DB Technologies Opera 10 Manual

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA 10 Rev 1.0 cod. 420120245

Quick start user manual

Section 1

The warnings in this manual must be observed together with the "USER MANUAL Section 2".

Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO Sezione2”.

Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG Abschnitt 2" beobachtet

werden”.

Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES

Section 2"

Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO”

Sección 2”.

A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAM GGIA B L GNA (ITALIA)

Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA 10 Rev 1.0 cod. 420120245

Thank you for choosing a dBTechnologies Product!

The new PERA 10 is a lightweight and versatile active speaker, designed for the use in live or installed scenarios. It

is equipped with one 1” compression driver (1.4” voice coil), and one 10” woofer (2” voice coil). The dispersion

pattern is asymmetrical on vertical axis, and it is diversified (top and bottom) on the horizontal one. This allows a

good coverage also in case of reverberant environment. The double combo input (with source type selection and

independent levels) allows an easy and versatile use. For example PERA 10 can be used in a live scenario, mixing

two channels (a voice connected to channel 1, a high impedance source like an instrument connected to channel 2).

The amplifier (600 W RMS) is controlled by a powerful DSP, which use FIR filters in audio real-time processing. Eight

presets are available for different equalization settings, in stacked or wedge use. Various optional accessories are

available for all configuration needs.

Check the site www.dbtechnologies.com for the complete user manual!

1) Unpacking

The box contains:

N°1 PERA 10

N°1 Mains cable

This quick start and warranty documentation

2) Easy installation

PERA10 is equipped with:

Upper (A) and side (B) handles, which allow an

easy displacement

Tilted side (C) for monitor (wedge) positioning

Pole mount (36 mm) (D) for tripod stand

mounting

All those mechanical particulars were thought for an

easy use and for different configuration needs. PERA

10 is perfect for gigging bands as well as

medium/small venues installations. The acoustical

design allows to face different environments. The

dispersion pattern is asymmetrical on the vertical axis,

and the horizontal coverage varies within position: It

is wider in the lower side and narrow in the upper one.

As shown in the following picture, the related

dispersion pattern data are:

a) vertical coverage: 85° asymmetrical (+25°/-60°)

b) horizontal coverage: 100° (85° in the upper part,

120° in the lower one)

The main admitted configurations, thanks also to

various accessories like wall bracket WB- P10, as

shown in the picture below, are:

X – on a tripod stand (the maximum admitted height

from floor and the base of loudspeaker is 1,6 m)

Y – with wall bracket in truss mounting (via aliscaff)

Z – wall mounted

W– wedge (monitor configuration on the stage)

For further information about accessories and

admitted configurations, please refer to the complete

user manual.

NEVER USE THE HANDLES T SUSPEND

THE SPEAKER!

Some installation examples:

on a 35 mm tripode stand,

Y-with wall bracket and truss

adapter for aliscaff mounting,

-wall-mounted,

W-wedge (in monitor

configuration)

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA 10 Rev 1.0 cod. 420120245

3) Connections and controls

All the connections and controls are in the amplifier

panel side:

1–Main controls, with DSP preset rotary,

ground lift switch and LEDs

2–Balanced output, with CH1/MIX selection

3–DSP Preset reference table

4–Combo input (CH1) with LINE/MIC sensitivity

switch and level control

5–Combo input (CH2) with LINE/INST sensitivity

switch and level control

6–Power switch

7–Mains input with fuse housing

a) Connect the audio inputs. It is possible to connect

up to two sources (4, 5). The combo connector allows

a TRS or XLR connection. In case of dynamic

microphone, plug it into CH1 and select “MIC” in input

sensitivity switch. In case of an instrument (high

impedance source), plug it into CH2 and select “INST”

in the related sensitivity switch. Put the levels of CH1

and CH2 temporarily to the minimum value.

b) If you need an output signal, set properly the output

mode (2), choosing between “CH1 Link” and “Mix

ut”. This selection allows the user to choose if the

signal of the input channel CH1 must be directly linked

in output, bypassing the possible CH2, or if it is

necessary to send the mix of CH1 and CH2 channels.

Then connect the “Balanced utput” (2) to another

PERA 10 or other dBTechnologies loudspeakers,

using a cable with XLR (balanced) connector.

c) Set properly the DSP preset rotary (1), choosing

between stacked “S” and wedge “W” configurations.

