due to misuse, abuse or negligence, or
LEDs. Unauthorized service or modication of the product or of any furnished component will void this warranty in
its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use,
unauthorized service, or return shipping charges. This warranty is not extended to other equipment and components
that a customer uses in conjunction with this product.
Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com.
3 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before installing the light xture, ensure that all parts are present. Compare parts with the Hardware Included and
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this
light xture.
Estimated installation time: 30 minutes
SPECIFICATIONS
Range Up to 40 ft. (12 m) (Varies with surrounding temperature)
Sensing angle Up to 180°
Lumens 200
Power requirements “C” Alkaline Batteries (3x) (not included)
Operating modes Off, Auto
Time delay 10 seconds to 30 seconds
TOOLS REQUIRED
Phillips
screwdriver
1/8 in. Flathead
screwdriver Drill
Drill bits (3/32 in.
and 7/32 in.) Ladder
Safety goggles Level
4
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware shown to actual size.
AA BB CC
Part Description Quantity
AA Mounting screw 2
BB Wall anchor 2
CC Decorative screw (pre-installed) 1
PACKAGE CONTENTS
Part Description Quantity
A Lamp head 1
B Light xture 1
C Motion sensor 1
D Mounting plate 1
E OFF/AUTO switch 1
A
E
DB
C
5 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Installation
1 Determining the mounting
location
NOTE: The light xture should be mounted approximately
8 ft. (2.4 m) above the ground.
ƑDetermine the mounting location – wall mount
only.
ƑPosition the lamp head (A) in the general
direction of the desired light coverage.
Wall Mount
2 Removing the mounting plate
NOTE: This xture comes with a mounting plate (D). It is
pre-assembled on the light xture (B) for shipping.
ƑUnscrew the decorative screw (CC) in the bottom
of the xture (B).
ƑPress the button (1) on the top of the xture (B)
and pull the mounting plate (D) from the xture
(B) using the pull loop (2).
3 Installing the mounting plate
ƑPlace the mounting plate (D) against the
mounting surface and ensure the mounting
plate (D) is level.
ƑDrill two 3/32 in. holes (3) through the
mounting plate(D) and into the mounting
surface.
ƑIf mounting to a wooden surface, install
the two mounting screws (AA) through the
mounting plate (D) and into the mounting
surface.
ƑIf mounting to wall board or brick, remove
the mounting plate (D) and drill the
mounting surface using the 7/32 in. drill
bit. Insert the wall anchors (BB) and attach
the mounting plate (D) using the two
mounting screws (AA).
A
CC 2
D
3
D
1
B
D
AA
BB
6
Installation (continued)
4 Installing the batteries
ƑInstall three “C” batteries (not included) in the
rear battery compartment according to the
polarity markings located inside the battery
compartment.
NOTE: Ensure the ribbon inside the battery compartment
is located behind the batteries and the loose end of the
ribbon is accessible to help remove the batteries when
needed.
5 Mounting the light fixture
ƑPress the button (1) on the top of the mounting
plate (D) and slide the light xture (B) onto the
mounting plate(D).
ƑScrew the decorative screw (CC) in the bottom
of the xture (D) and tighten securely. Do not
overtighten.
Operation
1 Adjusting the lamp head
ƑIf needed, gently grasp the lamp head (A) and
tilt or rotate to adjust the light coverage area.
2 Using the OFF/AUTO switch
ƑToggle the OFF/AUTO switch (E) to auto when
motion detection lighting is desired.
ƑToggle the OFF/AUTO switch (E) to off to turn
the light (B) off and to conserve the battery life.
A
BDCC
1
BB
B
E
7 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Operation (continued)
3 Setting the sensor for testing
NOTE: When the “LUX” control is set to the “ + ” position,
the light xture will operate during the day or night. When
the “TIME” control is set to the “ – “ position, the light will
stay on for 10 seconds after all motion is stopped.
ƑToggle the OFF/AUTO switch (E) to the auto
position.
ƑGrasp the motion sensor (C) housing and rotate
right or left to access the controls.
ƑSet the “LUX” control to the “ + ” position.
ƑSet the “TIME” control to the “ – ”
position.
ƑSet the “SENS” control to the “ – ”
position.
NOTE: The motion sensor will need to completely warm
up (60 seconds) before beginning the setup process.
+–
LUX
+–
SENS
+–
TIME
4 Adjusting the motion sensor
detection zone
ƑPerform a “walk test”: walk in an arc across
the front of the motion sensor (C).
ƑWatch the light. The light will come on
indicating motion has been detected.
ƑStop, wait for the light to turn off, and then
begin walking again.
ƑContinue this process until the detection zone
has been established.
5 Adjusting the SENS control
ƑTo increase the detection zone, turn the
“SENS” dial toward the “ + ” position.
ƑTo decrease the detection zone, turn the
“SENS” dial toward the “ – ” position.
