Important Notice:
This document is provided as a guide line and must not be disclosed without consent of
DediProg. However, no responsibility is assumed for errors that might appear.
DediProg reserves the right to make any changes to the product and/or the specification at any
time without notice. No part of this document may be copied or reproduced in any form or by
any means without prior written consent of DediProg.
DP600, an new generation Tape Reel taping machine which has already taken patents in
several countries. Designed to be simple, easy operated; tape width adjustment can be
finished within 10 seconds without any tool. DP600 supports devices packaged in
8~88mm width tape. With advanced characteristics DP600 offers the best solution for
manufacturing process.
Precise Ball Screw synchronous parallel adjustment of the rail width, finish tape width
adjustment within 10 seconds without tools.
PSA (Press sensitive adhesive) and hot melt sealer.
Patent tenon positioning device of tape width, user can fine-tune the tape width.
Two sets of press blade moves up and down through precise rail and use micrometer to
synchronously adjust the position of upper press blade and blade base. Able to
independently control press, speed and temperature so that it can ensure the best sealing
quality.
Driven by Japanese SMC Ø 16mm cylinder. Changeable press blade & blade base and
easy maintenance.
Equipped with stepper motor to drive ratchet mechanism
Precise internal counter.
Dual desktop design: small device packing can be operated by 2 operators at the same
time.
Modular design and programmable control.