The reference table (3) is useful to show the settings

possibilities:

S1– Club, with frequencies enhanced for

small/medium indoor environment

S2– Vocal, for an optimization in vocal and

singing performances

S3– Bass reduction, with the use of high-pass

filter, especially indicated in low-frequencies

reverberant conditions

S4– Playback, for tracks (like mp3

reproduction)

S5– Bass boost, with a low-frequencies

enhancement

W2– Wedge Vocal, designed for voice

reproduction in monitoring (wedge) use

W3– Wedge Playback, designed for tracks

reproduction in monitoring (wedge) use

FLAT– For an equalization without

enhancement of a particular frequency band

d) Plug the mains input cable, and set the channels

level (4, 5) to the desired value. The Signal/ N led

starts blinking, signaling the presence of audio signal.

Check the site www.dbtechnologies.com for further

information and for the complete user manual!

www.dbtechnologies.com info@dbtechnologies-aeb.com

OPERA 10 Rev 1.0 cod. 420120245

Technical Data

Speaker Type: 2 way active speaker

Usable Bandwidth [ 10 dB]: 58 – 20000 Hz

Frequency Response [ 3dB]: 70 – 19600 Hz

Max SPL (1 m): 128 dB

HF compression driver: 1 " Exit

HF voice coil: 1.4”

LF: 10”

LF Voice Coil: 2”

Crossover frequency: 2000 Hz (24 dB/oct)

FIR filters: yes

Horizontal dispersion: 100° (85° up / 120° down)

Vertical dispersion: 85° (+25°/ 60°)

Amplifier

Amp Technology: Amp SMPS Power Supply

Amp Class: Class D

RMS Power: 600 W

Peak Power: 1200 W

Processor

Controller: 56 bit DSP, 24 bit/48 kHz AD/DA converter

Limiter: Peak, RMS, Thermal

Controls: Rotary encoder (8 presets)

Input

Mains connections: VDE

Signal Input: 2x Combo IN (MIC/LINE + MIC/INST)

Signal Out: (Balanced) 1x XLR OUT (CH1 Link/Mix OUT

selectable)

Mechanics

Housing: Polypropylene

Grille: Full grille

Rigging points: (2x) M10 on top + (1x) M10 on the rear

Pole Mount: yes, 35 mm diameter

Width: 300 mm (11.81 in)

Height: 552 mm (21.736 in)

Depth: 301 mm (11.85 in)

Weight: 12.3 kg (27.12 lbs.)

Download the complete user manual on:

www.dbtechnologies.com/EN/Downloads.aspx

EMI CLASSIFICATION

According to the standards EN 55103 this equipment is designed and suitable to operate in E3 (or lower E2, E1) Electromagnetic environments.

FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties.

For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check

all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the

loudspeakers outdoor avoid spots exposed to bad weather conditions.

Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by

inappropriate accessories or additional devices.

Features, specification and appearance of products are subject to change without notice.

dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change

or improve products previously manufactured.

Scan with your R Reader

App to download the

complete User Manual

Otros manuales para opera 10

Otros manuales de Oradores de dB Technologies

dB Technologies

dB Technologies OPERA LIVE Series Manual de usuario

dB Technologies

dB Technologies CROMO 8+ Manual de usuario

dB Technologies

dB Technologies DIGIPRO DVX DM28 Manual de usuario

dB Technologies

dB Technologies Opera D Manual de usuario

dB Technologies

dB Technologies VIO X205 Manual de usuario

dB Technologies

dB Technologies Opera REEVO 212 Manual

dB Technologies

dB Technologies Opera 208D Manual de usuario

dB Technologies

dB Technologies VIO C Series Manual de usuario

dB Technologies

dB Technologies VIO X310 Manual de usuario

dB Technologies

dB Technologies DVX P8 Manual de usuario

dB Technologies

dB Technologies Cromo + Series Manual de usuario

dB Technologies

dB Technologies CROMO 8+ Manual de usuario

dB Technologies

dB Technologies sya 10 Manual

dB Technologies

dB Technologies DigiPro OPERA D Series Manual de usuario

dB Technologies

dB Technologies VIO X310 Manual

dB Technologies

dB Technologies INGENIA IG1T Manual de usuario

dB Technologies

dB Technologies OPERA REEVO 210 Manual de usuario

dB Technologies

dB Technologies IS 210L Manual

dB Technologies

dB Technologies FIFTY Series Manual de usuario

dB Technologies

dB Technologies LVX XM15 Manual

dB Technologies

dB Technologies DVX HP series Manual de usuario

dB Technologies

dB Technologies OPERA UNICA 12 Manual

dB Technologies

dB Technologies IS115S Manual

dB Technologies

dB Technologies B-HYPE MOBILE Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario

dB Technologies opera 10 Manual

Manuales populares de Oradores de otras marcas