WARNING
INSTALLING THE WATER PUMP
INSTALLING THE WATER PUMP
ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS
CAUTION
WARNING
WARNING
WARNING
The DDMMS is wired for 115V, single phase operation, and draws 12.4 AMPS at 115V. This is not a large load, however if the machine is
The DDMMS is wired for 115V, single phase operation, and draws 12.4 AMPS at 115V. This is not a large load, however if the machine is
operated on any circuit that is already close to its capacity, the circuit breaker may be tripped. If this occurs, eliminate other loads from
the circuit. A separate circuit protected by a 20 amp breaker is ideal. If other loads do not exist and power failure still occurs, have the
circuit inspected by a quali ed electrician. If a generator is used, use one rated at 3.5Kw minimum.
The recoil spring (part#??) should be lubricated with light machine oil prior to operation of the DDMMS Brick Saw.
The recoil spring (part#??) should be lubricated with light machine oil prior to operation of the DDMMS Brick Saw.