NOTE: The motion sensor (C) is more sensitive to motion
moving across the front of the sensor. The motion sensor
(C) is less sensitive to motion moving directly toward the
front of the sensor.
NOTE: The higher the “SENS” setting (sensitivity), the
greater the possibility of false triggering. To reduce false
triggering, turn the “SENS” dial toward the “ – ” setting.
+–
SENS
6 Adjusting the TIME control
NOTE: The “TIME” control determines the amount of
time the light will stay on full bright after all motion has
stopped.
ƑTurn the “TIME” dial toward the “ + ” position
to increase the light on-time (up to 30
seconds).
ƑTurn the “TIME” dial toward the “ – ” position
to decrease the light on-time (10 seconds
minimum).
+–
TIME
C
E
C
8
Operation (continued)
7 Adjusting the LUX control
NOTE: The “LUX” control determines how dark the
surrounding light level needs to be before the motion
sensor (C) will turn on the light when motion is detected.
ƑTurn the “LUX” dial toward the “ + ” position to
turn the light on when the surrounding light is
brighter (daytime).
ƑTurn the “LUX” dial toward the “ – ” position to
turn the light on when the surrounding light is
darker (nighttime).
LUX
+
–
8 Completing motion sensor
setup
ƑAfter all motion sensor (C) adjustments are
complete, rotate the motion sensor (C) so the
controls are facing the rear of the xture (B)
and the two dots are in alignment.
Care and Cleaning
ƑTo prolong the original appearance, clean the light xture with clear water and a soft, damp cloth only.
ƑDo not use paints, solvents, or other chemicals on this light xture. They could cause a premature
deterioration of the nish. This is not a defect in the nish and will not be covered by the warranty.
ƑDo not spray the light xture with a hose or power washer.
Troubleshooting
Problem Possible Cause Solution
The light will not come on. ƑBatteries are dead. ƑReplace the batteries.
ƑDaylight turn-off (photocell) is in effect. ƑRecheck after dark or turn
the “LUX” dial toward the
“ + ” position.
ƑThe outside air temperature is close to
the same as a person’s body heat.
ƑIncrease the “SENS”
setting.
The light comes on during the
day.
ƑThe motion sensor may be installed in a
relatively dark location.
ƑThe light xture is operating
normally under these
circumstances.
ƑThe “LUX” control is turned to the “ +”
position.
ƑTurn the “LUX” dial toward
the “ – ” position.
B
C
9 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
Problem Possible Cause Solution
The light comes on for no
apparent reason.
ƑThe motion sensor may be sensing
small animals or automobile trafc.
ƑDecrease the “SENS”
setting or reposition the
motion sensor.
ƑThe “SENS” control is set too high. ƑDecrease the “SENS”
setting.
ƑThe outside temperature is much
warmer or cooler than a person’s body
heat (summer or winter).
ƑDecrease the “SENS”
setting.
The lights stay on continuously. ƑThe motion sensor may be picking up a
heat source, such as an air vent, dryer
vent, or brightly painted, heat-reective
surface.
ƑDecrease the “SENS”
setting or reposition the
motion sensor.
The lights ash on and off. ƑHeat or light from the bulbs may be
turning the motion sensor on and off.
ƑReposition the lamp heads
away from the motion
sensor.
ƑHeat is being reected from other
objects and may be turning the motion
sensor on and off.
ƑDecrease the “SENS”
setting or reposition the
motion sensor.
Troubleshooting (continued)
Questions, problems, missing parts? Before returning to the store,
call Deant Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-866-308-3976
HOMEDEPOT.COM
Retain this manual for future use.
206926-01A
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Foco de Defiant
Defiant
Defiant H32-0C000XD19 Manual de usuario
Defiant
Defiant DFI-0452-WH Manual de usuario
Defiant
Defiant CD-5928-WH-A Manual de usuario
Defiant
Defiant FSL2030LDF Manual de usuario
Defiant
Defiant DFI-7005-WH-G Manual de usuario
Defiant
Defiant DF-5416-BK-B Manual de usuario
Defiant
Defiant DFI-0452-WH Manual de usuario
Defiant
Defiant DFI-7167-WH-G Manual de usuario
Defiant
Defiant DFI-0654-WH Manual de usuario
Defiant
Defiant DFI-8852-BZ-G Manual de usuario
Defiant
Defiant MSH27920DLWD Manual de usuario
Defiant
Defiant K40425002 Manual de usuario
Defiant
Defiant DFI-5892-WH Manual de usuario
Defiant
Defiant MST18920lwdf Manual de usuario
Defiant
Defiant DFI-5998-BK Manual de usuario
Defiant
Defiant DFI-5851-BK Manual de usuario
Defiant
Defiant DF-5928-BZ-A Manual de usuario
Defiant
Defiant MSLED1801D Manual de usuario
Defiant
Defiant DFI-0452-WH Manual de instalación y funcionamiento
Defiant
Defiant DFI-7148-BK Manual de usuario
