Daymak Boomerbuggy Split Manual de usuario
boomerbuggy split
User Manual
2
Safety
For your safety, please ensure the following:
• Check brakes, and that the brake sensors shut o power to the motor
• Check the air pressure of both front and rear res. The correct P.S.I. is listed on
each re
• Check both le and right turn signals and taillights work properly before riding
• Check and make sure that your mirrors are ghtened and allow for maximum
visibility
• Observe all trac rules, and do not operate in areas where motorized vehicles are
not allowed.
• Make sure that your baery power is sucient before you go out to ride
• If you bring your charger avoid shaking / raling charger while riding.
• Once the baery is fully charged remove the charger.
• Do not try to operate the unit while charging.
• Do not let anyone under the age of 16 years old operate this vehicle.
• Do not make sharp / abrupt turns at high speeds to avoid pping.
• Do not operate under the inuence of drugs or alcohol
• Do not completely submerge the unit in water
• Do not operate in harsh weather condions.
For any quesons or concerns please call
1-800-649-9320 or visit www.daymak.com
3
About Daymak
Daymak is one of Canada’s largest Alternave Vehicle providers. We design, engineer,
manufacture, import and repair everything from recreaonal dirt Mobility Scooters, go-
karts and electric golf cars to alternave transportaon soluons such as Mobility Scooters
electric scooters.
Our electric bicycles represent an energy-ecient and eco-friendly alternave for
people who need to get around the city. They greatly increase the praccality of bicycle
transportaon in urban centres. Cosng only a few cents to charge, an Mobility Scooter
can make city life more convenient and much less expensive.
While there are many new Green technologies that are sll in their infancy, electric bicycles
have been developing over the last 40 years or more. Mobility Scooter technology has
been dramacally rened since the introducon of the rst custom-conversion bicycles.
Today, electric bicycles are a supremely reliable and aordable means of transportaon.
Daymak is constantly developing new eco-friendly alternave transportaon strategies,
led by its own Research and Development department in Toronto, Canada. We are always
improving our products. Our innovave in-house engineering and quality tesng provide
customers with many new kinds of reliable, eco-friendly vehicles, designed to help change
the lives of our customers and the world.
Daymak warranes, services, and stocks parts for everything it sells. We support our
products. Please feel free to visit our website. You’ll nd the latest in cool transportaon
soluons, support for the products you’ve purchased and contact informaon.
4
Introduction
Mobility Scooters
Mobility Scooters represent a natural progression in the development of urban
transportaon. Using only small amounts of electricity, Mobility Scooters have the
potenal to radically reduce the amount of polluon in our cies. They are also very
quiet, so they do not add to the high levels of noise polluon which we oen take for
granted. They are easy, and usually free to park. They are unobtrusive and highly praccal
addions to the urban landscape.
Mobility Scooters are also inexpensive. They (currently) require no registraon, no
insurance, no licence and do not incur parking charges. Compared to internal combuson
engines, the engines in electric vehicles have fewer moving parts and require far less
maintenance. Your Daymak Mobility Scooter is the result of Daymak’s years of experience,
the highly trained technical skills of our sta, and careful ongoing design work by our
engineers. We hope you enjoy using this product and welcome any feedback that you
may have.
Liability
Daymak does not assume any liability for damages, loss of prots, or claims from third
pares due to improper use of this product. Daymak does not assume any liability for
damages due to problems with the product resulng from service by a third party that is
not cered by Daymak.
The informaon in this guide may be subject to change without noce. For the latest
informaon available, please contact your local Daymak dealer or visit our website.
We have taken all possible measures to ensure the accuracy and completeness of the
informaon in this guide. However, if you do nd anything missing, incomplete or wrong,
do not hesitate to contact us.
5
Table of Contents
• SAFETY 2
• ABOUT DAYMAK 3
• INTRODUCTION 4
• PART DIAGRAMS 6
• RIDING INSTRUCTIONS 7
• ASSEMBLING THE BOOMERBUGGY SPLIT 11
• THE BATTERY 12
• CHARGING YOUR MOBILITY SCOOTER 13
• UNDERSTANDING YOUR VOLTAGE 14
• CHARGING THE BOOMERBUGGY SPLIT 15
• OPERATION 17
• BRAKES 20
• SEAT 20
• ADJUSTING THE TILLER 21
• DISASSEMBLING THE SPLIT 22
• TECHNICAL DATA 23
• VEHICLE IDENTIFICATION NUMBER (VIN) 23
• MAINTENANCE AND TROUBLESHOOTING 24
• SPECIFICATIONS 2 7
6
Part Diagrams
Diagram 1: Boomerbuggy Split
This diagram illustrates the various parts of your mobility scooter. Please note that many of
these parts are not user-serviceable and should be repaired only by trained professionals.
This is especially true of the electrical systems and the mechanical components.
1. Mirror
2. Speed Dial
3. Throle
4. Arm Rest
5. Seat
6. Baery
7. Charge Port
8. Tire
9. Headlight
10. Basket
7
Riding Instructions
This guide assumes that you already know have operated a mobility scooter. If you have
never used a mobility scooter before, we strongly recommend that you read throught this
guide enrely before beginning to operate.
Cauon
Always make sure to be properly situated on the unit before turning it on and engaging
the throle. Failing to do so can potenally lead to injuries or damage of the vehicle.
Important Notes
• Obey the Law. Be sure to follow all provincial and city trac laws. This
includes obeying stop signs, checking carefully when turning, and riding
defensively. A mobility scooter is a motorized vehicle, and thus you must
follow the law.
• Stay sober. Never ride your mobility scooter while intoxicated. Mobility scooters can
cause harm to the rider and others if not operated properly and require full aenon
during operaon.
• Mobility scooters are to be rode on the sidewalk unless there is no sidewalk
present. Please be mindful of all pedestrians on the sidewalk and give ample noce
when passing by.
8
Items to Carry with the Electric Mobility Scooter
It is a good idea to carry the following items with you at all mes when you ride your
Mobility Scooter.
• The charger, to charge the mobility scooter in case the baery power runs
out.
• A lock, to secure your Mobility Scooter when you park it.
Inspecting your Mobility scooter
Always inspect your mobility scooter before you ride it, to make sure its safety features
are operang properly. Many accidents can be avoided with roune inspecons. Once you
are comfortable with your mobility scooter, you will be able to detect small changes in the
way it feels. If anything changes between uses, make sure to have it properly examined.
Also, be sure to listen for changes in the sounds your mobility scooter makes over me.
Any mechanical or power issues may have eects on the sounds the mobility scooter
makes.
Holding the Handlebars
As you with a bicycle place both your hands around the handle bars and make sure you
have a good grip on both. Using your ngers put your hands on the throle part of the
machine (for more detailed informaon please see the secon of the manual)
Turning your Mobility scooter On and Off
To turn on your mobility scooter, press the “ignion” buon, you can nd more detailed
informaon in the Operaon secon of this manual.
Warning
When you acvate the Mobility Scooter, the electrical system becomes live. Do not try to
aect changes to the Mobility Scooter (such as removing the baery or repairing electrical
components) while the Mobility Scooter is acvated. Turn the Mobility Scooter o and
remove the key before you aempt to access any of the electrical components. Also, the
baery carries a signicant electric charge and can injure people if not treated properly
and with respect.
9
Accelerating and Decelerating
The throle is on the handlebars (see Operaon for more informaon). Use this carefully
when situated on the mobility scooter to go forward and release to decelerate.
Warning
Do not acvate the accelerator unl you are seated on the mobility scooter and are ready
to accelerate. The mobility scooter can easily escape from your control, possibly injuring
you or others, and the mobility may be damage.
Stopping
Your Mobility Scooter has front and rear hydraulic disc brakes. These are acvated by
pressing the foot pedal (see the braking secon). YWhen the brakes are acvated, the
power to the engine is automacally turned o, unl you release the brakes. This allows
you to stop safely.
Safety Tips
• When you are traveling in wet weather, water may cause your brakes to funcon
less eciently because it reduces fricon between the brake pads and the wheels.
• Take care to slow down and give yourself more room to stop or slow if necessary.
• It is a good idea to have your brakes and brake pads checked regularly. The brake
pads will eventually wear down through fricon, and aer signicant use will have to
be replaced.
• Engage the rear brakes rst before the front brakes to avoid ipping the unit.
10
Signalling
The Horn
The mobility scooter has a horn. Use this when coming close to pedestrians to warn of
your passing. See the operaon secon for where to nd your horn and how to use it.
Lights
The headlight and tail light are useful features when you are riding at night or in dark
areas. They radically improve your safety on the sidewalk or road. The lights on your
mobility scooter consume some electricity. Keeping them on may reduce the maximum
distance you can travel on one charge by about 5 %.
Riding in Wet Weather
Your mobility scooter is designed to funcon in wet condions, such as when it is raining.
However, it is easy to slip when moving at high speeds. If it is very wet, be sure to avoid high
speeds. When you are traveling in wet weather, water may cause your brakes to funcon
less eecvely because it reduces fricon between the brake pads and the wheels. Take
care to slow down and give yourself more room to stop or slow if necessary.
The Motor and Water
Your mobility scooter is not designed to be immersed in water. Always ensure that the
water level does not go above the motor, to prevent water from geng inside of it. Water
in the motor can cause short-circuits and may damage the electrical systems in your
Mobility Scooter.
Riding in Cold Weather
Your mobility scooter is designed to operate year-round. However, in very cold condions
or when there is a lot of snow or slush on the ground, it is possible for the motor in the
mobility scooter to get wet or for the brakes to funcon less eecvely, just as it can
happen in wet weather. Below 10 degrees Celsius, the baery will not work as well as it
would in warmer temperatures. While Lithium-Ion baeries perform beer than Lead-
Acid baeries in temperature extremes, both will experience reduced performance in
cold temperatures.
Also, riding the mobility scooter in cold temperatures may require you to replace the
baery sooner rather than later.
Tabla de contenidos
Otros manuales de Scooter de Daymak
Daymak
Daymak Photon Standard Manual de usuario
Daymak
Daymak Falcon RLC-11V Manual de usuario
Daymak
Daymak Utility Guía del producto
Daymak
Daymak Boomerbuggy Power Folding Manual de usuario
Daymak
Daymak Boomerbuggy X Manual de usuario
Daymak
Daymak Paris 36V Manual de usuario
Daymak
Daymak Vienna 84V 2019 Manual de usuario
Daymak
Daymak Roadstar Deluxe Manual de usuario
Daymak
Daymak Jena Manual de usuario
Daymak
Daymak Niagara Manual de usuario
Daymak
Daymak Boomerbeast 2D Manual de usuario
Daymak
Daymak Rickshaw Deluxe Manual de usuario
Daymak
Daymak Escooterinabox Deluxe Manual de usuario
Daymak
Daymak Boomerbugy II Manual de usuario
Daymak
Daymak Boomerbuggy Manual de usuario
Daymak
Daymak III series Manual de usuario
Daymak
Daymak Boomerbuggy Manual de usuario
Daymak
Daymak Rickshaw Manual de usuario
Daymak
Daymak Rickshaw King Manual de usuario
Daymak
Daymak Boomerbuggy X Pro Manual de usuario
